'Stang Analyzer Questions.....

bigwhitecobra · 08-26-2001, 02:13 PM

I know it's meant for rough estimations, but is there anyway to get your 1/8th mi ET converted to 1/4mi ET while still allowing for different gear ratios?
Also, what gearing is the Analyzer set for now? If it's a stock gear ratio, then it doesn't give a good estimate of power for us guys and gals that have changed our gears.
One more thing and I'm done, for those that run slicks, does the Analyzer compensate for the changing final drive ratios as the tire circumfrence changes?
These are the questions I ask myself when I'm at home alone and the power is out. Heh heh.
Later.

------------------
The Black Mamba 11.2@124
1994 Cobra
'00 Focus ZTS- K&N drop in. 10.66@66mph 1/8mile

Rev · 08-26-2001, 07:50 PM

The truth is that the Stang Analyzer is a rudimentary program. If you want even a moderately decent one, you'll need to fork over some money. I have one from Performance Trends that is at least OK. DRAG RACING ANALYZER.

Probably 50 different inputs that can at least do a somewhat decent job of simulating a car at the drag strip. Check out the demo at Performance Trends web site.

Rev

------------------
'66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph
1/4 mi.

Five0 · 08-26-2001, 08:21 PM

It should be real close.

My times are 8.078 1/8th 12.565 1\4 and 86.53 1/8th 109.38 1\4

the stang analyzer says I should run a 12.60 @109.03 when I give it my 1/8th mile times.

I don't know if gears make a big change in the program but I run 3.55 gears.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

08-26-2001, 02:13 PM	#1
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	'Stang Analyzer Questions..... I know it's meant for rough estimations, but is there anyway to get your 1/8th mi ET converted to 1/4mi ET while still allowing for different gear ratios? Also, what gearing is the Analyzer set for now? If it's a stock gear ratio, then it doesn't give a good estimate of power for us guys and gals that have changed our gears. One more thing and I'm done, for those that run slicks, does the Analyzer compensate for the changing final drive ratios as the tire circumfrence changes? These are the questions I ask myself when I'm at home alone and the power is out. Heh heh. Later. ------------------ The Black Mamba 11.2@124 1994 Cobra '00 Focus ZTS- K&N drop in. 10.66@66mph 1/8mile

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motor Swap questions 88 cougar to 84 stang	5.0 Fiend	Windsor Power	33	08-25-2004 07:41 PM
Quick Help Questions - Need to pass inspection on the 66 Stang!	bigbandjohn	Classic Mustangs	10	01-26-2003 10:14 PM
Car Audio System in a 90 LX v8 stang	ziggy_2k	Audio, Security, & Electronics	0	04-30-2002 11:48 AM
Police package stang questions	SYCLONE	Blue Oval Lounge	8	06-25-2001 02:17 AM

08-26-2001, 07:50 PM	#2
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	The truth is that the Stang Analyzer is a rudimentary program. If you want even a moderately decent one, you'll need to fork over some money. I have one from Performance Trends that is at least OK. DRAG RACING ANALYZER. Probably 50 different inputs that can at least do a somewhat decent job of simulating a car at the drag strip. Check out the demo at Performance Trends web site. Rev ------------------ '66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph 1/4 mi.

08-26-2001, 08:21 PM	#3
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	It should be real close. My times are 8.078 1/8th 12.565 1\4 and 86.53 1/8th 109.38 1\4 the stang analyzer says I should run a 12.60 @109.03 when I give it my 1/8th mile times. I don't know if gears make a big change in the program but I run 3.55 gears. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft