Anyone with a MSD Dis4
 

I was wondering if any of you guys were running an MSD DIS 4 . WHere did you put it my engine bay is cramped enough. I'am thinking of putting on the tranny hump on the passenger side. or under the seat.Seems to be no good easy places to put it so you can get to it with out it being a pain.
Thanks for the help.

------------------
96GT riored w/silver stripes,
3.73s,C&L 80mm Maxflow kit
SVO 70mm TB,SVO alum quad
Aeromotive fuel regulator
Ram HD clutch,Nitto 275/40/17 NT555R's

i have the msd dis-4. i bought the mounting kit from msd for like $25, it mounts the msd box face up at the firewall. the box bolts to a metal sheet the bolts to the strut tower brace. it looks very nice. hope this helps, if you have any other questions about the msd email me at markymarc5@aol.com

------------------
97 Mustang GT Rio Red w/ tan leather
Nitto NT555extreme 255/45ZR17 on all fours
Steeda sport springs
Steeda caster/camber plates
Offset steering rack bushings

that's wierd, it only displayed half my sig. let's try this again.

------------------
97 Mustang GT Rio Red w/ tan leather
Nitto NT555extreme 255/45ZR17 on all fours
Steeda sport springs
Steeda caster/camber plates
Offset steering rack bushings

ok, this is strange, maybe third time is the charm.

------------------
97 Mustang GT Rio Red w/ tan leather
Nitto NT555extreme 255/45ZR17 on all fours
Steeda sport springs
Steeda caster/camber plates
Offset steering rack bushings

2cammer,
The signature limit has been reduced to 5 lines.
If you wish, you can add a link in your sig to your User's Rides page like mine...

------------------
"The Yellowjacket"
1998 Mustang GT
13.97@103
"Traction Impaired" or "Nitto Needy"
http://www.mustangworks.com/~hammer/bann.jpg

Is that unit available for the 99's?
Thanks for any help.

------------------
My Burnout ;-)
3.73 gears
Mac power chamber
2 chamber Flows
Mac cold air induction

Yes, I just purchased the DIS-4 for my 99 GT. I got mine from Excessive Motorsports (www.excessivemotorsports.com) for $319, which is about 20 bucks cheaper than most places. They have an ad in MM & FF.

I've heard some people complain that the MSD DIS 4 is prone to break. Have you guys had any trouble? And how long have you had yours?

Thanks.

Mine broke two days after I put it in it wouldn't go above 3 grand I thought the 2 step feature was grounded out but when you do ground it the motor would die. Also it seems like they would make the tach adapters a little smaller. Later