|
Whats your favorite and most useful mod?
Please dont say any power adder like nitrous or S/C.
|
So far it has been my exhaust. L/T's Pro Chamber, and cat-back - all MAC. It really opened her up. Most people would probably say gears but I haven't got those installed yet.
------------------ |
Trick Flow heads, then Disc Brakes!
------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback http://www.mustangworks.com/mustangs...1245-slot2.jpg |
Not trying to be a smarta$$, but an alarm! My car is basically stock-as-a-rock, but living in California and having my last car stolen, the alarm gives me the peace of mind to go ahead with other mods.
------------------ Greg 91 LX Convertible |
I don't really have any mods yet, but I love the sound of my Borla sidepipes. Gears, 01 heads and intake, under drives, and an H-Pipe are on the list but haven't happened yet.
Sidepipe ------------------ 66 Tahoe Turquoise Coupe Laser Red 96GT Ragtop Both are slow but easy on the eyes! [This message has been edited by Stefan (edited 02-09-2001).] |
The converter really lit a fire under my car's *** . I noticed more difference from that than from the gears.
------------------ 91 GT AOD Ultra Blue Metallic 3.73's, flows, PI Converter, 14.71@91.78mph |
THe very last mod I did was a offroad H-pipe. DAMN did it make a difference. ALmost more than the heads even. Maybe I had a clogged cat or something before, but it added like 50-60hp.
Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft. Added: B&M Ripper, Subframes, & Turndowns. |
Yeah I'm with sky... I did the off road h-pipe last and it made a huge difference! Although gears sure did help. http://www.mustangworks.com/interact...board/wink.gif
------------------ 89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on! Throttle Junkie Powered by Ford! 12.824 @ 107.05 MPH PVT Blankenship leaving for BCT 14MAR01 MOS 67 Romeo |
well, I am going to say it anyway....
nos nos nos nos nos nos nos..... well, that and subframes (verts twist so damn much) |
My Tri-ax shifter. I love the way it feels, and don't worry about breaking shift forks any more. Light Em Up!!! http://www.mustangworks.com/interact...oard/smile.gif
|
I guess you cant go wrong with the h-pipe http://www.mustangworks.com/interact...oard/smile.gif, i need one badly, but i would say i like my (electric fan) very useful if you know what i mean.
------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 97.80 Best 60': 2.0047 next mods: subframes, mac h-pipe |
my pro 5.0 shifter
|
If your talking power, then gears are gonna be the biggest difference!!! by far. then the h-pipe, cause you do loose alittle low end when you take out that bottle neck. the gear will compensate for that though http://www.mustangworks.com/interact...oard/smile.gif
my favorite was the tfs heads and the tfs intake http://www.mustangworks.com/interact...rd/biggrin.gif ------------------ Chris 99 GS-T http://i1b.yimg.com/1b/b96ea237/h/3c24a7c9/front.jpg |
Converting from speed density to mass air. The computer can finally agree with my 3.73's now. It used to ping like a can o' marbles up top with speed density, and now I can do all the mods I want without having to worry about that OR the 'pooter. I guess MAF was the "gateway" to future mods. Now I'll have a ride worthy to street race this summer. http://www.mustangworks.com/interact...rd/biggrin.gif
------------------ Capri306, Moderator, The Mustang Works Online 1979 Mercury Capri, 5.0L -- C4 -- 2.73 1987 Mustang LX Notch http://smilecwm.tripod.com/net3/wink2.gif <--- New Timeslips |
Nothin better than an h pipe and mean soundin mufflers.There could be a quite 10 second stang sittin next to a stock 5.0 with an exhaust and it will get more respect
------------------ 86GT-MACcatback-89heads,intake,TB,KENNYBROWNsubs,3.73's,HURST shifter,moser axels,svo rotors,calipers,94ponies going on soon |
I would have to say it is my 3:73 gears. I
love my car in 3rd. It feels like it just keeps going and going like the energizer bunny. ------------------ 94 Mustang Cobra: off-road h-pipe, 3:73 gears, motersports underdrive pulleys, MAC cold air induction, MAC 1 1/2 inch lowering springs, K&N Air filter, Maximum Motersports caster/camber plates. Soon my steeda tri-ax shifter. 94 Thunderbird SC: only mod is a K&N air filter. But she runs very well and hard. |
Im going to have to say gears too but my favorite has to be the Tremec-pro 5.0 combo.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
Sticky tires
|
The exhaust system, for sure... the headers, off roads and flowmasters... I just stand behind it when it's idling and LOVE the sound of it!! http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif http://www.mustangworks.com/interact...oard/smile.gif
------------------ Joe! 1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph! |
Besides heads, I have to say my lower control arms. Huge difference in the way the car preforms both launching and taking a tight turn. Cheap too.
------------------ 1995 GT Black sleeper Edelbrock 6037 heads,Edelbrock proformer intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter Flowmaster cat-back, Eibach pro rate springs lower control arms 3.73 gear Centerforce clutch |
| All times are GMT -5. The time now is 06:58 AM. |