MustangGUYS, check this out :D

fastang · 07-27-2001, 07:09 PM

Theres a link to a 24/7 video in some cute chics house. This cam is on all the time and she doesnt mind. I think someone pays her to keep it on, or she just wants attention. If you want me to post the link, let me know. As long as its cool with the mods here. I dont want to piss anyone off. She's not naked all the time or anything so its not dirty, but from what I have heard, she is occasionaly.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

the bandit · 07-27-2001, 07:41 PM

ok, so where is the link?

------------------
14.44 best et with street tires, spinning first and second hard. only 3.73's and steeda lowering springs. more to come when i make some money

newbie440 · 07-27-2001, 09:30 PM

yeah whats the link i wanna know

95mustanggt · 07-27-2001, 11:09 PM

I'm for it, but maybe you should email it to those who are interested.

That way no one can get offended

and we can get to see the video footage!

------------------
1995 Mustang GT

84LX89GT · 07-28-2001, 12:20 AM

You can also send private messages through mustang works to those who are interested. Like me. Please send me a private message. And yes, i'm a dirty pervert

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

Skyman · 07-28-2001, 02:55 AM

If I only had DSL or Cable.

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
1.69 60'

429mustang · 07-28-2001, 05:36 AM

Whats the address?

Steve
astrohell85@hotmail.com

------------------
86 Mustang GT w/pretty stock 93 5.0 (cam,pulleys,injectors, throttlebody,h-pipe)
Motor to be swapped for a 1970 429 +.030, ported heads, solid roller cam, victor intake, 10.2:1 comp, C-6 trans, 3:73 rearend W/moser axles

jimberg · 07-28-2001, 08:58 AM

Sheesh, there's a ton of these. The first girl doing this I saw was on Letterman a few years ago. The web site is JenniCam.Com. She charges and makes a lot of money, that's why she does it.

------------------
351W 89 Mustang GT Convertible

joe4speed · 07-28-2001, 12:42 PM

Yeah, there are alot... when I first started my site about 5 years ago, It was a webcam site.. to this day I still have the cam page on it. It's pretty fun, though I don't leave it on 24/7 anymore (too many freaks!

) What's the address?

------------------
Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website:www.joe4speed.com
99 Ninja ZX-6R:10.32@135mph!
1993 Olds Eighty Eight LSS 16.40@88.8mph

fastang · 07-28-2001, 05:07 PM

Well, theres no charge for this one. I left a warning for a day and nobody told me not to post. its, http://multimidia.uol.com.br/vcocdpg

I hope it works.

[This message has been edited by fastang (edited 07-28-2001).]

joe4speed · 07-29-2001, 12:17 AM

The page cannot be displayed

69fastback · 07-29-2001, 06:13 AM

I got the same thing page cannot be displayed.

6T9PONY · 07-29-2001, 03:14 PM

You guys are all a bunch of pervs.

fastang- You gonna get that link working any time soon???

------------------
Previously "BennyBoy"
'69 Coupe with 351W
Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Hedman headers, 2 1/2" pipe, glasspacks, C4, 9" Currie is here!!, 290hp-stock heads
The Surgeon General didn't say anything about smoking your azz!!

fastang · 07-30-2001, 11:43 AM

I've tried but it wont work! Go to clubSi.coms messageboard and look under the "out there" section. Look for the post titled "Check this out" Its 7 or 8 pages long.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

07-27-2001, 07:09 PM	#1
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	MustangGUYS, check this out :D Theres a link to a 24/7 video in some cute chics house. This cam is on all the time and she doesnt mind. I think someone pays her to keep it on, or she just wants attention. If you want me to post the link, let me know. As long as its cool with the mods here. I dont want to piss anyone off. She's not naked all the time or anything so its not dirty, but from what I have heard, she is occasionaly. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carfax	mustangLX92	Blue Oval Lounge	1	04-30-2003 12:20 AM
Check Engine Light Question.	5ohCOUPE	Windsor Power	8	12-25-2002 12:20 AM
Emissions related? Check Engine Light	Coupe Devil	Windsor Power	2	05-09-2002 11:49 AM
Weird Radiator problem.... Please check this out	89FHPLX	Windsor Power	6	02-02-2002 02:20 AM
Check Engine Light	Mach.1	Modular Madness	12	03-28-2000 06:16 PM

07-27-2001, 07:41 PM	#2
the bandit Registered Member Join Date: Jun 2001 Location: WEST PALM BEACH, FL. Posts: 121	ok, so where is the link? ------------------ 14.44 best et with street tires, spinning first and second hard. only 3.73's and steeda lowering springs. more to come when i make some money

07-27-2001, 09:30 PM	#3
newbie440 Registered Member Join Date: Jun 2001 Location: Ft.Worth, Tx Posts: 9	yeah whats the link i wanna know

07-27-2001, 11:09 PM	#4
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	I'm for it, but maybe you should email it to those who are interested. That way no one can get offended and we can get to see the video footage! ------------------ 1995 Mustang GT

07-28-2001, 12:20 AM	#5
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	You can also send private messages through mustang works to those who are interested. Like me. Please send me a private message. And yes, i'm a dirty pervert ------------------ previous name: 84stangLX '84 Mustang 5.0 LX my LX '89 Mustang GT my GT

07-28-2001, 02:55 AM	#6
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	If I only had DSL or Cable. ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 1.69 60'

07-28-2001, 05:36 AM	#7
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Whats the address? Steve astrohell85@hotmail.com ------------------ 86 Mustang GT w/pretty stock 93 5.0 (cam,pulleys,injectors, throttlebody,h-pipe) Motor to be swapped for a 1970 429 +.030, ported heads, solid roller cam, victor intake, 10.2:1 comp, C-6 trans, 3:73 rearend W/moser axles

07-28-2001, 08:58 AM	#8
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	Sheesh, there's a ton of these. The first girl doing this I saw was on Letterman a few years ago. The web site is JenniCam.Com. She charges and makes a lot of money, that's why she does it. ------------------ 351W 89 Mustang GT Convertible

07-28-2001, 12:42 PM	#9
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	Yeah, there are alot... when I first started my site about 5 years ago, It was a webcam site.. to this day I still have the cam page on it. It's pretty fun, though I don't leave it on 24/7 anymore (too many freaks! ) What's the address? ------------------ Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website:www.joe4speed.com 99 Ninja ZX-6R:10.32@135mph! 1993 Olds Eighty Eight LSS 16.40@88.8mph

07-28-2001, 05:07 PM	#10
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Well, theres no charge for this one. I left a warning for a day and nobody told me not to post. its, http://multimidia.uol.com.br/vcocdpg I hope it works. [This message has been edited by fastang (edited 07-28-2001).]

07-29-2001, 12:17 AM	#11
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	The page cannot be displayed

07-29-2001, 06:13 AM	#12
69fastback IRAQ VET Join Date: Feb 2000 Location: high desert California Posts: 1,480	I got the same thing page cannot be displayed.

07-29-2001, 03:14 PM	#13
6T9PONY All about the Windsor. Join Date: Feb 2000 Posts: 2,052	You guys are all a bunch of pervs. fastang- You gonna get that link working any time soon??? ------------------ Previously "BennyBoy" '69 Coupe with 351W Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Hedman headers, 2 1/2" pipe, glasspacks, C4, 9" Currie is here!!, 290hp-stock heads The Surgeon General didn't say anything about smoking your azz!!

07-30-2001, 11:43 AM	#14
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I've tried but it wont work! Go to clubSi.coms messageboard and look under the "out there" section. Look for the post titled "Check this out" Its 7 or 8 pages long. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors