big as possible tire

LX XLR8R · 10-10-2002, 12:28 PM

this is for a 95..figure no quads and rolling the inside lip..i want to setup my new car for bfg dragz...is it possable to sqeeze some 345/55/15's under there..the measure in at 29.8" OD..next smaller is a 325/50/15 meansure in at 27.1" OD..i am pretty sure i wouldnt have a problem with that..o and i will have dumps so no tailpipe issues and i will get whatver size needed rim from Weld..thanks so much in advanced

incase you wonder why i neeed such a big tires is becasue it will be trying to tame over 400 cubes and over 500ftq

LX XLR8R · 10-10-2002, 05:56 PM

ok now im looking and big daddy only runs a 275/40/15 but he is pretty much all track..the 345 might be over kill

but id still like ot know what i can fit under there..

blue00gt · 10-10-2002, 08:54 PM

315 is about as big as you should go or it will start to stick out from the body and look a little funny. You'd be surprised - a wide tire doesn't help nearly as much as suspension work and practice.

10-10-2002, 12:28 PM	#1
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	big as possible tire this is for a 95..figure no quads and rolling the inside lip..i want to setup my new car for bfg dragz...is it possable to sqeeze some 345/55/15's under there..the measure in at 29.8" OD..next smaller is a 325/50/15 meansure in at 27.1" OD..i am pretty sure i wouldnt have a problem with that..o and i will have dumps so no tailpipe issues and i will get whatver size needed rim from Weld..thanks so much in advanced incase you wonder why i neeed such a big tires is becasue it will be trying to tame over 400 cubes and over 500ftq __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

10-10-2002, 05:56 PM	#2
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	ok now im looking and big daddy only runs a 275/40/15 but he is pretty much all track..the 345 might be over kill but id still like ot know what i can fit under there.. __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

10-10-2002, 08:54 PM	#3
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	315 is about as big as you should go or it will start to stick out from the body and look a little funny. You'd be surprised - a wide tire doesn't help nearly as much as suspension work and practice. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
16" Wheels 0n 67-68 - Tire Sizes?	Baxter	Classic Mustangs	3	12-23-2003 12:20 PM
cobra rear ---- need rim and tire advice please help	dragstang86	Windsor Power	0	07-27-2003 01:22 PM
new tire...have balanced again?	DemonGT	Windsor Power	3	04-29-2002 01:56 PM
Help with tire clearance issues!	2L8 ULUZ	Corner Carvers Delight	1	03-08-2000 05:07 PM