Quote:
Originally posted by xxxBlakexxx
This is what I would do:
C&L Plenum: $200
C&L Mass Air Kit: $300
70mm or 75mm Throttle Body: $200
Performance Chip (Diablo or similar): $225
Upgraded Shifter (like Steeda Tri-Ax):
|
a chip is the last mod that should be done on any car
mass air meters on a stock cars is a waste. the stock maf flows enough air to make 350 rwhp on a n/a car the only way these parts make power is by tricking the computer causing it to run lean the same can be had by a chip and a chip is the better way to go due to you can control how much it leans it out.
the only way I would go with a aftermarket maf is if I had the 5.0 stocker and p&p heads and cams (which is in the works) and it would never be a C&L it would only be a pro-m
gears cost 139 plus (5-speed)speed cal 89 plus install 200 total of
428
C&L plenum 189
steeda pullies 153
steeda t/a 125 all 3
www. crmotorsports.com
grand total of 895
which would still leace enough for a short throw shifter well if you add 75$
all in all you will gain about 16 rwhp and 20rwtq not bs infated numbers plus gears will put you in your power faster
if you into drag racing at all you will
drop .5-.6 in the 1/4 and pick up about 3mph
how do I know this I have these mods