© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-12-2001, 12:26 PM | #1 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Price on a 87GT
My gf found a bright red 1987 GT.
It has a 5-speed tranny Stock 5.0 Motor Lowered with springs, shocks, new control arms... Has a few door dings and a crack over the rear fender..New Paint About a 5inch gash in the driver seat Power Steering Power Windows Power Locks Tilt Wheel AM/FM Cassette 130,000 miles How much longer do you guys think this car can run..I drove it and it felt strong. But I think they are asking to much..they are asking $4,500...Blue book value is only $3,830..Should I tell her to let this one go and find another one?? ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del. |
06-12-2001, 03:34 PM | #2 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
I wouldnt pay over $3500 myself.
Sky ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph 50-175 Nitrous Works WET Kit just added. |
06-12-2001, 05:58 PM | #3 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
Doesn't sound super nice to me, I wouldn't pay anywhere near 4500 for it.
|
06-12-2001, 07:05 PM | #4 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
Has a few door dings and a crack over the rear fender..New Paint
About a 5inch gash in the driver seat I would say maybe $2500 paid $1800 for mine 104000 miles 1988. |
06-13-2001, 01:30 AM | #5 |
Guest
Posts: n/a
|
Keep looking! Thats too much money to ask for a car in that condition with that many miles.
First mustang I bought was a 85 Mustang GT,carbed,5-speed. It had perfect paint,perfect grey interior, and had 80,000 miles...when I sold the car it had 85,***.I bought it for $4000,sold it for $4500 with new Mac exhaust The 87GT I have presently ..I bought for $8000 with near perfect paint,perfect grey interior,100% stock with 40,100 miles. Just tonight I saw a white 87GT with red interior for $2000 or best offer in the classifieds.The deals are out there,you just gotta keep your eyes open and tell her to take her time in deciding ------------------ Paxton Blown 87GT ICQ#91504337 |
06-13-2001, 04:03 PM | #6 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Thanks for all the replys..I told her to wait off and we would find something else..She didnt like it but it will be the best for her..
Derek ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del. |
06-14-2001, 01:56 PM | #7 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Well..my gf ended up getting that stang..she gave 3800 for it...it looks good so i'm not complaining...its lowered quite a bit too..it has brand new 245/40/16 inch kelly road hugger tires on it too..this motor wont stay stock for long..i can see a 306 in its near future..stock heads ported and polish..trick flow intake..70mm TB..I will put the cam out of my car in it and get me a new one what do u think..
------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do you price your modified stang when selling it? | Mach 1 | Blue Oval Lounge | 32 | 11-26-2002 01:28 PM |
Price on 03 Cobra | 98SteedaGT | Modular Madness | 7 | 08-15-2002 08:26 PM |
2002 GT vs 1987 GT Review LONG | Unit 5302 | Blue Oval Lounge | 11 | 06-09-2002 05:29 PM |
Gas price revolt! | The Deuce | Blue Oval Lounge | 25 | 04-17-2002 09:33 AM |
Price check in aisle 6... | Phantom5oh | Windsor Power | 5 | 10-04-2001 03:56 PM |