heads

LS1KILLER · 04-12-2004, 11:16 PM

i have a 302 60 over which is a 312 everything done to it that you can do decked,balanced, and what would be the best aluminum head to go with,and what valve size 194 or 202 and i had it built for 200 shot of nitrous and now down to heads and im done. if anybody can help me it would be appreciated!!!!!

Capri306 · 04-13-2004, 12:55 AM

I'm gonna move this thread over to the Windsor Power Forum. You're bound to get a lot more responses over there, and that's where it belongs, anyhoo.

Ieatcamaros · 04-13-2004, 07:53 PM

AFR 185's with the nitrous port work done on the exhaust gets my vote.

Scrapla · 04-14-2004, 10:10 AM

The Edelbrock RPM's are very nice the 2.02 intake and 60cc chambers would be work nice and there about $529 each.
http://www.jegs.com/cgi-bin/ncommerc...37&prmenbr=361

Dark Knight · 04-18-2004, 08:05 AM

you're going to run a 200 shot on a .060 over 302 block?

what cam, anwyay?

04-12-2004, 11:16 PM	#1
LS1KILLER Registered Member Join Date: Apr 2004 Location: genoa,west virginia Posts: 1	heads i have a 302 60 over which is a 312 everything done to it that you can do decked,balanced, and what would be the best aluminum head to go with,and what valve size 194 or 202 and i had it built for 200 shot of nitrous and now down to heads and im done. if anybody can help me it would be appreciated!!!!!

04-13-2004, 12:55 AM	#2
Capri306 Moderator Join Date: Sep 1998 Location: Grand Rapids, Michigan, USA Posts: 1,001	I'm gonna move this thread over to the Windsor Power Forum. You're bound to get a lot more responses over there, and that's where it belongs, anyhoo. __________________ Capri306, Moderator The Mustang Works Online 1979 Mercury Capri 1987 5.0L Mustang LX Notchback 1993 5.8L Eddie Bauer Bronco

04-13-2004, 07:53 PM	#3
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	AFR 185's with the nitrous port work done on the exhaust gets my vote. __________________ The sig says it all.

04-14-2004, 10:10 AM	#4
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	The Edelbrock RPM's are very nice the 2.02 intake and 60cc chambers would be work nice and there about $529 each. http://www.jegs.com/cgi-bin/ncommerc...37&prmenbr=361 __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

04-18-2004, 08:05 AM	#5
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	you're going to run a 200 shot on a .060 over 302 block? what cam, anwyay? __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM