Trunk Lid help????

fast5l · 10-27-2001, 12:47 PM

i have a 92 LX notchback (trunk) i wanted to know how to install the bars that go across the trunk to hold the trunk lid up when it is open???

please help

USMC302 · 10-29-2001, 05:49 PM

It should be in you local hanes manual but they are bendable flexable bars that basically put a spring loaded effect on the trunk, tey will have to be twisted and put inside the supplied hooks on each side of the trunk there should be three slots of adjustment. The bar's ends that are bent should end up facing you installed. Good Luck

------------------
88LX NOTCH 5.0, TFS Twisted Wedge Aluminum heads, 2.02 1.60 valves, BBK shorties unequal 1 5/8, off road H-pipe, Flowmasters, Drag lites, custom grind cam, solid motormounts, Aluminum Driveshaft, BBK springs, lakewood 90/10 50/50 shocks, BBK upper and lower control arms, 4.10 gears, centerforce DF clutch, adjustable BBK clutch cable with aluminum quadrant, Billet Steel flywheel, 70mm Acufab Throttle Body,MAC cold fender mount induction, K&N, 3 core radiator, flex-lite-fan, custom hardened push-

10-27-2001, 12:47 PM	#1
fast5l Registered Member Join Date: Oct 2001 Posts: 4	Trunk Lid help???? i have a 92 LX notchback (trunk) i wanted to know how to install the bars that go across the trunk to hold the trunk lid up when it is open??? please help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trunk lid	titanium92	Windsor Power	5	07-31-2004 11:48 AM
LX Coupe trunk lid?	titanium92	Appearance & Detailing	0	07-29-2004 11:27 AM
Rattling trunk lid	95GTS	Blue Oval Lounge	5	10-24-2003 08:10 AM
Trunk Paint Color?	Kisner	Classic Mustangs	3	09-05-2001 08:52 AM
HELP HELP HELP Stuck in the trunk!	Super_Stang	Windsor Power	5	07-29-2001 11:35 PM

10-29-2001, 05:49 PM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	It should be in you local hanes manual but they are bendable flexable bars that basically put a spring loaded effect on the trunk, tey will have to be twisted and put inside the supplied hooks on each side of the trunk there should be three slots of adjustment. The bar's ends that are bent should end up facing you installed. Good Luck ------------------ 88LX NOTCH 5.0, TFS Twisted Wedge Aluminum heads, 2.02 1.60 valves, BBK shorties unequal 1 5/8, off road H-pipe, Flowmasters, Drag lites, custom grind cam, solid motormounts, Aluminum Driveshaft, BBK springs, lakewood 90/10 50/50 shocks, BBK upper and lower control arms, 4.10 gears, centerforce DF clutch, adjustable BBK clutch cable with aluminum quadrant, Billet Steel flywheel, 70mm Acufab Throttle Body,MAC cold fender mount induction, K&N, 3 core radiator, flex-lite-fan, custom hardened push-