Help with new ram manifold

RaceU4her · 02-25-2006, 02:26 PM

I just bought this ram manifold for my 289

its going to go on my 65 comet with an automatic and 4.11's. I cant find hardly any info on this manifold at all, any info you guys can give me on a good cam combo would help me out. My motor now has 10.5 to 1's in it. the carbs on the manifold are 450cfm's. really any info on how to get this thing to run good would help me out, thanks guys.

P.C. · 03-06-2006, 08:21 AM

Hi.Nice intake there.I would call a cam help line..comp cams.tell them what u have.I prefer something like a 284 or 292 advertised duration cams .They can help u.As far as carberation gos i dont think they make any smaller 4vs than those.289's dont need a ton of fuel..two 450's equal 900cfms thats alot for a 289.It seems to me what you have is good.I would maybe rebuild them.Good luck!

02-25-2006, 02:26 PM	#1
RaceU4her Registered Member Join Date: Feb 2006 Posts: 1	Help with new ram manifold I just bought this ram manifold for my 289 its going to go on my 65 comet with an automatic and 4.11's. I cant find hardly any info on this manifold at all, any info you guys can give me on a good cam combo would help me out. My motor now has 10.5 to 1's in it. the carbs on the manifold are 450cfm's. really any info on how to get this thing to run good would help me out, thanks guys.

03-06-2006, 08:21 AM	#2
P.C. SIT DOWN SHUT UP AND HOLD ON! Join Date: Feb 2006 Location: EASTON P.A. Posts: 27	Re: Help with new ram manifold Hi.Nice intake there.I would call a cam help line..comp cams.tell them what u have.I prefer something like a 284 or 292 advertised duration cams .They can help u.As far as carberation gos i dont think they make any smaller 4vs than those.289's dont need a ton of fuel..two 450's equal 900cfms thats alot for a 289.It seems to me what you have is good.I would maybe rebuild them.Good luck!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.6 intake manifold help	Zim28	Modular Madness	3	04-08-2005 07:21 PM
My intake manifold broke :(	Blackstare	Modular Madness	5	04-01-2005 06:50 AM
lines from carb to manifold?	rfisch	Classic Mustangs	1	01-31-2005 10:15 PM
351W crankcase evacuation	jse9	Windsor Power	19	09-03-2004 12:00 AM
Intake Manifold from 289 fit on 351W?	kirkdickinson	Windsor Power	9	09-27-2003 04:50 AM