Which is your favorite general auto parts store?

Fox Body · 07-11-2002, 09:39 PM

Recently, I've had to go to these frequently for some reason and the Autozone and Advanced Auto Parts in my area has really been pissing me off. When I go to an auto parts store looking for nuts and bolts, I expect them to have a good selection. I don't even screw with Discount Auto. Everytime I go there, it seems like no one's running the store, I could steal some oil and they'd never know. I have NEVER had ANY bad experience with PepBoys where I live. IF the other auto parts places don't have what I need, I know I can count on PepBoys. THe personnel there are friendly and knowledgeable and there are always enough people around to help out a customer. THe other places I go you always have to wait for at 5-10 minutes couse eveybody (which is about 3 people) is helping other customers. Sucks. Many of these guys can only read what's on the computer.

I was talking about this with a friend of mine and it was almost opposite. He has had nothing but bad experience with PepBoys (couldn't be in Augusta though, maybe South Carolina). He likes Advanced Auto Parts.

NAPA is pretty good IMO, also. THey are an old-school parts place that seems to have very knowledgeable staff there. MOst of the time it just depends on who works there. FOr me though in my experience in Augusta, GA, it seems like AA, AZ, and Discount, are just superficial parts places. THey jsut subscribe to what is popular. PepBOys and NAPA to me are the real parts places.

YOu may have totally diff experiences......

07-11-2002, 09:53 PM

we got a really cool place here in the lower mainland in BC called Mopac they are usually a great place to deal with.

PKRWUD · 07-11-2002, 10:20 PM

NAPA, hands down.

Take care,
-Chris

mustangII460 · 07-11-2002, 11:56 PM

Napa, you get what you pay for.

O wait, somthing to add to that.

Even though you may buy a brand name part from Autozome or Abvanced Auto or where ever, your not getting the best part from that name brand.

Example: Dealerships get the best of a particular run of the part. A Motorcraft plug will be better if bought from the Ford dealer. Other venders sell the "B" run of the parts etc. etc.

I have a friend that is a major supplier of parts in my area. And he broke this wonderful news to me.

joe4speed · 07-12-2002, 01:00 AM

I used to go to Napa alot, but the one around here doesnt have much in stock, so you have to order everything, so now I go to Discount Auto Parts, they tend to have everything.

Rev · 07-12-2002, 06:22 PM

For just general stuff (oil, filters, plugs, etc.) , I'll go to AutoZone because it's close to my house. For specific '66 Mustang parts I'll go to John's Mustang here in Houston. For suspension parts, I like Mustang Plus in CA. For performance parts, I just mail order them from Summit. I think that about covers my purchases.

Rev

Mr 5 0 · 07-12-2002, 06:50 PM

I prefer NAPA - but for routine items that have a brand name, Pep Boys and Auto Zone are usually a bit cheaper. Depends on the item you want.

I buy my Mobil oil, Motorcraft filters and Autolite plugs at Wal-Mart, my plug wires and some other parts at Pep Boys and the real parts at NAPA.

I also use Mustangs Unlimited for certain Mustang-specific parts.

Shop where they have what you need and at the best price. That may be NAPA, Pep Boys or some other place but I don't play favorites.

Mustangbelle306 · 07-12-2002, 08:01 PM

Fox Body: If you want courteous service, don't EVER EVER EVER come to the Pep Beeyatchz in Pleasantville, NJ

Actually, when I went to go pick up my paycheck today (remember I quit 2 weeks ago) I found out that the asst manager walked out, along with 1 parts guy and 2 cashiers...guess it wasn't just me!

Rev · 07-12-2002, 08:41 PM

I think they want folks with a 70 IQ and a scanner in many of these places.

I get a kick out of the facial expressions when I say it's for a '66 Mustang with a 289 block, 302 crank, TFTW heads, Edelbrock Performer, 625 Road Demon, 9.5/1 compression, Tri-Y headers, etc, etc.

Please just sell me the plugs that I asked for to begin with.

Rev

nickj8685 · 07-12-2002, 09:26 PM

I prefer Oreilly. I went to Autozone one time to get a headlight for a car I used to drive (79 Fairmont), this kid was working the counter and he asked me what I needed. I told him I needed the low beam light for a 79 Fairmont. He gets on his computer, looks it up and brings me a big round headlight. I told him he had the wrong head light. He told me that this was what his computer called for. I pointed out the window to the car and said "do you see that car? That's my Fairmont." He said "no that's a Thunderbird".
I have found that most people who work at Autozone are idiots.

PKRWUD · 07-12-2002, 10:27 PM

Quote:

Originally posted by nickj8685
I prefer Oreilly.

Hell yeah, orally is great, but I can't say I prefer it. Just depends on who you're with.

Take care,
-Chris

82 GT · 07-12-2002, 10:37 PM

I don't know if most people ever heard of this chain store but I like A&A auto parts. I think it's only in the Pa. area.

Foxbody, when did you get back? Good to hear from you again!!

1BAD302 · 07-12-2002, 11:25 PM

Quote:

Originally posted by digital3.3
we got a really cool place here in the lower mainland in BC called Mopac they are usually a great place to deal with.

Mopac is great, way better than Lordco and their prices are always better. Plus they do installs on site. I find that the Lordco guys are always a bit slow...."do you guys carry 3.73's for a 95 5.0?" and you get "huh!?, what are those, let me look in my special book"

polara7777 · 07-13-2002, 09:33 AM

My choices here a re pretty slim. Autozone, Napa, Advanced, and a couple small stores. I prefer Advanced because the people there are great and they carry a decent line of Hi-Po parts in stock. And in most cases can get what they don't have overnighted. Napa is alright but as someone said they have to order EVERYTHING!. 'Yeah I need a set of champions for a 67 Dodge but with a 18 heat index.' 'Sure! We can have them here in 2 days!' Screw that. We also have a decent Hi-Po shop in town. He has to order most everything but can get anything you ever wanted for anything.

07-13-2002, 12:30 PM

Quote:

Originally posted by 1BAD302

Mopac is great, way better than Lordco and their prices are always better. Plus they do installs on site. I find that the Lordco guys are always a bit slow...."do you guys carry 3.73's for a 95 5.0?" and you get "huh!?, what are those, let me look in my special book"

i found on a couple time that i've dealt with them that they have no idea what there saying or have no idea what your talking about. them mopac guys usually can help all hi-po ideas take form, they know what you need and what other things will usually work best with it. the guys that lordco said i'd never get a carb for my 3.3 i-6, so i went to mopac and they showed me three or four carbs i could use.

go figure.

project2OOOGT · 07-13-2002, 12:54 PM

Panhandle Performance.............. always get great service and excellent advice
http://www.panhandleperformance.com/

Fox Body · 07-13-2002, 11:52 PM

Mustangbelle306, I'll make sure never to go to the the "Pep Beeyatchz" in Pleasantville, NJ.

82GT, how ya been?! I've been back here for about a 1.5 weeks so far. ...Miss my buddies here...

As far as the parts stores, I think much of the quality has to do with the service quality and parts quantity. Between AZ and AAP, both quality and quantity seem to fluctuate, whereas it has only gotten better with the PepBoyses (<---plural of PepBoys--just in case you were wondering

) in my area. HA! and one of th AAPs that my friend goes to, this woman behind the counter likes to argue with him on what part he needs.

He always makes it a point to rub it in her face when he proves her WRONG without a shadow of a doubt... quite entertaining it is....

mustangman65_79 · 07-15-2002, 07:50 AM

I go to Kragen Auto parts here. It's also called checkers and Shuck's in other places. Friendly ppl, and they have all kinds of lifetime warranty parts. Good prices too.

Mach 1 · 07-15-2002, 11:45 AM

I used to think NAPA carried a slightly superior line of parts than most discount chain stores.

I went to buy some O2 sensors one day, went to NAPA and they handed me this cheap looking piece of junk with a very short harness connector wire and wanted $75.00 for one of them.

I said "no thanks", proceeded to "Autozone" where I got the same "bosch" 02 sensors that Ford uses from the factory for $40.00 a piece.

Havent been back to Napa for parts since.

blue00gt · 07-15-2002, 01:18 PM

You mean Summit isn't a 'general purpose auto store'?

07-11-2002, 09:39 PM	#1
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	Which is your favorite general auto parts store? Recently, I've had to go to these frequently for some reason and the Autozone and Advanced Auto Parts in my area has really been pissing me off. When I go to an auto parts store looking for nuts and bolts, I expect them to have a good selection. I don't even screw with Discount Auto. Everytime I go there, it seems like no one's running the store, I could steal some oil and they'd never know. I have NEVER had ANY bad experience with PepBoys where I live. IF the other auto parts places don't have what I need, I know I can count on PepBoys. THe personnel there are friendly and knowledgeable and there are always enough people around to help out a customer. THe other places I go you always have to wait for at 5-10 minutes couse eveybody (which is about 3 people) is helping other customers. Sucks. Many of these guys can only read what's on the computer. I was talking about this with a friend of mine and it was almost opposite. He has had nothing but bad experience with PepBoys (couldn't be in Augusta though, maybe South Carolina). He likes Advanced Auto Parts. NAPA is pretty good IMO, also. THey are an old-school parts place that seems to have very knowledgeable staff there. MOst of the time it just depends on who works there. FOr me though in my experience in Augusta, GA, it seems like AA, AZ, and Discount, are just superficial parts places. THey jsut subscribe to what is popular. PepBOys and NAPA to me are the real parts places. YOu may have totally diff experiences...... __________________ 351W-powered 1979 Ford Mustang Ghia notchback '79 Video @ Idle Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials; 14 x 4” K&N X-stream air filter. '92 GT (5-speed) Small In Car Video Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals... "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

07-11-2002, 10:20 PM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	NAPA, hands down. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

07-11-2002, 11:56 PM	#4
mustangII460 Factoy Five Roadster Join Date: May 2000 Location: Sevier Co,Tennessee Posts: 1,681	Napa, you get what you pay for. O wait, somthing to add to that. Even though you may buy a brand name part from Autozome or Abvanced Auto or where ever, your not getting the best part from that name brand. Example: Dealerships get the best of a particular run of the part. A Motorcraft plug will be better if bought from the Ford dealer. Other venders sell the "B" run of the parts etc. etc. I have a friend that is a major supplier of parts in my area. And he broke this wonderful news to me. Last edited by mustangII460; 07-12-2002 at 12:02 AM..

07-12-2002, 01:00 AM	#5
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	I used to go to Napa alot, but the one around here doesnt have much in stock, so you have to order everything, so now I go to Discount Auto Parts, they tend to have everything. __________________ *Joe!* 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com

07-12-2002, 06:22 PM	#6
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	For just general stuff (oil, filters, plugs, etc.) , I'll go to AutoZone because it's close to my house. For specific '66 Mustang parts I'll go to John's Mustang here in Houston. For suspension parts, I like Mustang Plus in CA. For performance parts, I just mail order them from Summit. I think that about covers my purchases. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

07-11-2002, 09:53 PM	#2
digital3.3 Guest Posts: n/a	we got a really cool place here in the lower mainland in BC called Mopac they are usually a great place to deal with.

07-12-2002, 06:50 PM	#7
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Parts stores I prefer NAPA - but for routine items that have a brand name, Pep Boys and Auto Zone are usually a bit cheaper. Depends on the item you want. I buy my Mobil oil, Motorcraft filters and Autolite plugs at Wal-Mart, my plug wires and some other parts at Pep Boys and the real parts at NAPA. I also use Mustangs Unlimited for certain Mustang-specific parts. Shop where they have what you need and at the best price. That may be NAPA, Pep Boys or some other place but I don't play favorites.

07-12-2002, 08:01 PM	#8
Mustangbelle306 Yay for Chickys Join Date: Feb 2001 Posts: 1,532	Fox Body: If you want courteous service, don't EVER EVER EVER come to the Pep Beeyatchz in Pleasantville, NJ Actually, when I went to go pick up my paycheck today (remember I quit 2 weeks ago) I found out that the asst manager walked out, along with 1 parts guy and 2 cashiers...guess it wasn't just me!

07-12-2002, 08:41 PM	#9
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	70 and a scanner? I think they want folks with a 70 IQ and a scanner in many of these places. I get a kick out of the facial expressions when I say it's for a '66 Mustang with a 289 block, 302 crank, TFTW heads, Edelbrock Performer, 625 Road Demon, 9.5/1 compression, Tri-Y headers, etc, etc. Please just sell me the plugs that I asked for to begin with. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

07-12-2002, 09:26 PM	#10
nickj8685 Registered Member Join Date: Jul 2002 Location: Russellville MO, where men are men and sheep are scared Posts: 66	I prefer Oreilly. I went to Autozone one time to get a headlight for a car I used to drive (79 Fairmont), this kid was working the counter and he asked me what I needed. I told him I needed the low beam light for a 79 Fairmont. He gets on his computer, looks it up and brings me a big round headlight. I told him he had the wrong head light. He told me that this was what his computer called for. I pointed out the window to the car and said "do you see that car? That's my Fairmont." He said "no that's a Thunderbird". I have found that most people who work at Autozone are idiots.

07-12-2002, 10:37 PM	#12
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	I don't know if most people ever heard of this chain store but I like A&A auto parts. I think it's only in the Pa. area. Foxbody, when did you get back? Good to hear from you again!! __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

07-13-2002, 09:33 AM	#14
polara7777 Registered Member Join Date: Apr 2002 Location: Columbus, MS Posts: 324	My choices here a re pretty slim. Autozone, Napa, Advanced, and a couple small stores. I prefer Advanced because the people there are great and they carry a decent line of Hi-Po parts in stock. And in most cases can get what they don't have overnighted. Napa is alright but as someone said they have to order EVERYTHING!. 'Yeah I need a set of champions for a 67 Dodge but with a 18 heat index.' 'Sure! We can have them here in 2 days!' Screw that. We also have a decent Hi-Po shop in town. He has to order most everything but can get anything you ever wanted for anything. __________________ -Ian Christopher -84 VW Vanagon (Stock so far but it barks 3rd ) -67 Dodge Polara (383 punched 30, Heavy head work, Mopar Performance single plane intake, Holley 750, electric fuel pump, Holley regulator, .484 duration cam, FRIED bottom end!) DOH!!! Fried the #1 rod bearing. Stroker kit coming! -01 Kawasaki Ninja 250 (Clear lenses, shaved fender, rear signals in the rear housing, baffles removed, Deals Gap dragon on the tail.)

07-13-2002, 12:54 PM	#16
project2OOOGT Registered Member Join Date: Jun 2002 Location: here Posts: 23	Panhandle Performance.............. always get great service and excellent advice http://www.panhandleperformance.com/ __________________ http://www.pnrracing.com/Readers%20R...T/Inthecar.WMV http://www.pnrracing.com/Readers%20R...0GTexhuast.WMV COP??? WHAT COP??? bassani X underdrive pullies hpm subframes kirban short shifter mac cai mac cat back 17x9 cobra r's 315/35/17 nitto dr in the back 255/45/17 kuhmo ecsta's in the front 3.90 gear auto logic chip is next

07-13-2002, 11:52 PM	#17
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	:) Ha! Seems like PepBoys and "other" is winning... Mustangbelle306, I'll make sure never to go to the the "Pep Beeyatchz" in Pleasantville, NJ. 82GT, how ya been?! I've been back here for about a 1.5 weeks so far. ...Miss my buddies here... As far as the parts stores, I think much of the quality has to do with the service quality and parts quantity. Between AZ and AAP, both quality and quantity seem to fluctuate, whereas it has only gotten better with the PepBoyses (<---plural of PepBoys--just in case you were wondering ) in my area. HA! and one of th AAPs that my friend goes to, this woman behind the counter likes to argue with him on what part he needs. He always makes it a point to rub it in her face when he proves her WRONG without a shadow of a doubt... quite entertaining it is.... __________________ 351W-powered 1979 Ford Mustang Ghia notchback '79 Video @ Idle Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials; 14 x 4” K&N X-stream air filter. '92 GT (5-speed) Small In Car Video Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals... "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

07-15-2002, 07:50 AM	#18
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	I go to Kragen Auto parts here. It's also called checkers and Shuck's in other places. Friendly ppl, and they have all kinds of lifetime warranty parts. Good prices too. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

07-15-2002, 11:45 AM	#19
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	I used to think NAPA carried a slightly superior line of parts than most discount chain stores. I went to buy some O2 sensors one day, went to NAPA and they handed me this cheap looking piece of junk with a very short harness connector wire and wanted $75.00 for one of them. I said "no thanks", proceeded to "Autozone" where I got the same "bosch" 02 sensors that Ford uses from the factory for $40.00 a piece. Havent been back to Napa for parts since. __________________ 2002 GT 1993 GT (SOLD) '93 Mustang GT RHC member #142

07-15-2002, 01:18 PM	#20
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	You mean Summit isn't a 'general purpose auto store'? __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why do morons work in auto stores? PLEASE HELP!	Agent_4573	Windsor Power	6	07-29-2002 07:41 PM
Trading Notch for parts	Coupe Devil	Blue Oval Lounge	3	04-20-2002 12:58 PM
Any problems from ABC Exclusive Auto Parts?	Brian88	Windsor Power	4	02-22-2001 05:43 AM