MustangWorks.com : Ford Forums - View Single Post - Is this a project I could handle?!? (Intake, heads, cam...)

Dark_5.0 · 03-19-2002, 06:47 PM

I swapped my heads and intake about two weeks ago...It took me all day Saturday and half of Sunday to tear it down and get it back together.

I highly reccomend doing it yourself once you learn how to do it you never have to pay for labor again.

By far the hardest thing to me was swapping my gears from 2.73's to 3.73's.........It was a pain in the @ss to get just the right backlash.

Good luck,
Later

03-19-2002, 06:47 PM	#5
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I swapped my heads and intake about two weeks ago...It took me all day Saturday and half of Sunday to tear it down and get it back together. I highly reccomend doing it yourself once you learn how to do it you never have to pay for labor again. By far the hardest thing to me was swapping my gears from 2.73's to 3.73's.........It was a pain in the @ss to get just the right backlash. Good luck, Later __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer