Suspension stuff...

Skyman · 01-11-2001, 09:36 PM

Im going around and around on doing this suspension stuff. Grantelli Motorsports is tryin to talk me into doing a full tubular front suspesion. A-Arms, Coil overs, and K-member. For around $849.. then $400 for install.
I have busted motor/tranny mounts so they need to be pulled anyways to get fixed also.

I found a guy on the corral selling this..HAL TUBULAR K MEMBER 250.00..TUB A ARMS 250.00..COIL OVER KIT 225.00

are these a good deal? as good as granatelli's stuff? And Grantelli said it would take off around 200lbs on the front end of my car.

What other suspension sstuff should I have done? Springs at the same time too? My budgets coming close to an end as I have to get the Supercharger all dialed in too.

Recommendations?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

97snakedriver · 01-11-2001, 10:29 PM

Are you thinking for the strip or for the road course?

Skyman · 01-12-2001, 05:02 AM

Strip, but I like to handle fairly well on the street. I dont need an all out drag suspension, but 1.7 60's would be nice for a change.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft.
Best ET 13.2@106mph Needs tuning...

Mustang92 · 01-12-2001, 07:50 AM

There is a group purchase on the D & D tubular front end kit for like $589 plus some other suspension parts. I can get the GP info if you'd like.

------------------
00 GT, MAC Offroad H, Pullies, 4.10’s, Flows, UPR shifter, subframes, LCA’s, air filter, Weld Pro Stars, Nitto DR’s 13.19@103.86 (1.82 60ft) 244.6 RWHP
M/M 100
88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool…

01-11-2001, 09:36 PM	#1
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Suspension stuff... Im going around and around on doing this suspension stuff. Grantelli Motorsports is tryin to talk me into doing a full tubular front suspesion. A-Arms, Coil overs, and K-member. For around $849.. then $400 for install. I have busted motor/tranny mounts so they need to be pulled anyways to get fixed also. I found a guy on the corral selling this..HAL TUBULAR K MEMBER 250.00..TUB A ARMS 250.00..COIL OVER KIT 225.00 are these a good deal? as good as granatelli's stuff? And Grantelli said it would take off around 200lbs on the front end of my car. What other suspension sstuff should I have done? Springs at the same time too? My budgets coming close to an end as I have to get the Supercharger all dialed in too. Recommendations? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft. Best ET 13.2@106mph Needs tuning...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1991 LX Suspension MODS	Chuck Boone	Windsor Power	2	02-24-2003 08:25 AM
Mustang suspension	Skankin	Corner Carvers Delight	1	08-17-2001 05:10 PM
suspension stuff for sale	spinemup	Corner Carvers Delight	0	06-06-2001 07:37 AM
SUSPENSION, SUSPENSION, SUSPENSION . PLEASE HELP!	BowTie Eater 5 Liter	Windsor Power	11	02-03-2001 07:18 AM
Classic stuff from ClubSI....	Hammer	Blue Oval Lounge	2	01-11-2001 10:32 PM

01-11-2001, 10:29 PM	#2
97snakedriver Registered Member Join Date: May 1999 Location: Blacksburg, VA Posts: 1,526	Are you thinking for the strip or for the road course?

01-12-2001, 05:02 AM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Strip, but I like to handle fairly well on the street. I dont need an all out drag suspension, but 1.7 60's would be nice for a change. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shorty headers, Offroad-Hpipe, 2chamber flows, 36psi FPR, playing with timing still, 70mm tb, 73mm maf, 24lb injectors, K/N, March Crank pulley, MSD6a, 9mm wires and FMS Aluminum driveshaft. Best ET 13.2@106mph Needs tuning...

01-12-2001, 07:50 AM	#4
Mustang92 Drag Racer! Join Date: Nov 1999 Location: Lake Worth, FL USA Posts: 757	There is a group purchase on the D & D tubular front end kit for like $589 plus some other suspension parts. I can get the GP info if you'd like. ------------------ 00 GT, MAC Offroad H, Pullies, 4.10’s, Flows, UPR shifter, subframes, LCA’s, air filter, Weld Pro Stars, Nitto DR’s 13.19@103.86 (1.82 60ft) 244.6 RWHP M/M 100 88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool…