Electric water pumps (CSI vs. Meziere vs. Aerospace)

ultraflo · 03-24-2002, 07:42 PM

It's been awhile since I've posted, anyhow...

I am going to purchase an elec. water pump soon and wanted to know if anyone had any input; that is, does anyone run the CSI, Meziere, or Aerospace Components?

I'm actually torn between the CSI and the Meziere, is one any better that the other? Your opinions are greatly appreciated!

WADS56 · 03-25-2002, 12:36 AM

I have the CSI and have had no problems. It has seen a few 100 mile trips and never missed a beat.

ultraflo · 03-27-2002, 01:40 AM

Thanks for the reply!

I decided on the Meziere. Bennett racing sold me the pump, billet water neck, and inlet for 300bills.

I also purchased a Danny Bee belt drive setup, should be pretty trick!!!

WADS56 · 03-27-2002, 01:52 AM

The Danny Bee's are a cool setup. Last time I checked they were over $500.00

I wish I had one. You can advance and retard the cam in minutes with that thing.

ultraflo · 03-27-2002, 01:56 AM

jeg's list them for 750

Bennett bargained a little at 729

Still, yeah $$$

I plan to change that over to my bare R302 block if I ever get around to buying a rotating assem. I havent even gotten my act together on what I go now!!

03-24-2002, 07:42 PM	#1
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	Electric water pumps (CSI vs. Meziere vs. Aerospace) It's been awhile since I've posted, anyhow... I am going to purchase an elec. water pump soon and wanted to know if anyone had any input; that is, does anyone run the CSI, Meziere, or Aerospace Components? I'm actually torn between the CSI and the Meziere, is one any better that the other? Your opinions are greatly appreciated! __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

03-25-2002, 12:36 AM	#2
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I have the CSI and have had no problems. It has seen a few 100 mile trips and never missed a beat. __________________ 79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49

03-27-2002, 01:40 AM	#3
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	Thanks for the reply! I decided on the Meziere. Bennett racing sold me the pump, billet water neck, and inlet for 300bills. I also purchased a Danny Bee belt drive setup, should be pretty trick!!! __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

03-27-2002, 01:52 AM	#4
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	The Danny Bee's are a cool setup. Last time I checked they were over $500.00 I wish I had one. You can advance and retard the cam in minutes with that thing. __________________ 79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49

03-27-2002, 01:56 AM	#5
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	jeg's list them for 750 Bennett bargained a little at 729 Still, yeah $$$ I plan to change that over to my bare R302 block if I ever get around to buying a rotating assem. I havent even gotten my act together on what I go now!! __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Electric water pump. Any problem w/ U/D pulleys?	esandes	Modular Madness	4	10-15-2002 09:58 AM
electric water pumps	88workcar	Windsor Power	2	09-22-2002 03:42 PM
Free Horsepower, but at what cost??	71grande	Classic Mustangs	13	09-21-2002 05:07 PM
HP gains from electric water pump?	exgmguy	Windsor Power	13	09-28-2001 02:46 AM
need help with csi electric water pump	Mustangboy89	Windsor Power	2	03-09-2001 05:34 PM