© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-11-2001, 02:31 PM | #1 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
Indiana Stangers at US 41 - Track is rented!!
I know this doesn't belong in the Windsor forum, but I wanted to post it here for those that don't visit the other forums. If you must move it to the lounge please wait 2 weeks
We have the track rented for Saturday Oct 27th. Bring your friends. We need signups ASAP!!! Here's the signup page - http://www.indianastangers.com/event-sched.htm Thanks, and see ya at the track! ------------------ Gunning for 12's! Buy your parts here ICQ# 42269241 |
10-11-2001, 03:42 PM | #2 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
YES!!!!
finally get to compare the AOD-T5 swap times at a good track i went to IRP the other night and had a horrible time again, that place sucks on test and tune nights, got 3 runs in and it felt like i was launching on ice i did get to race a viper though, and he didnt even beat me by a full second (12.9 to my 13.8) sorry to ramble on, im really excited about getting up there again, hopefully we can get 50-60 cars so its not TOO packed but enough to keep the price down im off to sign up now! ------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft |
10-11-2001, 04:06 PM | #3 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
I wish my car was done
------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. |
10-12-2001, 01:39 AM | #4 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
You can come anyway if you want Smokedawg. I was there last time without my car and still had fun watching everyone else tear up the track. Although I did wish my car was there.
------------------ Gunning for 12's! Buy your parts here ICQ# 42269241 |
10-12-2001, 12:14 PM | #5 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Wheres it going to be at on 41??
------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. |
10-12-2001, 01:06 PM | #6 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
Here's a page from the Drag Way's web site with a map http://www.dragnbreath.com/US41Dragw...ir.html#Anchor
------------------ Gunning for 12's! Buy your parts here ICQ# 42269241 |
10-12-2001, 01:21 PM | #7 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
how long does it take you to get to the east side of indy from knightstown? about 30-40min? from my house (on the eastern border of marion county) it takes right at 2 hours to get there including one stop for gas and food, so i'd guess about 2 and a half for you, if its not too far out of your way, you could meet me somewhere around here and follow me, i've been there 3 times and only got lost once
------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft |
10-12-2001, 01:49 PM | #8 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
Drew, are you going to be heading to the track from Terre Haute, or Indy?
|
10-12-2001, 03:50 PM | #9 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Hey,
Its about a 40 minute drive to sams club there on the east side. What time is it going to start and end on that saturday? I might have a few more of my buddies come with me. I will get in touch with you and let you know. Thanks Derek ------------------ 347 Stroker Motor: Balanced, Tremec, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, 30lb Bosch Injectors, Holley AFPR, March Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Wires, Ram Air, K&N, 73mm MAF, 70mm TB, FlowMaster w/BBK Offroad H-Pipe, BBK Headers, Hurst Shifter, 3:73 Gears, Ram Clutch, Cross Drilled Rotors, AC, smog, and rear seat deleted, battery relocated Awaiting new heads, intake, custom cam |
10-13-2001, 04:14 PM | #10 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Kevin, im not sure yet, if my buddy's from indy are planning on going i'll probably head to indy friday night and leave from there saturday morning
smokedawg, do you go to that friday night cruise in at sams club often? if so what car do you take that i would recognize? i live about 5 minutes from there and usually cruise through just to see whats goin on most fridays during the summer |
10-13-2001, 04:23 PM | #11 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
It's going to start at 9:00am and end whenever. If you are bringing friends who plan to run their cars please sign them up. I really need to know how many are going to be there in advance.
|
10-15-2001, 03:07 PM | #12 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
I only went to the sams club car show once this past year. I was parked along the row right at Washington about directly in the middle of the row. It was me in my 90GT and beside me was my buddy in his red 2001 WS6 trans-am. At the time, he had his hood shut because he had no mods. I had my hood open and I just put my Cobra R's on that day. It was about half way through the summer.
------------------ 347 Stroker Motor: Balanced, Tremec, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, 30lb Bosch Injectors, Holley AFPR, March Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Wires, Ram Air, K&N, 73mm MAF, 70mm TB, FlowMaster w/BBK Offroad H-Pipe, BBK Headers, Hurst Shifter, 3:73 Gears, Ram Clutch, Cross Drilled Rotors, AC, smog, and rear seat deleted, battery relocated Awaiting new heads, intake, custom cam |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Track conditions | Eric4Nitrous | Windsor Power | 12 | 11-22-2002 10:59 PM |
Indiana Stangers at US 41 - Track is rented!! | 2FastLX | Racer's Club House | 1 | 10-24-2001 12:02 PM |
Indiana Stangers - Where you at? | 2FastLX | Blue Oval Lounge | 6 | 07-10-2001 12:34 AM |
Indiana Stangers to meet in Terre Haute!!! | 2FastLX | Blue Oval Lounge | 10 | 06-21-2001 11:37 PM |
indiana stangers | 91evilstang | Blue Oval Lounge | 4 | 06-18-2001 02:01 PM |