Dyno Sheet

bri32zz · 11-20-2002, 12:08 AM

Was able to scan my dyno sheet finally here it is

tireburner163 · 11-20-2002, 12:13 AM

Only 621hp

pshhhhh......a LS-1 makes that stock

bri32zz · 11-20-2002, 12:14 AM

Maybe I should switch to the dark side then

Crazy Horse GT · 11-20-2002, 12:38 AM

trade my 270 hp for it, lol.

bri32zz · 11-20-2002, 12:40 AM

Ok Marty it is a deal

Just give me 5 grand and your car Ok

6T9PONY · 11-20-2002, 12:44 AM

621 rwhp? I dunno man....that's really good, but I think it should be better than that. I have a VTEC Civic with a intake and exhaust and body kit/wing plus a Neuspeed sticker kit and I was putting down close to that. I added some neons and altezzas since then, so we should be pretty even.....wanna race sometime?

Nice numbers Brian, VERY IMPRESSIVE!

bri32zz · 11-20-2002, 12:47 AM

I was thinking about putting a type-r sticker on the hood to add another 100 hp and maybe a 5" fart can for that extra 50 hp---is that a good idea?

6T9PONY · 11-20-2002, 12:51 AM

Quote:

Originally posted by bri32zz
I was thinking about putting a type-r sticker on the hood to add another 100 hp and maybe a 5" fart can for that extra 50 hp---is that a good idea?

Yeah that would help you out a lot.....if you did those and put some altezzas on there you could probably beat me...but right now, I think I might take you....

bri32zz · 11-20-2002, 12:54 AM

fiveohpatrol · 11-20-2002, 01:02 AM

nice numbers, but what is the drop a little after 5000rpm? The staggered graph also makes it look like there was alot of tire slippage between 5500-7000, so you may have even more than that.

oh and by the way, you are going to need TWO of those fartcans remember?

Crazy Horse GT · 11-20-2002, 01:09 AM

Quote:

Originally posted by bri32zz
Ok Marty it is a deal Just give me 5 grand and your car Ok

5k, my payment book, it's a deal.

bri32zz · 11-20-2002, 01:09 AM

I believe the drop is when the nitrous kicked in. Just on motor I have around 500 hp. And yes my belt was slipping and tires were spinning a lot too during the runs and it was running a bit rich. I have more dyno sheets with the air to fuel ratio just have to find them. I still have a lot more tunning to be done on the new engine. The never engaged the nitrous until the end of the pull. I have no idea about these dyno readings just the end results. Maybe Eric4nitrous has some more answers on the graph he is into nitrous built engines. With the new engine my redline goes up to 7 grand now I guess it is the stroker motor I have no real Idea.

Crazy Horse GT · 11-20-2002, 01:11 AM

we got a deal right? lmao.

bri32zz · 11-20-2002, 01:13 AM

No you must pay it off first my friend

Crazy Horse GT · 11-20-2002, 01:46 AM

lol, come on man, i got the 5 year warranty, plus i'll throw in the x & mil's lol.

Ackbar00 · 11-20-2002, 08:59 AM

I will trade my SHO for it, but I need about 500$ to go with it.

Dark_5.0 · 11-20-2002, 09:37 AM

Awesome results, obviously alot of hard work, time and effort is paying off.

Congrats,

1969Mach1 · 11-20-2002, 10:31 AM

Those are sweeeet numbers.

I'll race you aswell.

And when I have my *** handed to me, I'll just blame it on you running the juice.

hehehe Get that baby all tuned up and I want to see some new numbers.

Sam.

lx mike · 11-20-2002, 03:18 PM

Quote:

Originally posted by bri32zz
I was thinking about putting a type-r sticker on the hood to add another 100 hp and maybe a 5" fart can for that extra 50 hp---is that a good idea?

Remember your coming to S.W FLA. The only thing i better see in or on the car is you!!

11-20-2002, 12:13 AM	#2
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Only 621hp pshhhhh......a LS-1 makes that stock __________________ 1987 Buick T-type 1998 HD Electra Elide

11-20-2002, 12:14 AM	#3
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	Maybe I should switch to the dark side then __________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 12:38 AM	#4
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	trade my 270 hp for it, lol. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

11-20-2002, 12:40 AM	#5
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	Ok Marty it is a deal Just give me 5 grand and your car Ok __________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 12:47 AM	#7
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	I was thinking about putting a type-r sticker on the hood to add another 100 hp and maybe a 5" fart can for that extra 50 hp---is that a good idea? __________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 12:44 AM	#6
6T9PONY All about the Windsor. Join Date: Feb 2000 Posts: 2,052	621 rwhp? I dunno man....that's really good, but I think it should be better than that. I have a VTEC Civic with a intake and exhaust and body kit/wing plus a Neuspeed sticker kit and I was putting down close to that. I added some neons and altezzas since then, so we should be pretty even.....wanna race sometime? Nice numbers Brian, VERY IMPRESSIVE!

11-20-2002, 12:54 AM	#9
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	__________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 01:02 AM	#10
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	nice numbers, but what is the drop a little after 5000rpm? The staggered graph also makes it look like there was alot of tire slippage between 5500-7000, so you may have even more than that. oh and by the way, you are going to need TWO of those fartcans remember? __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

11-20-2002, 01:09 AM	#12
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	I believe the drop is when the nitrous kicked in. Just on motor I have around 500 hp. And yes my belt was slipping and tires were spinning a lot too during the runs and it was running a bit rich. I have more dyno sheets with the air to fuel ratio just have to find them. I still have a lot more tunning to be done on the new engine. The never engaged the nitrous until the end of the pull. I have no idea about these dyno readings just the end results. Maybe Eric4nitrous has some more answers on the graph he is into nitrous built engines. With the new engine my redline goes up to 7 grand now I guess it is the stroker motor I have no real Idea. __________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 01:11 AM	#13
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	we got a deal right? lmao. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

11-20-2002, 01:13 AM	#14
bri32zz Registered Member Join Date: Aug 2002 Location: Canton GA Posts: 216	No you must pay it off first my friend __________________ My CAR IS GONE R.I.P----I miss YOU 331ci, 69 Windsor heads ported and shaved , Trick Flow-Intake ported,JE blower pistons, Custom cam 542 lift, 1.73 rrs, Equal length headers, BBK Hi-Flow cats, Hurst shifter, 3:73 gears, Tremec 3550 tranny,Lakewood drag suspension-90/10 in front and 50/50 in the back. Lakewood traction bars. Edelbrock 70mm tb, K&N filter, Kirban fuel reguator, Custom sub-Frame connectors,83 lb squirters, powerdyne blower with 12psi pulley, http://www.pumpoperators.com/brian/ Rice Haters Club Member #82 My wife is AWSOME!!!!!!!!

11-20-2002, 01:46 AM	#15
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	lol, come on man, i got the 5 year warranty, plus i'll throw in the x & mil's lol. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

11-20-2002, 08:59 AM	#16
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	I will trade my SHO for it, but I need about 500$ to go with it. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

11-20-2002, 09:37 AM	#17
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Awesome results, obviously alot of hard work, time and effort is paying off. Congrats, __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

11-20-2002, 10:31 AM	#18
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	Those are sweeeet numbers. I'll race you aswell. And when I have my * handed to me, I'll just blame it on you running the juice. hehehe Get that baby all tuned up and I want to see some new numbers. Sam. __________________ 1969 Mustang Mach 1**Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Darius' dyno numbers	drudis	Power Adders	7	08-27-2004 04:09 PM
Stingy Dyno?	SleeperGT	Modular Madness	4	10-22-2003 01:42 PM
Dyno Sheet!	Snakeman	Modular Madness	4	12-03-2002 01:32 PM
I have the DYNO Sheet!!!!!!	Stang Runner	Windsor Power	8	05-14-2002 09:37 PM