Friend Dyno #'s / Quarter Mile Times?

429mustang · 05-28-2004, 08:33 AM

We took my friend 91 Coupe to Dynotune Motorsports last night, it has the E7 power heads, comp cam (around 544 lift) systemax lower/stock upper extrude honed, roller rockers, 3.73 gears, bbk x-pipe/equal lengths, flowmaster 40's, C&L 76 meter/inlet tube. He made 259 hp/around 290 tq. Then after we dropped the fuel pressure twice he ended up making 270 hp, 309ft.lbs at the wheels. The guy there was thinking it should be goos for low 13's/high 12's with a good 60ft and good tires. What do you guys think? He's also gonna sell that intake and go with a Systemax II intake. Any suggestions?

420nitro · 05-28-2004, 11:09 AM

What gear???........3.73 - 4.10's???
If so with slicks, and a 5-speed.....I would say 12.60-12.90 range IF DRIVEN RIGHT @ 104-107mph.
Need like a 1.70-1.76 60'
And a 8.10-8.30 1/8 mile around 84-87mph.
I assume the dyno was a dyno jet pulled in top gear.
Let me know how off I was.

429mustang · 05-28-2004, 12:36 PM

It was a dynojet, gears are 3.73's.

420nitro · 05-28-2004, 01:33 PM

Let me know how it runs. Are you guys going to run it in the near future?
If it runs slower then 13.50's (on slicks) there is something deffinitley wrong!

GhOsT6_9 · 06-01-2004, 07:59 PM

Definitely low 13's probably high 12's. My car kicked out 238 RWHP and 280 RWTQ at SHM and I ran a 13.6 last weekend on DR's with a poor 60 ft

exgmguy · 06-02-2004, 05:09 PM

It should go mid-high 12's on a tire. I made 309 rwhp and wen 12.0's @ 112-113 on ET streets when my old car was on motor.

302 LX Eric · 06-03-2004, 08:01 AM

exgmguy - I thought you were dyno'd on a Mustang Dyno regarding that 309 rwhp number? If so, you would certainly make more (20-30 hp) on a DynoJet.

BTW - I just had Greg (now at Livernois) dyno my 331 (on the Mustang Dyno). Ended up with 330 RWHP and 355 RWTQ on a very safe (12.5:1 a/f) tune. Good guy to work with.

Take it easy,
E

05-28-2004, 08:33 AM	#1
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Friend Dyno #'s / Quarter Mile Times? We took my friend 91 Coupe to Dynotune Motorsports last night, it has the E7 power heads, comp cam (around 544 lift) systemax lower/stock upper extrude honed, roller rockers, 3.73 gears, bbk x-pipe/equal lengths, flowmaster 40's, C&L 76 meter/inlet tube. He made 259 hp/around 290 tq. Then after we dropped the fuel pressure twice he ended up making 270 hp, 309ft.lbs at the wheels. The guy there was thinking it should be goos for low 13's/high 12's with a good 60ft and good tires. What do you guys think? He's also gonna sell that intake and go with a Systemax II intake. Any suggestions? __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

05-28-2004, 12:36 PM	#3
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	It was a dynojet, gears are 3.73's. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.

06-01-2004, 07:59 PM	#5
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Definitely low 13's probably high 12's. My car kicked out 238 RWHP and 280 RWTQ at SHM and I ran a 13.6 last weekend on DR's with a poor 60 ft __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

06-02-2004, 05:09 PM	#6
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	It should go mid-high 12's on a tire. I made 309 rwhp and wen 12.0's @ 112-113 on ET streets when my old car was on motor. __________________ 1988 Mustang GT stock bottom 302, C4 10.9 @ 128 with 8 psi of Novi 1000 boost!----STOLEN 1989 Mustang notchback Warmed up 306 with a Procharger.

06-03-2004, 08:01 AM	#7
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	exgmguy - I thought you were dyno'd on a Mustang Dyno regarding that 309 rwhp number? If so, you would certainly make more (20-30 hp) on a DynoJet. BTW - I just had Greg (now at Livernois) dyno my 331 (on the Mustang Dyno). Ended up with 330 RWHP and 355 RWTQ on a very safe (12.5:1 a/f) tune. Good guy to work with. Take it easy, E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

05-28-2004, 11:09 AM	#2
420nitro Registered Member Join Date: Nov 2003 Location: Rockford Posts: 596	What gear???........3.73 - 4.10's??? If so with slicks, and a 5-speed.....I would say 12.60-12.90 range IF DRIVEN RIGHT @ 104-107mph. Need like a 1.70-1.76 60' And a 8.10-8.30 1/8 mile around 84-87mph. I assume the dyno was a dyno jet pulled in top gear. Let me know how off I was.

05-28-2004, 01:33 PM	#4
420nitro Registered Member Join Date: Nov 2003 Location: Rockford Posts: 596	Let me know how it runs. Are you guys going to run it in the near future? If it runs slower then 13.50's (on slicks) there is something deffinitley wrong!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with 1/4 mile times!!	HiFlow5 0	Windsor Power	9	09-18-2003 12:07 AM
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
1/4 mile times	GTvert	Modular Madness	17	05-22-2003 11:34 AM
Slicks + Suspension = .6 off 1/4 mile....new track times	84LX89GT	Stang Stories	6	05-14-2003 08:59 AM
quarter mile	gtjeremy	Modular Madness	7	02-18-2003 11:06 PM