Stock 93 gt heads...

vheflin · 04-09-2002, 09:10 PM

Does anyone know the flow rate of the stock heads on a 93 gt?

Fostang · 04-10-2002, 07:20 PM

measurements in 28" of H2O

Intake
.100 .200 .300 .400 .500
55.4 101.3 140.9 150.8 164.6

Exhaust
.100 .200 .300 .400 .500
42 78.9 102.4 110.8 114.2

Hope this helps

vheflin · 04-10-2002, 11:57 PM

Thanks, This helps a great deal. I have been thinking about getting the 185cc ford street heads from air flow research. Have you heard anything regarding their performance with a stock camshaft, upper and lower intake?

I have the following mods installed:
· 80 mm Pro M mass air meter
· 75 mm throttle body
· 255 lph in tank fuel pump
· Anderson power pipe
· Kirban adjustable fuel pressure regulator
· Bosch 36 lb/hr fuel injectors
· Autologic computer chip
· Dynomax exhaust
. Mac full length headers
. Powerdyne 9 lb supercharger kit
. Centerforce dual friction clutch
. 3.73:1 gears

Fostang · 04-12-2002, 05:28 PM

I've never personally delt with that particular brand but I have heard lots of positive info from other members. Although I'm not too sure what would be the best type of head for your particular set up. I do agree that any aftermarket head will boost a fords anearobic performance. Even if you are using the stock cam and intake. I'm sure the super charged guys will help you out further

04-09-2002, 09:10 PM	#1
vheflin Registered Member Join Date: Feb 2002 Location: Virginia Posts: 11	Stock 93 gt heads... Does anyone know the flow rate of the stock heads on a 93 gt? __________________ 1993 Mustang GT ------------------------------ Mods: 80mm Pro-m mass air, 75mm Accufab TB, 36lb Bosch injectors, 255lph in tank fuel pump, Anderson power pipe, Kirban AFPR, Autologic chip, Powerdyne 9lb supercharger, Centerforce dual friction clutch, 3.73's, Dynomax superturbo mufflers, no cats, Mac shortys unequal length headers, B&M ripper shifter. MAC upper and lowers. ------------------------------------------ 301.0 RWHP 350.3 ft/lbs torque ------------------------------------------ Vince

04-10-2002, 07:20 PM	#2
Fostang Registered Member Join Date: Feb 2001 Location: Stockton, Ca Posts: 599	measurements in 28" of H2O Intake .100 .200 .300 .400 .500 55.4 101.3 140.9 150.8 164.6 Exhaust .100 .200 .300 .400 .500 42 78.9 102.4 110.8 114.2 Hope this helps __________________ 67' Fastback-Supercharged 4.6 DOHC Cobra, T-56, 8.8 more to come. 67' Coupe-EFI, AOD, 8.8 90 Gt-Supercharged,MAF,TB,1.7's ripper, bassani x, 3.55's, 01' cobras, headers. 89'GT-Supercharged,Heads,Cam,Intake,TB,MAF,power pipe,headers,offroad exhaust,black bullits.

04-10-2002, 11:57 PM	#3
vheflin Registered Member Join Date: Feb 2002 Location: Virginia Posts: 11	Thanks, This helps a great deal. I have been thinking about getting the 185cc ford street heads from air flow research. Have you heard anything regarding their performance with a stock camshaft, upper and lower intake? I have the following mods installed: · 80 mm Pro M mass air meter · 75 mm throttle body · 255 lph in tank fuel pump · Anderson power pipe · Kirban adjustable fuel pressure regulator · Bosch 36 lb/hr fuel injectors · Autologic computer chip · Dynomax exhaust . Mac full length headers . Powerdyne 9 lb supercharger kit . Centerforce dual friction clutch . 3.73:1 gears __________________ 1993 Mustang GT ------------------------------ Mods: 80mm Pro-m mass air, 75mm Accufab TB, 36lb Bosch injectors, 255lph in tank fuel pump, Anderson power pipe, Kirban AFPR, Autologic chip, Powerdyne 9lb supercharger, Centerforce dual friction clutch, 3.73's, Dynomax superturbo mufflers, no cats, Mac shortys unequal length headers, B&M ripper shifter. MAC upper and lowers. ------------------------------------------ 301.0 RWHP 350.3 ft/lbs torque ------------------------------------------ Vince

04-12-2002, 05:28 PM	#4
Fostang Registered Member Join Date: Feb 2001 Location: Stockton, Ca Posts: 599	I've never personally delt with that particular brand but I have heard lots of positive info from other members. Although I'm not too sure what would be the best type of head for your particular set up. I do agree that any aftermarket head will boost a fords anearobic performance. Even if you are using the stock cam and intake. I'm sure the super charged guys will help you out further __________________ 67' Fastback-Supercharged 4.6 DOHC Cobra, T-56, 8.8 more to come. 67' Coupe-EFI, AOD, 8.8 90 Gt-Supercharged,MAF,TB,1.7's ripper, bassani x, 3.55's, 01' cobras, headers. 89'GT-Supercharged,Heads,Cam,Intake,TB,MAF,power pipe,headers,offroad exhaust,black bullits.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1996 MUSTANG GT cylinder head's	mackz_69	Modular Madness	3	09-08-2004 01:27 PM
ported e7's?	bailey_57	Windsor Power	28	07-15-2004 07:54 PM
Used Heads On 98 GT	Titan	Modular Madness	5	08-13-2002 03:45 PM
Moroso results w/ stock 207K '87 GT	EZRIDN	Stang Stories	3	07-12-2001 03:58 PM
Best Heads For Stock Short Block	StreetStang37	Windsor Power	2	02-26-2001 11:10 AM