What Should my car run?

slowride90 · 02-05-2001, 08:08 AM

I have a 90 LX 5.0 w/ 3:55, MSD Ing.&wires, Mac Shorty headers,Hedderman Offroad H-pipe,flowmaster 2 chamber mufflers, BBK Cold Air Induction, and the stock t.b. bored to a 65mm. Just want to know what it is cabable of.

93CobraR · 02-05-2001, 10:26 AM

high 13's on street tires and maybe mid 13's on slicks.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

slowride90 · 02-05-2001, 11:50 AM

Would it make a difference if I removed the front sway bar.

Jaydee · 02-05-2001, 01:49 PM

I have simular mod's on my 87 LX and it has run in the 13.80's with probably another tenth or two still left. Traction is the key - I picked up almost 4 tenths by bolting on a set of drag radials

------------------
1965 K code coupe - numbers matching - restoration ongoing. 1987 LX notch, stock heads and intake, 3.55's and typical bolt on's 13.89@100.25

02-05-2001, 08:08 AM	#1 (permalink)
slowride90 Registered Member Join Date: Dec 2000 Location: Mendota Posts: 96	What Should my car run? I have a 90 LX 5.0 w/ 3:55, MSD Ing.&wires, Mac Shorty headers,Hedderman Offroad H-pipe,flowmaster 2 chamber mufflers, BBK Cold Air Induction, and the stock t.b. bored to a 65mm. Just want to know what it is cabable of.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

02-05-2001, 10:26 AM	#2 (permalink)
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,574	high 13's on street tires and maybe mid 13's on slicks. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

02-05-2001, 11:50 AM	#3 (permalink)
slowride90 Registered Member Join Date: Dec 2000 Location: Mendota Posts: 96	Would it make a difference if I removed the front sway bar.

02-05-2001, 01:49 PM	#4 (permalink)
Jaydee Registered Member Join Date: Sep 2000 Location: Conn. Posts: 220	I have simular mod's on my 87 LX and it has run in the 13.80's with probably another tenth or two still left. Traction is the key - I picked up almost 4 tenths by bolting on a set of drag radials ------------------ 1965 K code coupe - numbers matching - restoration ongoing. 1987 LX notch, stock heads and intake, 3.55's and typical bolt on's 13.89@100.25

Sponsored Links