Ford Motor is good enough for Chevy????

98yellow stang · 02-15-2001, 03:58 PM

Check this out.

http://cgi.ebay.com/ebaymotors/aw-cg...item=559183798

I think this guy was dropped on his head as a youngin. Now he just smokes alot of crack. I wrote him an email asking him if this was the RARE all wheel drive car. I will see what he says.
I just thought it was funny.
Light em up in your Ford powered Chevy.

------------------
My 98 yellow stang

Mods:
Magnaflow cat-back

02-15-2001, 04:24 PM

He may have changed the ad since you wrote to him, but what makes you say this is a Ford-powered car?

If the "4-cam, 32-valve" thing is making you wonder, GM did build such an engine - the LT5. Very rare. A much sought-after but not at all affordable engine swap candidate for a former Grand Prix owner such as myself. Read about it here
http://www.ranchochevy.com/chevrolet_zr1_lt5.html

------------------
Greg
91 LX Convertible

[This message has been edited by cleangreenmachine (edited 02-15-2001).]

fastang · 02-15-2001, 05:23 PM

DUDE! THATS A ZR1! It came with 4 cams and 32 valves. And where did you get "all wheel drive" from? Its RWD like all vettes. Its a rare rare car that ran 12's from the factory. Its sorta like a Cobra R only not as cool.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

98yellow stang · 02-15-2001, 07:29 PM

Ok fellas you showed me. I thought for sure that chevy would never do an over head cam motor. Seeing that even the new Z06 is still a push rod engine, making roughly the same horsepower. Oh well I guess that was my bad. Discrace to chevy to put a overhead cam motor in a car that has always had a push rod motor in it. But none the less a bad *** car.

You guys made me eat it with the ZR1 but I don't think you can say anything about this one
http://cgi.ebay.com/ebaymotors/aw-cg...item=559183798

Ad. by the same guy, claiming V-8 powered automatic. When a pic of a straight six is showed with an interior shot of three pedals. Obviously not a real smart cookie.

I guess you learn something new every day.

------------------
My 98 yellow stang

Mods:
Magnaflow cat-back

02-16-2001, 11:13 AM

Was it a disgrace for Ford to put an overhead cam engine in a car (the Mustang) that had always had a pushrod engine? Obviously, some in the Mustang crowd would answer this question differently according to their preference for a 5.0 or a mod motor.

I'm not trying to get on your case, but if things never changed, think of all the good stuff we'd miss out on!

Again, no disrespect, just something to think about.

------------------
Greg
91 LX Convertible

[This message has been edited by cleangreenmachine (edited 02-16-2001).]

02-15-2001, 03:58 PM	#1
98yellow stang Registered Member Join Date: Dec 2000 Location: Erie PA USA Posts: 38	Ford Motor is good enough for Chevy???? Check this out. http://cgi.ebay.com/ebaymotors/aw-cg...item=559183798 I think this guy was dropped on his head as a youngin. Now he just smokes alot of crack. I wrote him an email asking him if this was the RARE all wheel drive car. I will see what he says. I just thought it was funny. Light em up in your Ford powered Chevy. ------------------ My 98 yellow stang Mods: Magnaflow cat-back

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
302 Engine rebuild materials?	Tincan18	Windsor Power	5	04-25-2004 02:41 AM
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford?	KillaZ350	Blue Oval Lounge	24	06-29-2001 05:24 PM
Ford vs. GM in the movies	PGkelly	Blue Oval Lounge	4	03-26-2001 02:07 PM
WINDSOR FORD HEADS ARE THEY ANY GOOD???	joey50gt	Windsor Power	4	03-22-2001 09:32 PM
Any Good FORD Car Shows Coming up?	69boss302is2fast4u	Ford Show & Go	0	07-24-2000 06:58 PM

02-15-2001, 04:24 PM	#2
cleangreenmachine Guest Posts: n/a	He may have changed the ad since you wrote to him, but what makes you say this is a Ford-powered car? If the "4-cam, 32-valve" thing is making you wonder, GM did build such an engine - the LT5. Very rare. A much sought-after but not at all affordable engine swap candidate for a former Grand Prix owner such as myself. Read about it here http://www.ranchochevy.com/chevrolet_zr1_lt5.html ------------------ Greg 91 LX Convertible [This message has been edited by cleangreenmachine (edited 02-15-2001).]

02-15-2001, 05:23 PM	#3
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	DUDE! THATS A ZR1! It came with 4 cams and 32 valves. And where did you get "all wheel drive" from? Its RWD like all vettes. Its a rare rare car that ran 12's from the factory. Its sorta like a Cobra R only not as cool. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-15-2001, 07:29 PM	#4
98yellow stang Registered Member Join Date: Dec 2000 Location: Erie PA USA Posts: 38	Ok fellas you showed me. I thought for sure that chevy would never do an over head cam motor. Seeing that even the new Z06 is still a push rod engine, making roughly the same horsepower. Oh well I guess that was my bad. Discrace to chevy to put a overhead cam motor in a car that has always had a push rod motor in it. But none the less a bad *** car. You guys made me eat it with the ZR1 but I don't think you can say anything about this one http://cgi.ebay.com/ebaymotors/aw-cg...item=559183798 Ad. by the same guy, claiming V-8 powered automatic. When a pic of a straight six is showed with an interior shot of three pedals. Obviously not a real smart cookie. I guess you learn something new every day. ------------------ My 98 yellow stang Mods: Magnaflow cat-back

02-16-2001, 11:13 AM	#5
cleangreenmachine Guest Posts: n/a	Was it a disgrace for Ford to put an overhead cam engine in a car (the Mustang) that had always had a pushrod engine? Obviously, some in the Mustang crowd would answer this question differently according to their preference for a 5.0 or a mod motor. I'm not trying to get on your case, but if things never changed, think of all the good stuff we'd miss out on! Again, no disrespect, just something to think about. ------------------ Greg 91 LX Convertible [This message has been edited by cleangreenmachine (edited 02-16-2001).]