© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
05-11-2002, 06:47 AM | #1 |
Registered Member
Join Date: May 2002
Location: Wilmington, DE
Posts: 32
|
Bullit suspension
Does anyone know the type(brand) of springs that were used on the Bullitt? The car is only .75" lower than a stock GT, but the only springs I can find (Steeda,Saleen,Tokico), lower ther car 1-2". I know the shocks and struts are Tokico, but I'm not sure of the part number. Anyone know that info either?
This setup is the way I would like to go, I don't want the car too low or too stiff. (Heh, eh, eh heh, I said stiff!) wfd
__________________
2002 True Blue GT coupe Zaino, Zaino, Zaino!!! Career firefighter - IAFF local 1590 "Always keep the Brothers in mind" |
05-12-2002, 08:39 PM | #2 |
Registered Member
Join Date: Mar 2002
Location: Illinois
Posts: 44
|
springs
The bullitt springs were kinda of a joint effort in design with steeda, at least thats what a steeda rep told me. The kit lowered mine about 1" in front and 3/4" inback way better feeling ride the spring rates are pretty similar compared to the steeda sports( 625lbs/front and 225lbs/back I think). Like you I didn't want the slammed look, just better handling and slightly lowered, but still have the musclecar look to it, not rice. You can get the springs from Gene Evans Ford, www.GEFRacing.com. I got mine on the stangnet GP even though the GP was over. They only had like 15 sets( springs and shocks struts) and said that once those soldout they would have to raise their price because ford raised it. My set was like 340.00ish to my door.
__________________
2002 min gray GT: steeda underdrives, timing adjuster, triax, C&L maf, MM strut tower brace and k-member brace, Steeda subs weld-in, steeda tubular front sway bar, bullitt springs ,struts(tokico's)and shocks, bullitt gas door, alum.pedals, MM panhard Bar, cobra 13" front brake upgrade. ON THE WAY TO BECOMING A TRACK ***** 66' 2 dr malibu; 355 cube 4-bolt main, steel crank, chevy pink rods, KB 10.7 to1 pistons, ported double humps 202&160, torkerII intake, rejetted holley 650 D.P., crane ignition box, comp.cam roller rockers& 280 degree cam, balanced to 8500 rpm, hooker super comps, 3000 rpm stall and built turbo 350 tranny. dynoed at 543hp and 582 tq |
05-12-2002, 08:59 PM | #3 |
Registered Member
Join Date: May 2002
Location: Wilmington, DE
Posts: 32
|
Illini,
Thanks a lot for that link! wfd
__________________
2002 True Blue GT coupe Zaino, Zaino, Zaino!!! Career firefighter - IAFF local 1590 "Always keep the Brothers in mind" |
05-12-2002, 10:00 PM | #4 |
Registered Member
Join Date: May 2002
Location: Wilmington, DE
Posts: 32
|
Did you have to do anything else to the suspension? camber/caster? control arms?
wfd
__________________
2002 True Blue GT coupe Zaino, Zaino, Zaino!!! Career firefighter - IAFF local 1590 "Always keep the Brothers in mind" |
05-12-2002, 10:22 PM | #5 |
Registered Member
Join Date: Mar 2002
Location: Illinois
Posts: 44
|
not for sure yet
Everyone else that used this set up(springs) had enough caster camber for a street alignment. The really low springs are when you need the cc plates or when you autoX the cc plates are really helpful. I still haven't gotten mine aligned yet so I'll know then if I have enough caster camber, I should be OK though.
__________________
2002 min gray GT: steeda underdrives, timing adjuster, triax, C&L maf, MM strut tower brace and k-member brace, Steeda subs weld-in, steeda tubular front sway bar, bullitt springs ,struts(tokico's)and shocks, bullitt gas door, alum.pedals, MM panhard Bar, cobra 13" front brake upgrade. ON THE WAY TO BECOMING A TRACK ***** 66' 2 dr malibu; 355 cube 4-bolt main, steel crank, chevy pink rods, KB 10.7 to1 pistons, ported double humps 202&160, torkerII intake, rejetted holley 650 D.P., crane ignition box, comp.cam roller rockers& 280 degree cam, balanced to 8500 rpm, hooker super comps, 3000 rpm stall and built turbo 350 tranny. dynoed at 543hp and 582 tq |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1991 LX Suspension MODS | Chuck Boone | Windsor Power | 2 | 02-24-2003 08:25 AM |
street suspension | fastinturns | Corner Carvers Delight | 5 | 12-14-2001 08:59 PM |
Mustang suspension | Skankin | Corner Carvers Delight | 1 | 08-17-2001 05:10 PM |
SUSPENSION, SUSPENSION, SUSPENSION . PLEASE HELP! | BowTie Eater 5 Liter | Windsor Power | 11 | 02-03-2001 07:18 AM |
Suspension Choices? | tra9379 | Corner Carvers Delight | 1 | 12-20-1999 10:52 AM |