© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-05-2001, 08:08 AM | #1 |
Registered Member
Join Date: Dec 2000
Location: Mendota
Posts: 96
|
What Should my car run?
I have a 90 LX 5.0 w/ 3:55, MSD Ing.&wires, Mac Shorty headers,Hedderman Offroad H-pipe,flowmaster 2 chamber mufflers, BBK Cold Air Induction, and the stock t.b. bored to a 65mm. Just want to know what it is cabable of.
|
02-05-2001, 10:26 AM | #2 |
Registered Member
Join Date: Oct 1999
Location: Cincinnati, Ohio
Posts: 1,575
|
high 13's on street tires and maybe mid 13's on slicks.
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html |
02-05-2001, 11:50 AM | #3 |
Registered Member
Join Date: Dec 2000
Location: Mendota
Posts: 96
|
Would it make a difference if I removed the front sway bar.
|
02-05-2001, 01:49 PM | #4 |
Registered Member
Join Date: Sep 2000
Location: Conn.
Posts: 220
|
I have simular mod's on my 87 LX and it has run in the 13.80's with probably another tenth or two still left. Traction is the key - I picked up almost 4 tenths by bolting on a set of drag radials
------------------ 1965 K code coupe - numbers matching - restoration ongoing. 1987 LX notch, stock heads and intake, 3.55's and typical bolt on's 13.89@100.25 |
|
|