MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-24-2004, 10:45 AM   #1
chiaronate
Registered Member
 
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
Default c&l plenum

in addition to the pro-m meter, i also ordered a c&l plenum. someone in mm&ff said his car pulled like a freight train in 4th gear after he put that on. i'll let you guys know after i put the parts on. i'm guessing, based on a few articles testing maf and the plenum, i should get about 15 more horses at the wheels.
__________________
2000 mustang gt, silver with black interior and manual transmission

current performance mods:
80mm pro-m with filter
c&l plenum
mac 70mm throttle body
mac underdrive pulleys
pro 5.0 shifter
3.90 gears
dynomax super turbo mufflers
diablosport predator programmer

future performance mods:
x-pipe with converters
chiaronate is offline   Reply With Quote
Old 08-24-2004, 02:19 PM   #2
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

I thought it was TB and Plenum.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 08-24-2004, 02:28 PM   #3
chiaronate
Registered Member
 
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
Default

no man, i got both on e-bay at separate auctions.
__________________
2000 mustang gt, silver with black interior and manual transmission

current performance mods:
80mm pro-m with filter
c&l plenum
mac 70mm throttle body
mac underdrive pulleys
pro 5.0 shifter
3.90 gears
dynomax super turbo mufflers
diablosport predator programmer

future performance mods:
x-pipe with converters
chiaronate is offline   Reply With Quote
Old 08-24-2004, 03:44 PM   #4
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

sorry, The article I read was about TB and pelumn. My bad.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 08-24-2004, 04:24 PM   #5
XTCNAGT
Registered Member
 
XTCNAGT's Avatar
 
Join Date: Jan 2000
Location: Luna Pier, MI USA
Posts: 7
Default

I didn't do a before & after dyno test, but I did do a b&a test at the track.

Using stock plenum with a SVO 70mm tb.= 11.74@116.2
Same day, at the track, I switched to the CnL plenum and kept my 70mm tb.=11.74@117.9

So basically, my car gained almost 2mph. I'd say 15 rwhp is a realalistic figure.
XTCNAGT is offline   Reply With Quote
Old 08-24-2004, 07:16 PM   #6
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

As I recall, C&L's original claims of 25 hp for both TB and plenum are basically over-stated. The car mags (that advertise these things) reported 14 hp for both (rwhp). All the dynos that I have seen are more like 10 hp. BUT, and I mean a big BUT, I often question dyno numbers for ANY intake mod. Think about it. A dyno does not replicate high speed air flow of the car moving down the road/track.

I personally believe that the gains are more live 15 hp. I read the article in MM&FF that you speak of, and I have to agree with the comments. Add, 4.10's and an X-Pipe and hold on tight.

When my car was stock, it ran out of steam shortly over 5,000 rpms. Now, as modded, it feels like it could pull to 7,000 rpms.

I have a bud with a 2000 vert (as I do), 5 speed with exhaust mods only. My car can run circles around him up high. (He has 3.73's thoygh). Now he is trying to set his car up just like mine.

I can't wait to add cams and heads...that would be da zhit!
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
Old 08-24-2004, 09:15 PM   #7
DUKE
Registered Member
 
Join Date: Aug 2004
Posts: 1
Default c&l intake plenium

keep in mind the bullett intake netted 25 horsepower on a blown engine in steeda's Q , for just an upper plenium i would guess about 7 hp , no more than 12 with a blower. C&L is working on an intake manifold to match.
DUKE is offline   Reply With Quote
Old 08-25-2004, 08:43 AM   #8
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

Thing is he is talking about getting a new MAF and not a new Throttle body. Also blown cars with intake changes are far different than stock cars with intake changes.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 08-25-2004, 12:29 PM   #9
chiaronate
Registered Member
 
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
Default

yeah, what godstang said. i'm getting an 80mm pro-m mass-air meter and a c&l plenum. would the pro-m work well with my rubber air hose, or should i get the true-flow pipe.
__________________
2000 mustang gt, silver with black interior and manual transmission

current performance mods:
80mm pro-m with filter
c&l plenum
mac 70mm throttle body
mac underdrive pulleys
pro 5.0 shifter
3.90 gears
dynomax super turbo mufflers
diablosport predator programmer

future performance mods:
x-pipe with converters
chiaronate is offline   Reply With Quote
Old 08-26-2004, 02:54 PM   #10
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by chiaronate
yeah, what godstang said. i'm getting an 80mm pro-m mass-air meter and a c&l plenum. would the pro-m work well with my rubber air hose, or should i get the true-flow pipe.
I hate to tell you this but on a 99+ mod motor we already have a 80mm maf unlike on the 5.0s
putting a maf on a stock car will net maybe 2 hp cause it will lean it out and thats it.
plus dont take the numbers the magazines get as dead on cause they do bend the truth a lot
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 08-27-2004, 10:48 AM   #11
chiaronate
Registered Member
 
Join Date: Jul 2002
Location: watervliet, ny
Posts: 105
Default

i realize this, but the factory meter has a big post across it that blocks airflow. not to mention the screen also.
__________________
2000 mustang gt, silver with black interior and manual transmission

current performance mods:
80mm pro-m with filter
c&l plenum
mac 70mm throttle body
mac underdrive pulleys
pro 5.0 shifter
3.90 gears
dynomax super turbo mufflers
diablosport predator programmer

future performance mods:
x-pipe with converters
chiaronate is offline   Reply With Quote
Old 08-27-2004, 01:37 PM   #12
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by chiaronate
i realize this, but the factory meter has a big post across it that blocks airflow. not to mention the screen also.
they are both there for a reason

the screemn is to straighten the airflow going over the wires in the meter

the big thing is the transfer fun. of a meter and if its not setup right(not the sample tube) it will cause a major lean condition


you have no where near the mods to even need one the stock maf are good for over 350 rwhp n/a before the need comes to up it heres a list I have with out a maf
(power/acc mods)
steeda u/d pullies
steeda t/a (set at stock)
afm powerstack filter)
densecharger maf-t/b tube
70mm t/b
c&l plenum
mac long tube headers
bbk h-pipe
dumped magnaflow headers
sct chip
4.10 gears

and thats it(minus the nx 100 shot that has not been used yet)

\and I put down on the dyno
265@5100 rwhp 307@4700 rwtq

and my buddy with a 03 with everything I have plus 4.30 gears instead of the 4.10s and a 80mm pro-m
and he put down

264@5100 rwhp and 301 @4700 rwtq on the same dyno same day only about 10 mins apart
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 08-28-2004, 07:42 PM   #13
smokinsteeda
Registered Member
 
Join Date: Jul 2004
Location: miami
Posts: 3
Default

eplicitone- that's all you put down i figured you woild be at least around 285 with that chip and exhaust alone. What kind of program are you running and do you still have your cat's. what kind of times do you run with that 100 shot
__________________
my ride: 01 mustang gt, steeda stage 3 package(need i say more), vortech sq-blower, 55 lb injectors, 3.73 gears, suspension mods, exhaust. . etc
smokinsteeda is offline   Reply With Quote
Old 08-28-2004, 09:03 PM   #14
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by smokinsteeda
eplicitone- that's all you put down i figured you woild be at least around 285 with that chip and exhaust alone. What kind of program are you running and do you still have your cat's. what kind of times do you run with that 100 shot
your joking right!!

stock a 00GT will put 225 to the wheels(260 flywheel)

265 thats at the wheels flywheel that comes to over 309

you must not take what the mags or the adds say as truth, most with cams and a dyno tune only put down 280-290 without ported heads and bullit manifold

and as for my 100 shot times
I have not used it yet cause im stll leaving a lot on the table with my n/a set up once I get the 60' where I want them then I will start spraying

should run high-mid 11s on drag radials (once I get traction down)
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 08-28-2004, 09:39 PM   #15
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

You make me laugh. Your times are awsome for what you have done to the car. I was only able to muster a pathetic 14.3 with a 2.0x 60 foot last night in my heavy vert (first time at the track). Altitude at the track is about 600 feet, it was over 80 degrees and 94% humidity. I am sure the weather was not ideal. Corrected, my times were still only 13.9 though. I should be running much better with my mods. I would love to have you drive me car to see what you could get out of it.

Still, though. I ran better than every other mustang except one guy who ran 13.5's all night. Don't know what he had done under the hood. Saw a 96 ish GT run over 16.
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
Old 08-29-2004, 07:25 AM   #16
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by xxxBlakexxx
You make me laugh. Your times are awsome for what you have done to the car. I was only able to muster a pathetic 14.3 with a 2.0x 60 foot last night in my heavy vert (first time at the track). Altitude at the track is about 600 feet, it was over 80 degrees and 94% humidity. I am sure the weather was not ideal. Corrected, my times were still only 13.9 though. I should be running much better with my mods. I would love to have you drive me car to see what you could get out of it.

Still, though. I ran better than every other mustang except one guy who ran 13.5's all night. Don't know what he had done under the hood. Saw a 96 ish GT run over 16.
my car has some weight taken out

removed front and rear sway bars

weld draglites all around

no rear wing
nothing in trunk (spare,jack carpet,plastic panels)

plus I drive it like im trying to break it

the mods I listed were the power mods i have some susp mods

susp
--------
mm sub frame conn.
D&D upper/lower control arms
4 cly front springs
lakewood 90/10 struts
D&D spy. bearing(housing side)

drivetrain
--------------
moser 33 spline spool + axles
al. driveshaft


plans before the end of the year
-----------------------------------------------
replace nittos with the new mickey tompson drag radials
delete a/c
delete rear seat
p/a racing tubed k-member,a-arms and coil overs, racing seats

plans for over the winter
---------------------------------------
stage 2 n/a vt cams
comp cams valve springs
ported heads(vt stage 2)
c&l lower maniflod (if it ever comes out)
svt focus fuel pump
24 lb injectors(tuned by sct chip so I can use the stock meter)
6 point roll bar
tko 500 trans
11lb al. flywheel
stage 3 ram power grip clutch

goal high 11s on motor/low 11s high 10s on spray
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Full dyno testing on the C&L Plenum, 75mm TB, C&L MAF 91LX2Bfast Modular Madness 4 01-23-2004 07:09 PM
70 mm Throttlebody / C&L Intake Plenum and New Gauges SleeperGT Modular Madness 1 12-14-2003 09:41 PM
Got my c&l plenum!! I'll try to run tests on a 96gt, worth getting a 70mm TB now?? 96_4.6 Modular Madness 7 10-24-2003 09:30 PM
C&L plenum explicitone Modular Madness 4 10-21-2003 04:12 PM
C&L 's New Intake Plenum xxxBlakexxx Modular Madness 15 10-16-2003 10:26 PM


All times are GMT -5. The time now is 05:25 AM.


SEARCH