© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
12-02-2001, 02:12 AM | #1 |
Registered Member
Join Date: May 1999
Location: moorpark ca
Posts: 340
|
crane cam dyno results are in ,kind of?
I went to get my car dyno tuned today but didn't get any tuning
something came up and he couldn't burn me a chip they gave me 3 pulls so he could get a baseline and have a program ready to try when i go back in two weeks. I made 285rwhp and 303rwtq. so I'm hoping i can hit the magic 300rwhp with a chip? the only mod I've done is the crane cams since my last dyno time. here is a direct comparison of stock 99 cams and my crane cams. I did have a little tuning done to get the 271rwhp(via timing adj and fuel psi reg) but the 285rwhp we didn't touch a thing. fyi. Leon
__________________
03 sonic blue cobra coupe, 11.49@122mph bakerfield raceway! 11.67@120mph fontana 98 GT, stock for now. |
12-02-2001, 03:03 AM | #2 |
The Redneck James Bond
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
|
Did you post prior to this about Crane Cams for a Mod motor? I thought I saw a prior post.
Anyway, I checked the Crane site and couldnt find any cams for the Mod motors. Are yours a Custom grind? If not, can you steer me in the right direction. How much did they cost ya? I'm considering camming my 2000 GT, if I find a good price of course.
__________________
64 1/2 "D" code Red Mustang Coupe. Red Baron, 2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars. Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod. |
12-02-2001, 06:38 AM | #3 |
Old School ROUSH
Join Date: Nov 1999
Location: Stockbridge, GA
Posts: 531
|
Good looking NA 4.6er,
|
12-02-2001, 11:39 AM | #4 |
Registered Member
Join Date: May 1999
Location: moorpark ca
Posts: 340
|
i don't think i posted earlier. crane doesn't advertise 4.6 cams. you basically send them your cams and they regrind them and send them back. I had an extra set of cams so i sent them in and then swapped the cams when they came back. it takes roughly 3 weeks mailing it on the ground. they are the cheapest I've found. it cost $305 for everyhthing. call the tech line and ask for dave maxwell he has the hook up for the mod motors. you may also want to consider a chip with the cams as my car does stall once in awhile at a stop light. fyi.
::Good looking NA 4.6er:: Thanks Leon
__________________
03 sonic blue cobra coupe, 11.49@122mph bakerfield raceway! 11.67@120mph fontana 98 GT, stock for now. |
12-04-2001, 01:11 PM | #5 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Your getting some awesome numbers there. Where did you go for the dyno this time? I really want to get back to the dyno and the track as soon as I can. My car is finally all up and running now so I am ready to go whenever.
285rwhp w/ out tuning is awesome! Skyler
__________________
2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others. |
12-04-2001, 08:58 PM | #6 |
Registered Member
Join Date: May 1999
Location: moorpark ca
Posts: 340
|
Thanks Sky! i went to morgan motorsports in the valley off of reseda.(dyno jet dyno unlike germansons )
http://www.mmsracing.com/ have you changed your email sky? i emailed you a couple times but never got a response?? i figured i probably screwed up some how! I want to get a chip programmed in a few weeks then I'm definately down for a carlsbad run!! maybe with your slicks a 12.9x et?????? Leon
__________________
03 sonic blue cobra coupe, 11.49@122mph bakerfield raceway! 11.67@120mph fontana 98 GT, stock for now. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
331 Dyno results | 302 LX Eric | Windsor Power | 12 | 04-29-2004 10:13 PM |
you will NOT believe this... dyno results | fiveohpatrol | Windsor Power | 27 | 11-27-2001 02:53 PM |
DYNO results, and questions | mmike | Windsor Power | 7 | 09-24-2001 09:11 PM |
Dyno results inside with timing adjuster installed | Mustang92 | Modular Madness | 7 | 02-20-2001 09:24 PM |