Corner light rubber piece fixing/gluing...

[jetuomi]

OK, I bought some "euro clear corners" from Ebay for my car, and they're not bad, but for the price ($25) they are already falling apart.

That black rubber "weather stripping" is losing its hold to the plastic, and I was wondering what would be a good glue to put this back on.. Also, I just might rip it off all together and redo it with some better fitting stuff. What kind of rubber would do the trick of filling in the gaps, and that would also look good?

I guess what I'm asking is, is there anything at Canadian Tire that would do the trick? (its our all-purpose store up here in Canada!)

Thanks!!

[Five0]

I just bought the whole headlight kit and the inside marker light is coming apart; The plastic seperated where it is glued together.

I will have to call and see if I can get them to send me another peice.

You should be able to find some glue for plastic that should work. Check your local auto parts store.

[tireburner163]

I don't know about on the 94 and up cars, but I made mine by using a razor blade to cut off the plastic lens on the stock corner lenses, I broke out the amber lens, and used silicone to seal it back up. So far 2 months and everything is holding together fine.

Here's a pic

[Five0]

I had heard about diong that but I needed all new headlights and the clears were anly 10 more dollars.

[smithbling]

Jani my Boy!

Go to CTC and get this stuff called JB weld (2 parts) mix the hardener in and apply. This **** will NEVER come off!!!