Suspension stuff...
 

Im going around and around on doing this suspension stuff. Grantelli Motorsports is tryin to talk me into doing a full tubular front suspesion. A-Arms, Coil overs, and K-member. For around $849.. then $400 for install.
I have busted motor/tranny mounts so they need to be pulled anyways to get fixed also.

I found a guy on the corral selling this..HAL TUBULAR K MEMBER 250.00..TUB A ARMS 250.00..COIL OVER KIT 225.00

are these a good deal? as good as granatelli's stuff? And Grantelli said it would take off around 200lbs on the front end of my car.

What other suspension sstuff should I have done? Springs at the same time too? My budgets coming close to an end as I have to get the Supercharger all dialed in too.

Recommendations?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

Are you thinking for the strip or for the road course?

Strip, but I like to handle fairly well on the street. I dont need an all out drag suspension, but 1.7 60's would be nice for a change.


Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

There is a group purchase on the D & D tubular front end kit for like $589 plus some other suspension parts. I can get the GP info if you'd like.

------------------
00 GT, MAC Offroad H, Pullies, 4.10’s, Flows, UPR shifter, subframes, LCA’s, air filter, Weld Pro Stars, Nitto DR’s 13.19@103.86 (1.82 60ft) 244.6 RWHP
M/M 100
88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool…