Rousche Intake for 5.0

fastang · 05-16-2001, 11:29 AM

Does anyone remember this thing? It was supposed to be the BEST and it was only offered by Rousche for the 94-95's. They wanted a grand for it! Does anyone have or use one, or know where I can get one cheaper? I want to put the absolute BEST on my stroker.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

fastang · 05-16-2001, 06:01 PM

Doesnt anyone know **** about this thing?

red82gt · 05-16-2001, 06:50 PM

I brlieve they decided that it was too expensive to continue production. Might as well contact Roush directly...

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

84_GT350 · 05-18-2001, 02:36 AM

Those things were so wicked. A big part of that price was to cover the cost of the special cowl hood you needed to make the kit effective I think. It had twin rear-facing throttle bodies and was worth (almost) an honest 40hp over stock. The real b!tch was that you HAD to have a cowl hood or else the thing didn't do squat. It utilized the low pressure area that was created at the cowl. Those things even looked mean.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

fastang · 05-18-2001, 02:16 PM

I work with a guy who has a friend that is sponsored by Roush. He's supposed to get me a price on one of these things. I sure hope I can afford it. I hope it got a little cheaper over time. I also heard 40 hp.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Moxie · 05-21-2001, 02:10 PM

Roush claims 47hp, and 120hp with mildly ported GT-40 heads. Roush is now selling whatever units they have left for $600. I would like to find someone who has actually used one.

------------------
Moxie Racing

The Nitrous Oxide Information Site

[This message has been edited by Moxie (edited 05-21-2001).]

SMOKE · 05-21-2001, 05:23 PM

The deal sounds very good, especially if you have worked heads.

Haven't heard of anyone with their intake.

------------------
K!
Personalized Black 98 SVO Blown Stage II ROUSH
without the side exhaust but some other cool stuff
Dyno 303rwhp 338rwtrq
Still working out the kinks!!!

tireburner163 · 05-21-2001, 10:53 PM

dang a grand for an intake

was it made of gold

------------------
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"

P.S. watch out cobra owners it's a freak

red82gt · 05-22-2001, 03:44 PM

It was more than just the intake, it had 24lb injectors, a 70 mm mass air, a 65mm throttle body, air filter, and cowl induction hood, add all those and the kit was a pretty good deal.

Skyman · 05-22-2001, 07:42 PM

Thats more than a good deal, thats damn cheap if you really got all that for a grand. Thats hard to believe. But now I see why they claim the big HP increase.

Jesse-skip it, You want bigger than a 70mm MAF and 65mm TB anyways, and probably 30lb injectors. I would go with the Vic JR, TFS, or holley intake. If your that worried about it, have it ported. There are plenty of good intakes on the market now.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Mustang owners get a 15% discount!
www.OJAIPCPROS.com

red82gt · 05-23-2001, 02:28 AM

Actually, I think it retailed for ~$1700, hood was carbon fiber though...I've also heard that you can buy just the bare intake part for $600(if there's any left) and it will leave those other intakes far behind in terms of flow and velocity.

In Ford high performance in April 1998 there was a 347 8.8:1 custom hydraulic roller,TFS heads, 1.7 rockers, 75mm BBK throttle body, and a vortech T-trim 16 lbs. of boost that made:
611rwhp@6000
573ft/lbs.@5500.
For it to still be making that much torque that high on a stroker is pretty impressive, this was a street motor, not a light piston and rod race piece.

fastang · 05-24-2001, 06:21 PM

I still havent heard from the guy yet about what my price is gonna be. I hope to get the intake and hood only if I can. I already have 30 lb injectors. So far Im putting this combo together in my head:

High compression 347 shortblock
AFR 58cc 185's milled a little
X303 cam - 30lb injectors
Re-using my BBK Longtubes
Roush intake or ported GT40

Do you think this will make 400 RWHP Sky?
The car red82GT posted about made over 600 hp but that was with a blower. I will have higher compression though probably 10&1/2 to 1 but no blower. I really want to hit an 11 on motor. That really says a lot.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

LX XLR8R · 05-25-2001, 12:38 PM

you will prolly want to get biger long tubes..1 3/4"-1 7/8" primaries would be ideal..1 5/8 is too small for that high flowing of a 347..you should be able to hit a 11 with ease once all the kinks are worked out

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

05-16-2001, 11:29 AM	#1
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Rousche Intake for 5.0 Does anyone remember this thing? It was supposed to be the BEST and it was only offered by Rousche for the 94-95's. They wanted a grand for it! Does anyone have or use one, or know where I can get one cheaper? I want to put the absolute BEST on my stroker. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow intake problems	shacar87	Windsor Power	9	11-14-2003 05:53 PM
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

05-16-2001, 06:01 PM	#2
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Doesnt anyone know **** about this thing?

05-16-2001, 06:50 PM	#3
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	I brlieve they decided that it was too expensive to continue production. Might as well contact Roush directly... ------------------ GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

05-18-2001, 02:36 AM	#4
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Those things were so wicked. A big part of that price was to cover the cost of the special cowl hood you needed to make the kit effective I think. It had twin rear-facing throttle bodies and was worth (almost) an honest 40hp over stock. The real b!tch was that you HAD to have a cowl hood or else the thing didn't do squat. It utilized the low pressure area that was created at the cowl. Those things even looked mean. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

05-18-2001, 02:16 PM	#5
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I work with a guy who has a friend that is sponsored by Roush. He's supposed to get me a price on one of these things. I sure hope I can afford it. I hope it got a little cheaper over time. I also heard 40 hp. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

05-21-2001, 02:10 PM	#6
Moxie Registered Member Join Date: Aug 2000 Location: Plymouth, MI Posts: 254	Roush claims 47hp, and 120hp with mildly ported GT-40 heads. Roush is now selling whatever units they have left for $600. I would like to find someone who has actually used one. ------------------ Moxie Racing The Nitrous Oxide Information Site [This message has been edited by Moxie (edited 05-21-2001).]

05-21-2001, 05:23 PM	#7
SMOKE Old School ROUSH Join Date: Nov 1999 Location: Stockbridge, GA Posts: 531	The deal sounds very good, especially if you have worked heads. Haven't heard of anyone with their intake. ------------------ K! Personalized Black 98 SVO Blown Stage II ROUSH without the side exhaust but some other cool stuff Dyno 303rwhp 338rwtrq Still working out the kinks!!!

05-21-2001, 10:53 PM	#8
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	dang a grand for an intake was it made of gold ------------------ 1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang. The "Guetto Glider" P.S. watch out cobra owners it's a freak

05-22-2001, 03:44 PM	#9
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	It was more than just the intake, it had 24lb injectors, a 70 mm mass air, a 65mm throttle body, air filter, and cowl induction hood, add all those and the kit was a pretty good deal.

05-22-2001, 07:42 PM	#10
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Thats more than a good deal, thats damn cheap if you really got all that for a grand. Thats hard to believe. But now I see why they claim the big HP increase. Jesse-skip it, You want bigger than a 70mm MAF and 65mm TB anyways, and probably 30lb injectors. I would go with the Vic JR, TFS, or holley intake. If your that worried about it, have it ported. There are plenty of good intakes on the market now. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph Mustang owners get a 15% discount! www.OJAIPCPROS.com

05-23-2001, 02:28 AM	#11
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	Actually, I think it retailed for ~$1700, hood was carbon fiber though...I've also heard that you can buy just the bare intake part for $600(if there's any left) and it will leave those other intakes far behind in terms of flow and velocity. In Ford high performance in April 1998 there was a 347 8.8:1 custom hydraulic roller,TFS heads, 1.7 rockers, 75mm BBK throttle body, and a vortech T-trim 16 lbs. of boost that made: 611rwhp@6000 573ft/lbs.@5500. For it to still be making that much torque that high on a stroker is pretty impressive, this was a street motor, not a light piston and rod race piece.

05-24-2001, 06:21 PM	#12
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I still havent heard from the guy yet about what my price is gonna be. I hope to get the intake and hood only if I can. I already have 30 lb injectors. So far Im putting this combo together in my head: High compression 347 shortblock AFR 58cc 185's milled a little X303 cam - 30lb injectors Re-using my BBK Longtubes Roush intake or ported GT40 Do you think this will make 400 RWHP Sky? The car red82GT posted about made over 600 hp but that was with a blower. I will have higher compression though probably 10&1/2 to 1 but no blower. I really want to hit an 11 on motor. That really says a lot. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

05-25-2001, 12:38 PM	#13
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	you will prolly want to get biger long tubes..1 3/4"-1 7/8" primaries would be ideal..1 5/8 is too small for that high flowing of a 347..you should be able to hit a 11 with ease once all the kinks are worked out ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch