99 V6 supercharged?

OGC_99_Rider · 03-04-2001, 04:45 PM

Heres the deal I have a 99 V6 stang and I have searched all over the place lookin for a company that has a turbo or preferably a supercharger kit for them I have looked through users rides and no one has a supercharged V6. So if anyone anyone at all knows a company that makes a supercharger kit for a 99 V6 I am dying to know who it is.

lx mike · 03-04-2001, 06:09 PM

I know vortech make one for the pre 99's v-6 mustangs, maybe also the 99 and up too, try there web site or over at http://www.v6power.com they can help you out with any questions about your car and parts.

Rev · 03-04-2001, 07:03 PM

Unless you're really stuck on 6'es, why not trade and get a 4.6? Lot's of options then. Not a "V-6" flame, just common sense.

Rev

------------------
'66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph
1/4 mi.

OGC_99_Rider · 03-04-2001, 09:16 PM

Rev if I had the money I would but since I didnt at the time I bought it and dont know its a little bit of a predicament. Besides its cheaper to do it this way anyways roughly the same power its lighter and probably cheaper

bigwhitecobra · 03-04-2001, 09:55 PM

This is only my opinion, but first and formost, I would upgrade my brakes and suspension. Then I would go with a Blower. But since we are talking about you, and your car, I'd start off by calling Kenny Belle or Vortech. Each of those companies make a kit for your beloved V6. Hey REV, give him a break, V6's need love too!

------------------
The Black Mamba 11.2@124
94 Cobra- MAC cold air fender kit, Motorsport underdrive pulley's, MAC 21/2" off-road H pipe, SVO mufflers, 3.73 gears, E-303 cam, 13.417@101.335mph

OGC_99_Rider · 03-04-2001, 10:01 PM

Big white thank you first and formost you damn right I dont know about my brakes but the ride quality in that thing is absolute shite so springs is deffinately on my to do list But Ive tried reaching Vortech countless times and they never respond and as for as I know correct me if Im wrong but they dont make a 99 blower kit for a V6. As for kenny belle do they have a web site or somthin that i can look into?

------------------
"I may not have ended up where I intended to go, But I think I ended up where I was intended to go"
Douglas Adams

bigwhitecobra · 03-05-2001, 12:20 AM

I am not sure where to look on the web, but I know that the new Roush V6's have an option for a Vortech with a 6 or 9 # system. Probably an A-trim. Kenny Belle makes a Possitive Displacement system, which is really fun for around town fun!! But it is only a 6# system, good for roughly 75-100 hp.(very overrated)Check them out at www.kennybelle.com
I have heard of people using an S-trim, but not sure of the validity. Look for them at www.vortechengineering.com .
Not sure if that is the right address or not. Just do a search on google or something. Good luck!

------------------
The Black Mamba 11.2@124
94 Cobra- MAC cold air fender kit, Motorsport underdrive pulley's, MAC 21/2" off-road H pipe, SVO mufflers, 3.73 gears, E-303 cam, 13.417@101.335mph

1989GT · 03-05-2001, 08:33 AM

Check out www.supersixmotorsports.com they've done a lot of testing and they offer kits(ported heads, intake, cam and blower). They're still working on the 99's but they maybe able to answer questions. On the older 3.8 they got 305 ponies to the ground. Not too bad. And it started with around 150 and the crank. Think what they can do with the new 3.8.

------------------
89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on!
Throttle Junkie Powered by Ford!
12.824 @ 107.05 MPH
PVT Blankenship leaving for BCT 14MAR01
MOS 67 Romeo

OGC_99_Rider · 03-05-2001, 10:00 AM

Thx guys

------------------
"I may not have ended up where I intended to go, But I think I ended up where I was intended to be"
Douglas Adams

Skyman · 03-06-2001, 07:30 PM

There are about 3-4 guys maybe more on Corral.net with supercharged 6's. Check out the v6 power area there. But definatly call vortech. They are the best. Call em on the phone, thats the only way to get ahold of them.

Sky

------------------
-1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's.
0-110MPH In car view (963k)
All Throttle through 3 gears! (497k)
<A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

Unit 5302 · 03-06-2001, 08:30 PM

Hmmmm... How much down time can your V-6 have?

What about trying to find an Thunderbird SC engine? They have an Eaton roots positive displacement blower on a 3.8L V-6 stock. The SC has is a much beefier assembly, maybe if you could find a lower mileage one you could drop it in there? They make 240hp and 300something lb/ft of torque.

That should be good enough for mid 13's.

Or you could probably just yank the SC off it and go to town. They should be relatively interchangable? Anyone try that? I think they make eigher 6 or 8psi. That outta get your V-6 into the 260-280hp area.

Rev · 03-06-2001, 08:45 PM

OGC, I wasn't trying to be critical. Actually, I was thinking that trading for a 4.6 was the most cost effective way of getting more power. I can sympathize on the money thing too. Good luck what ever you do.

Rev

------------------
'66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph
1/4 mi.

OGC_99_Rider · 03-06-2001, 09:37 PM

Yeah yo sorry rev didnt mean anythin by it man its all good just sayin I dont have the cash not just the money to pay for the new ride but also the insurance money itll cost at least a 1000 dollars more

03-04-2001, 04:45 PM	#1
OGC_99_Rider Registered Member Join Date: Mar 2001 Location: Aurora, Ontario, Canada Posts: 9	99 V6 supercharged? Heres the deal I have a 99 V6 stang and I have searched all over the place lookin for a company that has a turbo or preferably a supercharger kit for them I have looked through users rides and no one has a supercharged V6. So if anyone anyone at all knows a company that makes a supercharger kit for a 99 V6 I am dying to know who it is.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do you think SVT will strike gold with the new supercharged, 390HP 2003 Mustang Cobra	StangFlyer	Blue Oval Lounge	86	04-08-2004 03:33 PM
What type of ET's would a 351W supercharged do?	ImportKiller	Stang Stories	3	10-08-2002 10:22 PM
Racing a SuperCharged Trans Am this weekend!!!	CobraConv99	Stang Stories	20	12-01-2001 05:58 PM
SUPERCHARGED GUYS:How did you remove A/C??	Mustanguy	Windsor Power	2	03-30-2001 02:24 AM
93 kb supercharged gt -what should i do x or h???	bad93gt	Windsor Power	5	03-02-2001 06:36 PM

03-04-2001, 06:09 PM	#2
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	I know vortech make one for the pre 99's v-6 mustangs, maybe also the 99 and up too, try there web site or over at http://www.v6power.com they can help you out with any questions about your car and parts.

03-04-2001, 07:03 PM	#3
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Unless you're really stuck on 6'es, why not trade and get a 4.6? Lot's of options then. Not a "V-6" flame, just common sense. Rev ------------------ '66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph 1/4 mi.

03-04-2001, 09:16 PM	#4
OGC_99_Rider Registered Member Join Date: Mar 2001 Location: Aurora, Ontario, Canada Posts: 9	Rev if I had the money I would but since I didnt at the time I bought it and dont know its a little bit of a predicament. Besides its cheaper to do it this way anyways roughly the same power its lighter and probably cheaper

03-04-2001, 09:55 PM	#5
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	This is only my opinion, but first and formost, I would upgrade my brakes and suspension. Then I would go with a Blower. But since we are talking about you, and your car, I'd start off by calling Kenny Belle or Vortech. Each of those companies make a kit for your beloved V6. Hey REV, give him a break, V6's need love too! ------------------ The Black Mamba 11.2@124 94 Cobra- MAC cold air fender kit, Motorsport underdrive pulley's, MAC 21/2" off-road H pipe, SVO mufflers, 3.73 gears, E-303 cam, 13.417@101.335mph

03-04-2001, 10:01 PM	#6
OGC_99_Rider Registered Member Join Date: Mar 2001 Location: Aurora, Ontario, Canada Posts: 9	Big white thank you first and formost you damn right I dont know about my brakes but the ride quality in that thing is absolute shite so springs is deffinately on my to do list But Ive tried reaching Vortech countless times and they never respond and as for as I know correct me if Im wrong but they dont make a 99 blower kit for a V6. As for kenny belle do they have a web site or somthin that i can look into? ------------------ "I may not have ended up where I intended to go, But I think I ended up where I was intended to go" Douglas Adams

03-05-2001, 12:20 AM	#7
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	I am not sure where to look on the web, but I know that the new Roush V6's have an option for a Vortech with a 6 or 9 # system. Probably an A-trim. Kenny Belle makes a Possitive Displacement system, which is really fun for around town fun!! But it is only a 6# system, good for roughly 75-100 hp.(very overrated)Check them out at www.kennybelle.com I have heard of people using an S-trim, but not sure of the validity. Look for them at www.vortechengineering.com . Not sure if that is the right address or not. Just do a search on google or something. Good luck! ------------------ The Black Mamba 11.2@124 94 Cobra- MAC cold air fender kit, Motorsport underdrive pulley's, MAC 21/2" off-road H pipe, SVO mufflers, 3.73 gears, E-303 cam, 13.417@101.335mph

03-05-2001, 08:33 AM	#8
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Check out www.supersixmotorsports.com they've done a lot of testing and they offer kits(ported heads, intake, cam and blower). They're still working on the 99's but they maybe able to answer questions. On the older 3.8 they got 305 ponies to the ground. Not too bad. And it started with around 150 and the crank. Think what they can do with the new 3.8. ------------------ 89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on! Throttle Junkie Powered by Ford! 12.824 @ 107.05 MPH PVT Blankenship leaving for BCT 14MAR01 MOS 67 Romeo

03-05-2001, 10:00 AM	#9
OGC_99_Rider Registered Member Join Date: Mar 2001 Location: Aurora, Ontario, Canada Posts: 9	Thx guys ------------------ "I may not have ended up where I intended to go, But I think I ended up where I was intended to be" Douglas Adams

03-06-2001, 07:30 PM	#10
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	There are about 3-4 guys maybe more on Corral.net with supercharged 6's. Check out the v6 power area there. But definatly call vortech. They are the best. Call em on the phone, thats the only way to get ahold of them. Sky ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's. 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) <A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

03-06-2001, 08:30 PM	#11
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Hmmmm... How much down time can your V-6 have? What about trying to find an Thunderbird SC engine? They have an Eaton roots positive displacement blower on a 3.8L V-6 stock. The SC has is a much beefier assembly, maybe if you could find a lower mileage one you could drop it in there? They make 240hp and 300something lb/ft of torque. That should be good enough for mid 13's. Or you could probably just yank the SC off it and go to town. They should be relatively interchangable? Anyone try that? I think they make eigher 6 or 8psi. That outta get your V-6 into the 260-280hp area.

03-06-2001, 08:45 PM	#12
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	OGC, I wasn't trying to be critical. Actually, I was thinking that trading for a 4.6 was the most cost effective way of getting more power. I can sympathize on the money thing too. Good luck what ever you do. Rev ------------------ '66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph 1/4 mi.

03-06-2001, 09:37 PM	#13
OGC_99_Rider Registered Member Join Date: Mar 2001 Location: Aurora, Ontario, Canada Posts: 9	Yeah yo sorry rev didnt mean anythin by it man its all good just sayin I dont have the cash not just the money to pay for the new ride but also the insurance money itll cost at least a 1000 dollars more