4.6 mods

drozzee · 07-05-2001, 09:47 PM

I know there are more modifications out there for 5.0liters, but I also know that more and more are starting to be developed for 4.6, so basically i was wondering if anyone new some good engine mods or otherwise to start out with on a pretty much stock 4.6 mustang? Any help would be much appreciated!!!

------------------

SANDSGT · 07-05-2001, 11:16 PM

Hey Drozzee!

I'm in the same boat as you. Just starting to put mods on my 4.6 and I'm not exactly sure where I want to start.

Today I decided it was at least time for some "sound" and on my way home from work I stopped and had 40 Series Delta Flow FlowMasters put on.

These people in here will help us out I'm sure.

Any suggestions people???

------------------
35th Anniversary
Limited Edition
Black on Black
5-speed

97snakedriver · 07-06-2001, 12:08 AM

Yeah. Check over in the Modular Forum.

But all the sames sorts of bolt ons that people have been using on the 5.0s are now available for the 4.6s.

The first thing I would do is get a set of gears. 3.73s+ for the GTs, 4.10/4.30+ for a Cobra. Then a shifter. For bolt on power there are underdrive pulleys, timing adjusters, and intakes. For the exhaust there are several different headers available now in both shorty and long tube configuration, several H-pipes, and who knows how many cat-backs. There are about 10 different manufactures of superchargers.

Steeda carries most of this stuff: http://www.steeda.com/

BBK makes a nice set of long tube headers and some other stuff:
http://www.bbkperformance.com/

JBA makes a couple of nice (although expensive) sets of shortie headers:
http://www.jbaheaders.com/

And it goes on...

07-05-2001, 09:47 PM	#1
drozzee Registered Member Join Date: Jun 2001 Location: Florida Posts: 6	4.6 mods I know there are more modifications out there for 5.0liters, but I also know that more and more are starting to be developed for 4.6, so basically i was wondering if anyone new some good engine mods or otherwise to start out with on a pretty much stock 4.6 mustang? Any help would be much appreciated!!! ------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What mods next?	SteveAZ	Windsor Power	0	05-20-2003 09:00 PM
Brake mods ( and other first mods) for a 98 Vert	Chevyguy	Modular Madness	11	09-19-2002 10:03 AM
Future Mods	Strider	Modular Madness	6	12-19-2001 01:39 AM
Making a fast Street Car = More mods?	MrClean	Windsor Power	15	09-11-2001 04:40 PM
New Mods! - Also, how fast will I go?	2FastLX	Windsor Power	0	03-20-2001 09:06 AM

07-05-2001, 11:16 PM	#2
SANDSGT Registered Member Join Date: Jul 2001 Location: BUCKS COUNTY, PA Posts: 18	Hey Drozzee! I'm in the same boat as you. Just starting to put mods on my 4.6 and I'm not exactly sure where I want to start. Today I decided it was at least time for some "sound" and on my way home from work I stopped and had 40 Series Delta Flow FlowMasters put on. These people in here will help us out I'm sure. Any suggestions people??? ------------------ 35th Anniversary Limited Edition Black on Black 5-speed

07-06-2001, 12:08 AM	#3
97snakedriver Registered Member Join Date: May 1999 Location: Blacksburg, VA Posts: 1,526	Yeah. Check over in the Modular Forum. But all the sames sorts of bolt ons that people have been using on the 5.0s are now available for the 4.6s. The first thing I would do is get a set of gears. 3.73s+ for the GTs, 4.10/4.30+ for a Cobra. Then a shifter. For bolt on power there are underdrive pulleys, timing adjusters, and intakes. For the exhaust there are several different headers available now in both shorty and long tube configuration, several H-pipes, and who knows how many cat-backs. There are about 10 different manufactures of superchargers. Steeda carries most of this stuff: http://www.steeda.com/ BBK makes a nice set of long tube headers and some other stuff: http://www.bbkperformance.com/ JBA makes a couple of nice (although expensive) sets of shortie headers: http://www.jbaheaders.com/ And it goes on...