abs light on
 

Hi.03 mustang GT question.Since installing rims with slicks.They have alot alot of stick on lead wheel weights on the inside,when i make a hard run the abs light is coming on.Then i shut the car off it goes out.Until i run full throttle again.Are the exciters picking up on all the wheel weights? I didnt try my stock rims yet.UPDATE O.K.I just swapped the stock rims on..three full blast runs..no light turning on! :cool: Cool.Now its either the weights or the taller tires in the back.throwing the light on . :)

Re: abs light on
 

Yeah you said it. Its the taller tires in the back. The abs looks at all 4 wheels. A simple call to your ford dealer will tell you if taller tires will set off the abs light. Also for a chuck of $ they may be albe to adjust it to your tires so the light stays off and the abs still works. I would try spraying brake cleaner on the abs rings and make sure there is no metal flakes or brake dust causing the problem. Good luck.

Re: abs light on
 

Thanks for the help.I cleaned off the rings and the exciters. There was small shavings on them.The slicks are only going to be used once and a while.So im good then.Ill let more air out of them too.