My 03 Snake - Page 2

POISNUS · 12-11-2002, 08:30 PM

MTU 50:

It was stolen from my girlfriend's house in Center Line. They had been watching it for a while. I fell asleep on the couch and woke up at midnight to move it in the driveway and it was gone, the hatch lock was laying in the street.

Ultraflo:

The 89 is really nothing special. It is a .030 over 69 351 with Wiseco flat-tops. It has a .630 solid roller. Gasket matched Windsor Sr. heads (milled to 58cc works out to 11.06:1). Victor Jr. intake and a 750 cfm Mighty Demon. The trans is a TH350 (it was already in the car, my buddy was a chevy guy didn't think a C-4 would hold up), a 4200 Coan converter. 8.8 with c-clip eliminators, 4.10 gear (broken Auburn Pro, going to a spool). I got a great deal on a lot of stuff. This was also before I had a car payment (now I have the Cobra). I wanted to go fast, but I didn't want to tear up my 88 (it ran 12's and had air).

I have a big shot plate, that was only used once, and produced a blown head gasket. On motor I ran a best of 11.09 @ 121 with only a 1.625 60'. If I could figure out the 60' it will run 10's, I know it will. I think the ailing auburn is partly to blame.

Jason

POISNUS · 12-11-2002, 08:33 PM

Here is the motor.

12-11-2002, 08:30 PM	#21
POISNUS Registered Member Join Date: Jul 2002 Location: Madison Heights, MI Posts: 357	MTU 50: It was stolen from my girlfriend's house in Center Line. They had been watching it for a while. I fell asleep on the couch and woke up at midnight to move it in the driveway and it was gone, the hatch lock was laying in the street. Ultraflo: The 89 is really nothing special. It is a .030 over 69 351 with Wiseco flat-tops. It has a .630 solid roller. Gasket matched Windsor Sr. heads (milled to 58cc works out to 11.06:1). Victor Jr. intake and a 750 cfm Mighty Demon. The trans is a TH350 (it was already in the car, my buddy was a chevy guy didn't think a C-4 would hold up), a 4200 Coan converter. 8.8 with c-clip eliminators, 4.10 gear (broken Auburn Pro, going to a spool). I got a great deal on a lot of stuff. This was also before I had a car payment (now I have the Cobra). I wanted to go fast, but I didn't want to tear up my 88 (it ran 12's and had air). I have a big shot plate, that was only used once, and produced a blown head gasket. On motor I ran a best of 11.09 @ 121 with only a 1.625 60'. If I could figure out the 60' it will run 10's, I know it will. I think the ailing auburn is partly to blame. Jason __________________ 2003 Satin Silver Cobra (12.47@113.6) 1989 GT Racecar (11.0x's on motor and an aborted spray run of 10.27) 1997 F-350 Powerstroke

12-11-2002, 08:33 PM	#22
POISNUS Registered Member Join Date: Jul 2002 Location: Madison Heights, MI Posts: 357	Here is the motor. __________________ 2003 Satin Silver Cobra (12.47@113.6) 1989 GT Racecar (11.0x's on motor and an aborted spray run of 10.27) 1997 F-350 Powerstroke

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lot of racing this weekend for the snake!!	CobraConv99	Stang Stories	1	12-20-2001 10:04 PM
98 Snake 1/4 mile times?	Steve H	Modular Madness	4	09-14-2001 06:06 PM
89 Snake 1/4 mile times?	Steve H	Modular Madness	0	09-12-2001 11:51 AM
97 Snake: 3.55's or 3.73's?	00'BlackSteed	Modular Madness	10	06-03-2001 12:32 PM
Removing 5.0 and snake emblems.....	88COBRA	Windsor Power	5	01-19-2001 12:34 AM