Pics Of My Other Car

bri32z · 11-23-2001, 08:58 PM

tHIS IS WHAT i DRIVE EVERYDAY WHEN i GET OUT OF MY STANG.

SPECS ARE AS FOLLOWS:

Based on Model MACK MR688S
Length 51 ft / 4 in (15.7m)
Width 8 ft / 2 in (2.50m)
Height 13 ft / 1 in (3.98m)
Wheelbase 309 in (7,849mm)
Front axle weight 52,833 lbs (23,962kg)
Rear axle weight 55,346 lbs (25,101kg)
Approx total weight 108,179 lbs (49,063kg)

Weights are approximate and include pump, boom, truck, full hydraulic oil, driver and some fuel. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
Boom Specifications • Roll and Fold Design

Height & Reach
Vertical reach
188 ft / 1 in (57.30m)
Horizontal reach 174 ft / 3 in (53.10m)
Reach from front of truck* 164 ft / 7 in (50.20m)
Reach depth 137 ft / 10 in (42.00m)
Unfolding height 52 ft / 2 in (15.90m)
*Applies to units mounted on PMA stock truck-MACK MR688S

4-Section Boom
1st section articulation
175°
2nd section articulation 180°
3rd section articulation 180°
4th section articulation 210°

1st section length 29 ft / 10 in (9.10m)
2nd section length 43 ft / 8 in (13.25m)
3rd section length 50 ft / 6 in (15.40m)
4th section length 50 ft / 6 in (15.43m)

General Specs
Pipeline size (ID) metric ends
with couplings
5 in
5.5 in (125mm)
(140mm)
Rotation 365°
End hose-length (heavy duty) 10 ft (3m)
End hose-diameter 5 in (125mm)
Outrigger spread L-R — front telescopic diagonal 34 ft / 9 in (10.60m)
Outrigger spread L-R — rear swing-out 32 ft / 9 in (9.98m)

Pump Specifications 58.16H 58.20H

Output-
rod side
piston side 210 yd3/hr (160 m3/hr)
146 yd3/hr (112 m3/hr) —
260 yd3/hr (200 m3/hr)
Pressure- rod side
piston side 1233 psi (85 bar)
1885 psi• (130 bar)• —
1233 psi• (85 bar)•
Concrete cylinder diameter 9 in (230mm) 9 in (230mm)
Stroke length 83 in (2100mm) 83 in (2100mm)
Max strokes
per minute- rod side
piston side 31
21 —
28
Volume control 0-Full 0-Full
Vibrator Standard Standard
Hard-chromed concrete cylinders Standard Standard
Hydraulic system Free Flow Free Flow
Hydraulic system pressure 5075 psi (350 bar) 5075 psi (350 bar)
Differential cylinder diameter 5.5 in (140mm) 5.5 in (140mm)
Rod diameter 3.1 in (80mm) 3.1 in (80mm)
Maximum size aggregate 2.5 in (63mm) 2.5 in (63mm)
Water-tank pedestal
outrigger 238 gal (900L)
185 gal (700L) 238 gal (900L

Five0 · 11-23-2001, 09:44 PM

Hey man, what kind of gas footage do you get out of that thing, what is the rwhp?

bri32z · 11-23-2001, 09:48 PM

rWHP IS 460, 60ft time is around7seconds

LoL

69fastback · 11-23-2001, 10:34 PM

Damn that is a big truck.

bri32z · 11-23-2001, 10:38 PM

Believe it or not it drives like a car with the exception of sharp turns it is a blast to drive and operate. Love sittin' up high and looking down in cars

Crazy Horse GT · 11-23-2001, 10:57 PM

hey bri they need any help down there in atlanta hehe jk i guess i'll try to hang on to my mech. job if it lasts much longer see ya.

11-23-2001, 08:58 PM	#1
bri32z street racing junkie Join Date: Sep 2001 Posts: 231	Pics Of My Other Car tHIS IS WHAT i DRIVE EVERYDAY WHEN i GET OUT OF MY STANG. SPECS ARE AS FOLLOWS: Based on Model MACK MR688S Length 51 ft / 4 in (15.7m) Width 8 ft / 2 in (2.50m) Height 13 ft / 1 in (3.98m) Wheelbase 309 in (7,849mm) Front axle weight 52,833 lbs (23,962kg) Rear axle weight 55,346 lbs (25,101kg) Approx total weight 108,179 lbs (49,063kg) Weights are approximate and include pump, boom, truck, full hydraulic oil, driver and some fuel. Varies with options selected. Dimensions will vary with different truck makes, models and specifications. Boom Specifications • Roll and Fold Design Height & Reach Vertical reach 188 ft / 1 in (57.30m) Horizontal reach 174 ft / 3 in (53.10m) Reach from front of truck* 164 ft / 7 in (50.20m) Reach depth 137 ft / 10 in (42.00m) Unfolding height 52 ft / 2 in (15.90m) *Applies to units mounted on PMA stock truck-MACK MR688S 4-Section Boom 1st section articulation 175° 2nd section articulation 180° 3rd section articulation 180° 4th section articulation 210° 1st section length 29 ft / 10 in (9.10m) 2nd section length 43 ft / 8 in (13.25m) 3rd section length 50 ft / 6 in (15.40m) 4th section length 50 ft / 6 in (15.43m) General Specs Pipeline size (ID) metric ends with couplings 5 in 5.5 in (125mm) (140mm) Rotation 365° End hose-length (heavy duty) 10 ft (3m) End hose-diameter 5 in (125mm) Outrigger spread L-R — front telescopic diagonal 34 ft / 9 in (10.60m) Outrigger spread L-R — rear swing-out 32 ft / 9 in (9.98m) Pump Specifications 58.16H 58.20H Output- rod side piston side 210 yd3/hr (160 m3/hr) 146 yd3/hr (112 m3/hr) — 260 yd3/hr (200 m3/hr) Pressure- rod side piston side 1233 psi (85 bar) 1885 psi• (130 bar)• — 1233 psi• (85 bar)• Concrete cylinder diameter 9 in (230mm) 9 in (230mm) Stroke length 83 in (2100mm) 83 in (2100mm) Max strokes per minute- rod side piston side 31 21 — 28 Volume control 0-Full 0-Full Vibrator Standard Standard Hard-chromed concrete cylinders Standard Standard Hydraulic system Free Flow Free Flow Hydraulic system pressure 5075 psi (350 bar) 5075 psi (350 bar) Differential cylinder diameter 5.5 in (140mm) 5.5 in (140mm) Rod diameter 3.1 in (80mm) 3.1 in (80mm) Maximum size aggregate 2.5 in (63mm) 2.5 in (63mm) Water-tank pedestal outrigger 238 gal (900L) 185 gal (700L) 238 gal (900L

11-23-2001, 09:44 PM	#2
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	Hey man, what kind of gas footage do you get out of that thing, what is the rwhp? __________________ James Cox RHC Member #44 nochevy@hotmail.com 1991 Mustang LX Dart iron eagle block, 4340 28oz 347 crank, 4340 h-beam rods, probe ultra light pistons canfield heads “race ported by Brent Frazier”, solid roller cam and lifters “custom grind”, kooks 1 7/8" race headers, and much more. Engine built by Brent Frazier.

11-23-2001, 10:34 PM	#4
69fastback IRAQ VET Join Date: Feb 2000 Location: high desert California Posts: 1,480	Damn that is a big truck. __________________ 428 Cobra Jet SOHC 5.4 3V F-150 96 mystic cobra 91 GT

11-23-2001, 10:57 PM	#6
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	hey bri they need any help down there in atlanta hehe jk i guess i'll try to hang on to my mech. job if it lasts much longer see ya. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CVSR / KCR Meet 2 - BBQ and Race day Pics	rustang girl	Blue Oval Lounge	3	01-03-2003 10:23 AM
Wheel database with PICS	EL PAALO	Blue Oval Lounge	2	08-02-2002 10:54 PM
Pics of My Pony! =)	1969Mach1	Blue Oval Lounge	19	04-04-2002 07:04 AM
New pics up (also Re: Exhaust Resonator Removal)	Gautam	Blue Oval Lounge	1	05-13-2001 07:49 PM

11-23-2001, 09:48 PM	#3
bri32z street racing junkie Join Date: Sep 2001 Posts: 231	rWHP IS 460, 60ft time is around7seconds LoL

11-23-2001, 10:38 PM	#5
bri32z street racing junkie Join Date: Sep 2001 Posts: 231	Believe it or not it drives like a car with the exception of sharp turns it is a blast to drive and operate. Love sittin' up high and looking down in cars