Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-17-2001, 08:52 PM
|
#1 |
|
Registered Member
Join Date: Jan 1999
Location: Oxford, KS
Posts: 935
|
What's your best guess???
O.K. guys and gals, I'm almost there as my motor is just about done. What's lacking? My oil pan. Canton has just about got it right (third time is a charm....I hope).
Anyway, with any luck this thing will be hitting the dyno Monday the 22nd. So, how much H.P. is this thing going to make? Read the scoop and then take your best guess! 417 c.i Windsor, SVO Yates heads: flowing 343/265 Compression 13.5:1 CAM: Solid roller- Duration:316int ,322exh. 278/282 at .50 Lift: Intake- 688 Exhaust- 672 Intake: SVO, ported Carb: Braswell Headers KOOK'S 2 1/4 with 4 inch collectors Rockers Jesel This will be done on an engine dyno so take a guess on the H.P. off of the motor alone. ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car |
|
|
|
01-17-2001, 09:19 PM
|
#2 |
|
Registered Member
Join Date: Oct 1999
Location: Pierre Part, La. U.S.A.
Posts: 1,850
|
613hp @ 6600rpm
------------------ Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac, 12.38 @ 111.28 1.80 60ft 28X10 street tires 12.17 @ 112 26 X 10 slicks http://www.mustangworks.com/mustangs...g347-slot3.jpg |
|
|
|
|
01-17-2001, 09:43 PM
|
#3 |
|
Huh? Whatcha said?
Join Date: Oct 2000
Location: Fayetteville, NC
Posts: 1,073
|
with out giggle gas, I'd say about 450 or so. With gas around 600, give or take. The more the better though. Good luck and I hope it breaks the dyno!!
|
|
|
|
|
01-18-2001, 02:25 AM
|
#4 |
|
Registered Member
Join Date: May 1999
Posts: 5,246
|
I'd be really suprised if the engine number wasn't well over 500 N/A. I'll guess 525hp N/A, I'm not sure what kind of N20 shot you're running, so I'll leave that blank.
|
|
|
|
|
01-18-2001, 02:49 AM
|
#5 |
|
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Providing adequate fuel and timing getting worked out right....
633@6800rpm Anything for the closet person? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft. On its way: Paxton Sn-89 with dyno tuning and long tubes. Just added: B&M Ripper, Weldin Subframes, & Turn downs! 13.2@106mph |
|
|
|
|
01-18-2001, 02:50 AM
|
#6 |
|
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
New Guess 598@6800rpm
Skyler |
|
|
|
|
01-18-2001, 04:14 AM
|
#7 |
|
Guest
Posts: n/a
|
|
|
|
|
01-18-2001, 05:26 AM
|
#8 |
|
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
I'll vote for an even 600 hp.
|
|
|
|
|
01-18-2001, 05:58 AM
|
#9 |
|
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
wow, i think you all are a little high. Ill go with 475 N/A.
------------------ 1993 GT/AOD '93 Mustang GT |
|
|
|
|
01-18-2001, 09:02 AM
|
#10 |
|
Registered Member
Join Date: Jan 1999
Location: Oxford, KS
Posts: 935
|
Skyman
I figured someone would ask that sooner or later!! How about a Mustang Works t-shirt to the closest guess without going over. Also, there will be NO nitrous pulls on the dyno. Good luck! ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car |
|
|
|
|
01-18-2001, 09:49 AM
|
#11 |
|
Guest
Posts: n/a
|
One dollar, one dollar...oh sorry that was The Price is Right. I'm gonna go extreme here, I would say 660hp.
[This message has been edited by 88GT5.013.02 (edited 01-18-2001).] |
|
|
|
01-18-2001, 12:30 PM
|
#12 |
|
It's been awhile, huh?
Join Date: Dec 2000
Location: I'm from Texas, Bitch!
Posts: 505
|
I'll say 575.
|
|
|
|
|
01-18-2001, 01:58 PM
|
#13 |
|
Registered Member
Join Date: Jan 1999
Location: Clayton, North Carolina, USA
Posts: 803
|
|
|
|
|
|
01-18-2001, 02:15 PM
|
#14 |
|
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
576@5800
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
|
|
|
|
01-18-2001, 03:16 PM
|
#15 |
|
or '331 LX Eric'
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
|
Given 13.5:1 comp, that size cam, and 417 cu. in. of big, bad, as$kickin' Ford Motor...I am going to guess 529 HP.
Good luck, Kevin! E ------------------ 1991 5.0 LX Coupe -37,800 miles 13.17 @ 106.14 mph w/ 2.138 60' Pro-Charger D-1SC on the way!!! |
|
|
|
|
01-18-2001, 03:40 PM
|
#16 |
|
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
I don't have an gram of experience or intelligence on this guess, but I want the T-shirt so I'll say 536HP @6000 RPM
|
|
|
|
|
01-18-2001, 04:49 PM
|
#17 |
|
STANGPOWER.COM
Join Date: Jun 1999
Location: Ontario, Canada
Posts: 1,045
|
600
Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded WANT XENON HEADLIGHTS AND WHITE FACE GAUGES? Visit my site: http://www.stangpower.com |
|
|
|
|
01-18-2001, 05:02 PM
|
#18 |
|
Registered Member
Join Date: Oct 2000
Location: Atlanta,GA,USA
Posts: 278
|
563.416623444 hp
------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback  |
|
|
|
|
01-18-2001, 05:39 PM
|
#19 |
|
Registered Member
Join Date: Oct 1999
Location: Cincinnati, Ohio
Posts: 1,575
|
I think the numbers are way off my self. That motor is alot like the combo they run in Winston Cup cause he's running Robert Yates heads. So those motors crank out about 700-800 Hp plus they have some rules that he probably doesn't. He also has more cubes, so I'm guessing 725hp@7500. Good luck man!
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html [This message has been edited by 93CobraR (edited 01-18-2001).] |
|
|
|
|
01-18-2001, 05:53 PM
|
#20 |
|
midnightruns.com
Join Date: Dec 2000
Location: Ottawa, Ontario, Canada
Posts: 584
|
My bet is 495HP@6250rpm or 354KW/6250rpm.
GIMMI DA T-SHIRT! ------------------ Lizard King - 00GT  >> 13.698 @ 101.2MPH - BONE STOCK, yes BONE(even air filter) stock. "I can do anything, I'm the Lizard King." - The Doors |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| hummm.....guess Civic's can't turn either | tireburner163 | Stang Stories | 1 | 06-11-2003 11:16 PM |
| i need your best guess..... | avbcon12 | Windsor Power | 28 | 02-18-2002 08:54 AM |
| Guess what happened at..... | mike_navigator | Blue Oval Lounge | 13 | 12-16-2001 12:55 AM |
| Finally Dyno'd my car! Anyone want to guess? | Stangrrr | Stang Stories | 23 | 10-30-2001 07:26 PM |
| Who will be in the front (guess guy's) ????!! | HAITHAM | Windsor Power | 3 | 05-06-2001 08:45 AM |