Stupid question of the day.....

Her99GT · 07-06-2001, 08:55 PM

Could someone please explain to me why or if a manual is faster that an automatic? I have a '99 GT and I thought I had read somewhere that the '99 and up automatic stangs could hold there own with manuals?

Thanks, Beth

tireburner163 · 07-07-2001, 01:44 AM

The converter on the auto eats up a lot more power than the manuals clutch does. 99+ auto are still slower that sticks

------------------
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"

If it ain't broke, you ain't tryin hard enough

Mercury · 07-07-2001, 02:08 AM

The torque convertor eats up power because there is slipage. In automatics, there is not direct link between the engine and transmissions mechanical parts. The power loss in a Auto is substantionally higher due to the slippage that occurs in the Torque convertor.

To explain it easily, the torque convertor has one part that is connected to the engine, and another part connected to the tranny. The Turbine (Torque convertor part connected to teh engine) flings tranny fluid against the vanes of the part connected to the tranny, the force of the fluid hitting the part causes it to turn, there by giving you motion.

In a manual tranny, there is a direct link between the engine and tranny, and no slipage (as long as your clutch assembly isnt screwed). You still get power loss in a manual tranny, but its because of directional force, ie like the rear axle where the force has to make a 90 Degree turn.

Hope I was able to help.

------------------
64 1/2 "D" code Red Mustang Coupe. 289, C4, Mallory duel point. Ported & Polished 65 heads shaved .01 with 351 valves, 11:1 comp, 1.7:1 rockers, blue wolverine lumpy cam, modified 4100 Hipo 4 barrel. GT Apperance pkg. And to many others to list
2000 Perf Red Mustang GT. 5spd. BBK Underdrive pulleys, Flotech off-road H pipe. Hurst T-Handle, 40 series Flowmasters, Steeda Tri-Ax
64 1/2 red 6cyl coupe.

07-06-2001, 08:55 PM	#1 (permalink)
Her99GT Registered Member Join Date: Apr 2001 Location: Houston, Texas USA Posts: 11	Stupid question of the day..... Could someone please explain to me why or if a manual is faster that an automatic? I have a '99 GT and I thought I had read somewhere that the '99 and up automatic stangs could hold there own with manuals? Thanks, Beth

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stupid question	GerryGT	Modular Madness	4	11-14-2003 12:49 PM
A stupid question I hate asking about exhaust sound	jwboner	Windsor Power	4	08-05-2003 06:55 PM
Very Stupid Question - Intake?	apenn	Modular Madness	21	09-23-2002 10:56 AM
Really stupid question but I don't know	SCOTTLT79	Windsor Power	5	07-25-2002 01:27 PM
Stupid question needs answer :)	Vector	Windsor Power	8	07-18-2001 05:24 AM

07-07-2001, 01:44 AM	#2 (permalink)
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,127	The converter on the auto eats up a lot more power than the manuals clutch does. 99+ auto are still slower that sticks ------------------ 1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang. The "Guetto Glider" If it ain't broke, you ain't tryin hard enough

07-07-2001, 02:08 AM	#3 (permalink)
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	The torque convertor eats up power because there is slipage. In automatics, there is not direct link between the engine and transmissions mechanical parts. The power loss in a Auto is substantionally higher due to the slippage that occurs in the Torque convertor. To explain it easily, the torque convertor has one part that is connected to the engine, and another part connected to the tranny. The Turbine (Torque convertor part connected to teh engine) flings tranny fluid against the vanes of the part connected to the tranny, the force of the fluid hitting the part causes it to turn, there by giving you motion. In a manual tranny, there is a direct link between the engine and tranny, and no slipage (as long as your clutch assembly isnt screwed). You still get power loss in a manual tranny, but its because of directional force, ie like the rear axle where the force has to make a 90 Degree turn. Hope I was able to help. ------------------ 64 1/2 "D" code Red Mustang Coupe. 289, C4, Mallory duel point. Ported & Polished 65 heads shaved .01 with 351 valves, 11:1 comp, 1.7:1 rockers, blue wolverine lumpy cam, modified 4100 Hipo 4 barrel. GT Apperance pkg. And to many others to list 2000 Perf Red Mustang GT. 5spd. BBK Underdrive pulleys, Flotech off-road H pipe. Hurst T-Handle, 40 series Flowmasters, Steeda Tri-Ax 64 1/2 red 6cyl coupe.

Sponsored Links