My introduction

Image · 12-04-2002, 03:58 AM

Great site!!!!

Im new and learning, just wanted to make and introduction.

Look forward to meeting all, and looking fo ideas!
Im so into graphix and running out of room. I started this mustang in the early spring and am moving along quite nicely.

I havent goten into mods yet but as an image the car turns alot of heads. and rings alot of ears.

well i guess ill give you a look and see what you think. all replys are appreciated, good or bad!

Image · 12-04-2002, 04:04 AM

The attached pictuers were taken with a low budget camera I hope to get more detailed shots in the future.

Image · 12-04-2002, 04:05 AM

I cut all designs and lettering by hand. I ordered the vynal rolls through auto effx of charleston wv.

Image · 12-04-2002, 04:07 AM

I cut several 8x10 sheets of vynal and printed reversed letter with my computer, then traced with a tracing table and exacto.

Image · 12-04-2002, 04:07 AM

all the graphix I precut useing straght edges and an imagination.

Image · 12-04-2002, 04:09 AM

all interior I cleaned and made ecxellent preperation for vinal coat paints, and a pasche airbrush.

Image · 12-04-2002, 04:11 AM

Ive been extremley inspiered by my freinds of Wes Tech inc, of south Charleston Wv, when it comes to sound quality and image they could teach the best.

I designed my rear window around them.

Image · 12-04-2002, 04:12 AM

And the front windshield dedicated to this great site and community.

Image · 12-04-2002, 04:15 AM

The mirrors are from MUTH signal mirros, they were ordered online out of arizona, ill try and remeber the site.

the rims are done in vynal temperarily, soon will be prepared and painted when the time and permiting weather are available.

I redo the rims about 2 times a month on average.

Again id love to have your opinions on my work and some links to other cool ideas ive missed in the user rides.

Image · 12-04-2002, 04:23 AM

My audio hardware is consisting all alpine :
headunit, CD changer,equalizer, and AI unit, (Fiber optix, not RCA

)

Pheonix gold amps, 2x 900 subs
Sony amps 3x 900 mids and highs

Subs are 12in MA

Full 6point surround consisting of all Orion:
4x 5.25(Front) 4x6(Rear) 2x4(Center F & R)
and tweets front and back

All powered by tsunami power pumpers,caps, circut breakers, wireing and all other hardware.

Skyman · 12-04-2002, 04:34 AM

Looks like youve done a lot of work on it. Its cool, quite unique. Is it a v6? I have to say you need to loose those rims.

Skyler

PKRWUD · 12-04-2002, 06:24 AM

I'd definitely say it's pretty graphic! It's a little flashy for my tastes, but it's obvious that you have put alot of time and energy into it!

Take care,
~Chris

Dark_5.0 · 12-04-2002, 01:46 PM

I think you are joking but i will play along. Yes lots of work went into it. In the form of spray paint and stickers.

Nice,

Kamaro Killer · 12-04-2002, 02:02 PM

You have a nice car, like Chris said, it's a little flashy for my tastes, but it looks nice. Have you done anything under the hood or to the suspension? How long have you had the MW banner on the front, just out of curiousity? Take care, Keith

The Deuce · 12-04-2002, 02:38 PM

I'm with Dark. There is something fishy here. Been registered since Monday, and already with the windshield banner? Hmm.....

I don't know what it is, but it smells of you know who trying to set up a "You are all hypocrites" thread. I'm calling it out, what's the IP of the newbie CPU? Match anyone elses?

Rice Hunter · 12-04-2002, 04:18 PM

Honestly.. well, I'm more conservative. I would never put that on my car. If you like it, you like it. Same way with the Civics and Preludes, etc. If you're proud of it, stay proud of it! I would rather spend my money on engine...but that's just me.

Your designs are very unusual, how did you come up with something like that?

foxbodied · 12-04-2002, 05:14 PM

Im with Duece ,somethings up

MidNiteBlu 5.0 · 12-04-2002, 05:19 PM

IMO its kinda ricy. If you did all the design and produced all the stripes and stuff thats pretty sweet. I dont care for it but hey its your car not mine

srv1 · 12-04-2002, 08:21 PM

welcome aboard! you need to make a sig.

Image · 12-04-2002, 08:52 PM

I found Mustang works early in the spring, i loved the site, and registered under "Jason N Vandy"

After Long extensive work on the car and the biusiness of my life I never had the chance to show up at the forums.

I never made any threads or replies and my account was disabled, ive been trying to reach someone who could fix the problem for about 2 weeks(when i got this camera)

Then i got impatient and created a new user name.

.................................................. .................................................. ...

As for the rims! when the funds are avalible your right ill have'em

Ive got to pay off my new furniture first, so im looking forward to having the rims in late summer!

.................................................. .................................................. .

No mods under the hood or suspension, but i gave the engine a nice little dress up job heres a peek

I hope this clears up all the ?'s

oh and its a v-6

12-04-2002, 04:34 AM	#11
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Looks like youve done a lot of work on it. Its cool, quite unique. Is it a v6? I have to say you need to loose those rims. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

12-04-2002, 06:24 AM	#12
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I'd definitely say it's pretty graphic! It's a little flashy for my tastes, but it's obvious that you have put alot of time and energy into it! Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-04-2002, 01:46 PM	#13
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I think you are joking but i will play along. Yes lots of work went into it. In the form of spray paint and stickers. Nice, __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

12-04-2002, 02:02 PM	#14
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	Welcome! You have a nice car, like Chris said, it's a little flashy for my tastes, but it looks nice. Have you done anything under the hood or to the suspension? How long have you had the MW banner on the front, just out of curiousity? Take care, Keith __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

12-04-2002, 02:38 PM	#15
The Deuce Registered Member Join Date: Apr 2002 Location: Atlanta, GA Posts: 2,325	I'm with Dark. There is something fishy here. Been registered since Monday, and already with the windshield banner? Hmm..... I don't know what it is, but it smells of you know who trying to set up a "You are all hypocrites" thread. I'm calling it out, what's the IP of the newbie CPU? Match anyone elses? __________________ 1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13

12-04-2002, 04:18 PM	#16
Rice Hunter Registered Member Join Date: Apr 2002 Location: The special place in your heart Posts: 388	Honestly.. well, I'm more conservative. I would never put that on my car. If you like it, you like it. Same way with the Civics and Preludes, etc. If you're proud of it, stay proud of it! I would rather spend my money on engine...but that's just me. Your designs are very unusual, how did you come up with something like that? __________________ Scott 453.9rwhp 387trq Lots of fun Convertible Penn State University Temple University School of Medicine (start August 27th )

12-04-2002, 05:14 PM	#17
foxbodied Registered Member Join Date: Jul 2002 Location: Port Washington,New York Posts: 104	Im with Duece ,somethings up

12-04-2002, 05:19 PM	#18
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	IMO its kinda ricy. If you did all the design and produced all the stripes and stuff thats pretty sweet. I dont care for it but hey its your car not mine __________________ 91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com

12-04-2002, 08:21 PM	#19
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	welcome aboard! you need to make a sig. __________________ Cobra brakes are on! Finally..... ------------------------------------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Introduction to MacT & some questions	MacT	Blue Oval Lounge	9	09-15-2004 09:21 PM
a late introduction of me! [long, but good]	thdrcat	Blue Oval Lounge	9	12-16-2002 05:04 PM
introduction of 5.0 project car in the best magazine on the rack:	this is not cbring	Blue Oval Lounge	0	11-12-2002 09:26 PM
An introduction of...myself!	Snakebite427	Blue Oval Lounge	7	08-27-2001 01:16 PM