timing chain

69bronco · 01-19-2006, 04:24 PM

hey where is the best place to find a timing chain and gears,Cheap, for a 360 fe ford engine. www.summitracing.com has a set up for $20, anyplace better? thanks

84LX89GT · 01-19-2006, 05:02 PM

$20 sounds like a good price. When i had my '84 5.0L the timing chain jumped at 150,000 miles and re-used the sprockets (worked fine) and just bought a new chain only. If the engine you have is a '71+ engine i would get a chain and also a crank sprocket since many ford engines had the crank sprocket retarded 4* for better emissions - the way you can tell if this is the case is when you've got the front cover off and have access to the sprocket see if the crank key-way (the thing that sticks up) is lined up with a dot on the crank sprocket. If it is and it doesn't look too worn i'd re-use it. If it's not aligned i'd get a '71 or earlier 360/390/428 crank sprocket - this would give you an extra 20-30 horsepower for a very small price.
Just make sure that the teeth aren't worn and you should be fine with just replacing the chain.
Good luck,

69bronco · 01-19-2006, 05:41 PM

thanks for the tip

grey88gt · 01-19-2006, 11:19 PM

Right on 84LX. Ford was crazy for doing that. You talk about wakeing up a stock enigne, thatll get it done. Iam getting ready to put a 69 429 timeing set into an 84 model 460.

01-19-2006, 04:24 PM	#1
69bronco Registered Member Join Date: Jan 2006 Location: New Carlisle, IN Posts: 48	timing chain hey where is the best place to find a timing chain and gears,Cheap, for a 360 fe ford engine. www.summitracing.com has a set up for $20, anyplace better? thanks __________________ Jack 1969 Bronco, 351 cleveland 1972 Bronco, 351 Cleveland

01-19-2006, 05:02 PM	#2
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	Re: timing chain $20 sounds like a good price. When i had my '84 5.0L the timing chain jumped at 150,000 miles and re-used the sprockets (worked fine) and just bought a new chain only. If the engine you have is a '71+ engine i would get a chain and also a crank sprocket since many ford engines had the crank sprocket retarded 4* for better emissions - the way you can tell if this is the case is when you've got the front cover off and have access to the sprocket see if the crank key-way (the thing that sticks up) is lined up with a dot on the crank sprocket. If it is and it doesn't look too worn i'd re-use it. If it's not aligned i'd get a '71 or earlier 360/390/428 crank sprocket - this would give you an extra 20-30 horsepower for a very small price. Just make sure that the teeth aren't worn and you should be fine with just replacing the chain. Good luck, __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

01-19-2006, 05:41 PM	#3
69bronco Registered Member Join Date: Jan 2006 Location: New Carlisle, IN Posts: 48	Re: timing chain thanks for the tip __________________ Jack 1969 Bronco, 351 cleveland 1972 Bronco, 351 Cleveland

01-19-2006, 11:19 PM	#4
grey88gt Registered Member Join Date: Feb 2004 Location: Skiatook, Oklahoma Posts: 193	Re: timing chain Right on 84LX. Ford was crazy for doing that. You talk about wakeing up a stock enigne, thatll get it done. Iam getting ready to put a 69 429 timeing set into an 84 model 460.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
leak from timing chain cover	GhettoPop	Windsor Power	10	03-11-2005 09:30 AM
Timing chain question	Red5Ltr	Windsor Power	2	06-30-2004 11:35 PM
timing chain.	fordkid68	Classic Mustangs	11	04-30-2003 01:10 PM
Timing Chain Cover	1tuff66	Classic Mustangs	2	04-24-2003 03:49 AM
timing chain or timing gear	mustang66teen	Classic Mustangs	11	06-18-2001 08:44 PM