flowmaster installation

95-STANG-Gt · 05-15-2002, 10:00 PM

hey guys....my friend and i were tryin to put in my new set of flow's and we ran into same trouble with the back hangers...i was wondering if they should just fit nicely without any modifcation?..if not what do i have to do?

thankx guys/gals
joe

Bad89stang · 05-16-2002, 12:57 AM

What is the problem? Why does it not fit? Are you installing a catback or just the mufflers?

91PA5liter · 05-16-2002, 01:24 PM

i just put flowmasters on my 91 yesterday and the hangers are a pain just hose down the rubber with some WD-40 and wiggle it around it should work its way through. I also might add that if you install the tailpipes first then the mufflers it makes it easier fitting the two togehter. This might have just been in my case but you never know. hope i helped.
later
ryan

gtsr515 · 05-16-2002, 04:37 PM

Exhaust installs are always a pain!, yes, try installing the tails first, WD'ing anything and everything to help, also when joining mufflers, although it's a little hokey, long, long bolts can help you to snug everything up tight.

Don't feel afraid to go to a muffler shop, as they are usually cheap for this kind of help.

05-15-2002, 10:00 PM	#1
95-STANG-Gt Registered Member Join Date: Dec 2001 Posts: 36	flowmaster installation hey guys....my friend and i were tryin to put in my new set of flow's and we ran into same trouble with the back hangers...i was wondering if they should just fit nicely without any modifcation?..if not what do i have to do? thankx guys/gals joe __________________ 95 Gt 5 speed kyb shocks and struts flowmasters B&M Shifter mac cold air induction hypertech u/d pulley set michelin pilot xgt tires

05-16-2002, 12:57 AM	#2
Bad89stang Registered Member Join Date: Aug 2001 Location: Ft. Worth, TX Posts: 456	Need more info... What is the problem? Why does it not fit? Are you installing a catback or just the mufflers? __________________ You're gonna need your seatbelt

05-16-2002, 01:24 PM	#3
91PA5liter Registered Member Join Date: Jan 2002 Location: PA Posts: 79	wd-40 i just put flowmasters on my 91 yesterday and the hangers are a pain just hose down the rubber with some WD-40 and wiggle it around it should work its way through. I also might add that if you install the tailpipes first then the mufflers it makes it easier fitting the two togehter. This might have just been in my case but you never know. hope i helped. later ryan

05-16-2002, 04:37 PM	#4
gtsr515 Registered Member Join Date: Nov 2001 Location: Sunny, Hot, Sebring, Florida Posts: 725	Exhaust installs are always a pain!, yes, try installing the tails first, WD'ing anything and everything to help, also when joining mufflers, although it's a little hokey, long, long bolts can help you to snug everything up tight. Don't feel afraid to go to a muffler shop, as they are usually cheap for this kind of help. __________________ Remember...2nd place is 1st place for losers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flowmaster Super 40 A Potential Scam!!	SilverSN95	Blue Oval Lounge	3	01-21-2004 02:24 PM
MAC or Flowmaster	TechWood	Windsor Power	6	08-12-2003 08:39 AM
anyone have installation tips for timing adjuster	slow98	Modular Madness	2	03-08-2003 02:29 AM
ease of installation	97 Stang	Modular Madness	5	09-09-2002 06:02 AM
Walbro inline fuel pump installation	Petey89	Windsor Power	1	06-22-2001 06:31 PM