MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-02-2004, 10:01 PM   #1
04S/CStallion
Registered Member
 
04S/CStallion's Avatar
 
Join Date: Mar 2004
Location: Loveland,Colorado
Posts: 44
Default Stock H Pipe????

What is up with four cats on my 04 GT. Do these cars have to have a lot of backpressure or what, I have never seen a car with four cats unless its in Cali. Im thinking about getting rid of the stock H pipe from the manifolds to the mufflers and replace it with a offroad X pipe and 2 chamber flows. Any opinions.
04S/CStallion is offline   Reply With Quote
Old 03-02-2004, 11:15 PM   #2
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

Justa a thought, as you used to drive a camaro, SLP makes an awesome exhaust now for the mustang called the SLP Loudmouth. A Cat back system is less than $350 and they have headers too as well as X pipes.

Going with an off-road X pipe and two chamber flows is a great option.

Check out www.mustangexhaust.com as they have hundreds of sound clips for all sorts of mustang exhausts that you can download.
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
Old 03-03-2004, 03:09 PM   #3
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default

Some 99+ Cali stangs have 6 cats (2 pre-heater and 4 cats).
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 03-03-2004, 03:18 PM   #4
GTvert
Registered Member
 
GTvert's Avatar
 
Join Date: Apr 2003
Location: West Plains
Posts: 74
Default

I know mustangs had 4 cats in 86, I think they were on there even before then.
__________________
Slower Traffic Keep Right
GTvert is offline   Reply With Quote
Old 03-03-2004, 09:54 PM   #5
RickKi1
Registered Member
 
Join Date: Mar 2001
Location: Burlington, NC 27215 USA
Posts: 9
Default

I have a Mac Cat H with 2 high flow cats that is supposed to pass emmissions (haven't tried yet, will know for sure in June), but it kept kicking the check engine soon light on, so I had to put mils eliminators on it to stop that. 99 GT.
__________________
www.v8stangs.com tech/super moderator.......99 GT Convertable, Gold chrome, S.S. Bumper lettering, Chrome AFS Cobra Rs 03 Cobra IRS, MM mount bushings, C&L maf, true flow inlet, ported intake plenum by Alameda Racing, Mac 70mm tbody, UD pulleys, Steeda timing adjuster, strut tower brace, Bullitt Fuel door, and more.
RickKi1 is offline   Reply With Quote
Old 03-03-2004, 10:23 PM   #6
04S/CStallion
Registered Member
 
04S/CStallion's Avatar
 
Join Date: Mar 2004
Location: Loveland,Colorado
Posts: 44
Default

Thanks for all the advise, I'm probably gonna go with the offroad pipe x pipe and 2 chamber flows, that should get out all the forced air in a quick enough fasion. I will definately check on the SLP stuff before I make my final decision. I can't wait to see what a difference its gonna make getting rid of all that restriction.
04S/CStallion is offline   Reply With Quote
Old 03-03-2004, 10:43 PM   #7
RickKi1
Registered Member
 
Join Date: Mar 2001
Location: Burlington, NC 27215 USA
Posts: 9
Default

You are aware of course that flowmasters don't even flow as well as your stock mufflers? Dynomax, Magnaflows, Macs, almost any of them flow better than flowmaster.
__________________
www.v8stangs.com tech/super moderator.......99 GT Convertable, Gold chrome, S.S. Bumper lettering, Chrome AFS Cobra Rs 03 Cobra IRS, MM mount bushings, C&L maf, true flow inlet, ported intake plenum by Alameda Racing, Mac 70mm tbody, UD pulleys, Steeda timing adjuster, strut tower brace, Bullitt Fuel door, and more.
RickKi1 is offline   Reply With Quote
Old 03-04-2004, 11:03 AM   #8
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by RickKi1
You are aware of course that flowmasters don't even flow as well as your stock mufflers? Dynomax, Magnaflows, Macs, almost any of them flow better than flowmaster.
I 2nd
blowmasters are just for sound no real power in them
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 03-04-2004, 06:55 PM   #9
04S/CStallion
Registered Member
 
04S/CStallion's Avatar
 
Join Date: Mar 2004
Location: Loveland,Colorado
Posts: 44
Default

Yeah i had heard that somewhere. Any opinions on Hooker mufflers? Or better yet my second choice is Borla, Im sure those will do great, what do yall think? Kinda sucks that such a good sounding muffler doesn't flow worth a damn.
04S/CStallion is offline   Reply With Quote
Old 03-04-2004, 07:14 PM   #10
RickKi1
Registered Member
 
Join Date: Mar 2001
Location: Burlington, NC 27215 USA
Posts: 9
Default

Nothing wrong with Borla, if you can afford them, by all means, I had some used ones on the V6 vert I used to have, loved them!
__________________
www.v8stangs.com tech/super moderator.......99 GT Convertable, Gold chrome, S.S. Bumper lettering, Chrome AFS Cobra Rs 03 Cobra IRS, MM mount bushings, C&L maf, true flow inlet, ported intake plenum by Alameda Racing, Mac 70mm tbody, UD pulleys, Steeda timing adjuster, strut tower brace, Bullitt Fuel door, and more.
RickKi1 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dont use 1.7 rockers with stock heads? Coupe5oh Windsor Power 10 11-28-2015 12:36 PM
h pipe or x pipe, and which ones apowers2k Modular Madness 3 02-10-2003 12:09 PM
polishing stock parts? scale Windsor Power 24 04-22-2002 11:57 AM
Stock Cam gtsr515 Windsor Power 1 04-03-2002 10:28 PM
LT's vs. shorties vs. stock headers jonnyk Windsor Power 9 01-01-2001 11:28 AM


All times are GMT -5. The time now is 02:00 PM.


SEARCH