MustangWorks.com - The Ford Mustang Power Source!

Go Back   The Mustang Message Board > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 07-26-2002, 08:22 PM   #1 (permalink)
scott armstrong
Registered Member
 
Join Date: Jul 2002
Location: rockford,il
Posts: 3
Default check engine light

about four months ago i installed a bassani hi-flow x pipe with cats on my 99 mustang gt. i have put on about 3500 miles since then and until two weeks ago had no problems. then the service engine soon light came on. i had the code scanned ( autozone does it for free,while ford wanted $97) it gave a 420 and 430. the codes stand for catalyst effiencey below threshold right side and left. Knowing that 96 and newer cars are very sensitive to exhaust mods, i purchased a set of MIL eliminators, however after installing them the light came back on two days later. the only thing that i can think of that could have caused this was the fact that a couple of days before the light orignally came on, i had filled up and added a can of STP total fuel system cleaner. has anyone else experianced a problem like this? does anyone have a suggestion on how to go about this??

thankx, scott
scott armstrong is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-29-2002, 10:10 PM   #2 (permalink)
Nazman
Registered Member
 
Nazman's Avatar
 
Join Date: May 2002
Location: Darmstadt, Germany
Posts: 19
Default Re: check engine light

Quote:
Originally posted by scott armstrong
about four months ago i installed a bassani hi-flow x pipe with cats on my 99 mustang gt. i have put on about 3500 miles since then and until two weeks ago had no problems. then the service engine soon light came on. i had the code scanned ( autozone does it for free,while ford wanted $97) it gave a 420 and 430. the codes stand for catalyst effiencey below threshold right side and left. Knowing that 96 and newer cars are very sensitive to exhaust mods, i purchased a set of MIL eliminators, however after installing them the light came back on two days later. the only thing that i can think of that could have caused this was the fact that a couple of days before the light orignally came on, i had filled up and added a can of STP total fuel system cleaner. has anyone else experianced a problem like this? does anyone have a suggestion on how to go about this??

thankx, scott
Scott,

the very basic first:

Did you checked that the MILS were installed in the REAR O2 connetions.
Did you crossed the wires? They are expecific to each O2.
Is that STP O2 and Cat safe?
Did you reset the computer (un-plug batt for about 10 minutes) and installed with the batt diconnected?

Let me know.

Naz
__________________
S&B Filter, 95mm Pro-M MAF, WMS Velocity Tube & CAI, Ported Intake, PHP Intake Spacer, FR-500 Heads, FR500 Cams, SHM Billet Oil Pump Gears, Accufab Billet Timing Wheel, Meziere EPW, SLP LT Headers, SLP X-Pipe, SLP Cat-Back, Aluminum FW, SPEC Stage II & Light Weight PS, FMS Aluminum DS, D&D U/L CA, 4.30 Gears, Steeda U/D Pulleys, Steeda Tri-Ax Shifter, SCT Flasher, Brembo Slotted Rotors, SBS Ceramic Pads, Moroso 7 Qt. Strip/Street Pan, and a bunch more! Sponsored by SLP
Nazman is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
check engine light bubbalink Windsor Power 3 07-30-2004 04:44 PM
Check engine light on a 2000 GT GITY UUP Modular Madness 11 04-30-2002 11:16 AM
New Guy w/ Check Engine light? Stang_ROTY Modular Madness 7 06-18-2001 12:34 PM
Turning Off "Check Engine" Light King Snake Modular Madness 3 04-01-2001 08:18 PM
Check Engine Light? Maxi 5.0 Windsor Power 3 01-09-2001 10:50 PM


All times are GMT -5. The time now is 05:03 AM.


SEARCH