What Should my car run?

slowride90 · 02-05-2001, 08:08 AM

I have a 90 LX 5.0 w/ 3:55, MSD Ing.&wires, Mac Shorty headers,Hedderman Offroad H-pipe,flowmaster 2 chamber mufflers, BBK Cold Air Induction, and the stock t.b. bored to a 65mm. Just want to know what it is cabable of.

93CobraR · 02-05-2001, 10:26 AM

high 13's on street tires and maybe mid 13's on slicks.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

slowride90 · 02-05-2001, 11:50 AM

Would it make a difference if I removed the front sway bar.

Jaydee · 02-05-2001, 01:49 PM

I have simular mod's on my 87 LX and it has run in the 13.80's with probably another tenth or two still left. Traction is the key - I picked up almost 4 tenths by bolting on a set of drag radials

------------------
1965 K code coupe - numbers matching - restoration ongoing. 1987 LX notch, stock heads and intake, 3.55's and typical bolt on's 13.89@100.25

02-05-2001, 08:08 AM	#1
slowride90 Registered Member Join Date: Dec 2000 Location: Mendota Posts: 96	What Should my car run? I have a 90 LX 5.0 w/ 3:55, MSD Ing.&wires, Mac Shorty headers,Hedderman Offroad H-pipe,flowmaster 2 chamber mufflers, BBK Cold Air Induction, and the stock t.b. bored to a 65mm. Just want to know what it is cabable of.

02-05-2001, 10:26 AM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	high 13's on street tires and maybe mid 13's on slicks. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

02-05-2001, 11:50 AM	#3
slowride90 Registered Member Join Date: Dec 2000 Location: Mendota Posts: 96	Would it make a difference if I removed the front sway bar.

02-05-2001, 01:49 PM	#4
Jaydee Registered Member Join Date: Sep 2000 Location: Conn. Posts: 220	I have simular mod's on my 87 LX and it has run in the 13.80's with probably another tenth or two still left. Traction is the key - I picked up almost 4 tenths by bolting on a set of drag radials ------------------ 1965 K code coupe - numbers matching - restoration ongoing. 1987 LX notch, stock heads and intake, 3.55's and typical bolt on's 13.89@100.25