5.4L swap
Do guys swap the 5.4L for there 4.6L as an upgrade?
|
Re: 5.4L swap
2 Attachment(s)
Well, in the event there is some interest, I will post a complete engine for sale here, and maybe the moderators can move it to the classified section because I can't seem to have access to post there.
5.4L 2V SOHC Ford Triton Modular V8 NEW & Complete, includes FI's, TB, intake & exhaust manifolds, haness, still in original plastic wrap: 1997 - '03 FORD TRUCKS VANS & SUV's 2&4WD. $3995 L.A. pick-up. |
Re: 5.4L swap
It's becoming a popular swap. I'm due to receive my new built 5.4 2v in a few days. If you're interested in actually offloading that motor, check out my sticky on mustangboards.com. Sorry to refer to another site but the thread is ~1700 posts long and has enough info to be useful.
http://www.mustangboards.com/modular...sted-5-4l.html |
Re: 5.4L swap
Quote:
Can't list a for sale item until 50 posts over there! If you know anyone who might be interested, could you pass on the info? Thanks |
Re: 5.4L swap
I think a 5.4 in a late model would rock. Im not real knowledgeable on the late model stuff, but didnt the Cobras come with 5.4?? Do the new Shelbys? They should stick that truck motor thats in the harley F150 into Mustangs, perhaps have a chance against the camaros LS2's when they come out. They should at least have the option of either the 4.6 or 5.4 in the GT imho.
|
Re: 5.4L swap
Quote:
4.6 is just too small for my taste. GM is up to 6.1 now. Seems when Ford wants to make serious power, they go to the 5.4. My '01 Lightning motor was great! |
Re: 5.4L swap
I bought a 5.4 s/charged out of a 2002 lightning it's going in my 2000 gt at the end of this month when I put it away.I paid $3800.00 usd on ebay.everything was included like the power steering pump alt and all brackets motor mounts etc all the plumbing for intercooler, tranni and torque convertor drive shaft (needed the front yoke)for mine.with a tune chandler tech in london Ontario thinks they can get 425hp out of it with 8lbs of boost.mines a daily driver.
|
Re: 5.4L swap
Quote:
Man that sounds sweet!!! Post up some pics when it done. |
Re: 5.4L swap
better get a big cowl hood and prepare to cut some holes in it. that motor is tall, but it will fit.
|
Re: 5.4L swap
Mine is done. Torque NA is unreal. Power is great. I highly recommend it to anyone. People that ride in my car compare the feeling to a 03/04 cobra. I think those pull harder up top and mine pulls harder in the mid range but who cares... it pulls hella hard no matter how you slice it.
The tuning has yet to be completed (I do my own tuning) but I'm putting on the new HPS 5.4 mustang intake and a set of new prototype longtubes before I get too far into tuning. The new intake will be released in 6-8 weeks and the headers shortly thereafter. HPS is making the intake, I can't specify who's making the headers but they're a major player in the aftermarket. For anyone interested, I have a 112 page thread on the subject: Anyone intrested in 5.4L swaps, in here. Need you to opine. - Page 112 - Mustang Forums and a site devoted to only swapping 5.4's into mustangs: http://330stangs.s10.forumsplace.com/ Feel free to check em out. You can see my car at Project TPS Reports Please no haranging about the low dyno output. It's tuned to bring out that little. No sense in turning the wick all the way up till the parts installs are complete. Longtube cars see 330-360rwhp and similar tq, shorty header cars see 250-300rwhp depending on the intake option. |
Re: 5.4L swap
Quote:
Anyone know of a good K member for me to buy? Remember I'm in Canada so taxes etc! (added in) Hey collinjay71 your in Regina!I use to live just north of saskatoon. |
Re: 5.4L swap
Only 2 that I'd ever recommend, Griggs or Maximum Motorsports. Realizing your tax situation, a UPR may do just as well for you but I'm a MM guy... nothing on the market is as strong as MM. I think it's worth the extra 50-100 bucks. Hey the US Dollar is down pretty far so you're at a good place on the foreign exchange right now to do it. If the dollar comes back it's only going to be more expensive.
|
Re: 5.4L swap
thank you,I should have said the/our federal sales tax at the border plus they add the brokerage fees on top but after they've added the tax on it first first. etc.I'm also keeping an eye for those long tube headers you mentioned.lol.
|
Re: 5.4L swap
me and like 20 other swappers are keeping sort of a running dialogue on those 2 links about our swaps. If you need help on anything, ping us over there. There are several experts.
I'll be keeping updates on new products on both of those sites. Check back often. |
Re: 5.4L swap
if anyone on here is looking for a direct-from-manufacturer 2008 twin-turbo 5.4L (custom built engine) mustang chassis with a full carbon fiber body kit there is a company offering these for direct order. the car is capable of 1070 RWP (that's right... you read that correctly) and is available in limited numbers. they've already begun taking orders, so feel free to check them out.
Welcome to the Great American Run, the Ultimate Bad Boy Car Rally Jason Duncan The Great American Run CRWE jtherealtor@hotmail.com (direct-to-cell) info@thegreatamericanrun.com Welcome to the Great American Run, the Ultimate Bad Boy Car Rally |
Re: 5.4L swap
I have a 3.8l v6 :mad: with dual roush exhaust and i am getting a 5.4l :D soon. i need to know what other items i need for this project to work. flywheel? posi-track and chip of course. manifold? springs? where can i find mounts?
|
Re: 5.4L swap
please see the link to my sticky at MB. You'll need a motor, trans, clutch&flywheel or flexplate&tc, 4.6 motor mounts, 8.8 rear, HPS 5.4L intake manifold, 4.6 oil pan & pickup tube, x/h pipe (modded), accessories, possibly a hydraboost & mc. Assorted other bite but those are the major assemblies.
|
All times are GMT -5. The time now is 11:15 PM. |