MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-25-2002, 02:36 PM   #1
faststang90
Registered Member
 
Join Date: May 2001
Location: baytown,tx,us
Posts: 128
Default fastest 4.6 with just bolt ons

i have a friend with a 02 gt it has a gear, a cold air kit long tubes and exhaust i think he has a chip too ( but not sure ) his car is running a 12.74 @ 106 has any 1 gone faster with just bolt ons
im thinking about getting a new 1 has any 1 ported heads and do they make cams for these 4.6s
faststang90 is offline   Reply With Quote
Old 02-25-2002, 02:56 PM   #2
Mustang92
Drag Racer!
 
Mustang92's Avatar
 
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
Default

I've heard of one guy running 12.6 @ 108 NA with a stock long block but honestly I don't know how much truth there is to that. Otherwise I would say most are in the 12.8 to 12.9 range with bolt-ons and some with ported heads, cams, etc... My best is with just bolt-ons and prior to the intake, now the car with the intake a tune should be a little quicker. Of course it would be nice to run in some decent air for once. My times usually correct to 12.6 to 12.7 @ 105.

Bill
__________________
2000 GT
VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune.
285 RWHP/296 RWTQ
11.97 @ 113.20
M/M 100, 7085

www.uprproducts.com
www.ponyexpressperformance.com
www.modulardepot.com
Mustang92 is offline   Reply With Quote
Old 02-25-2002, 03:46 PM   #3
StoplightWarrior
Registered Member
 
Join Date: Jun 2000
Location: Nor-Cal
Posts: 1,311
Default

Yeah, Bill's pretty fast, but I've gotta be the quickest. Check my sig:
__________________
Black 2000 GT Auto
V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc...
341rwhp, 338 torque

1994 Cobra #4343
Bolt on's only...

Cofounder of Raccoon Racing
StoplightWarrior is offline   Reply With Quote
Old 02-26-2002, 03:59 AM   #4
Mercury
The Redneck James Bond
 
Mercury's Avatar
 
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
Default

Thats a good one StopLight Warrior.

I like the seat belt fluid..How much power did that one add?
__________________
64 1/2 "D" code Red Mustang Coupe.
Red Baron,

2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars.

Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.
Mercury is offline   Reply With Quote
Old 02-26-2002, 09:49 AM   #5
SLOW 97
Registered Member
 
SLOW 97's Avatar
 
Join Date: Feb 2002
Location: Arlington Heights,IL
Posts: 231
Default

If you change your muffler bearings and add some stickers you'll maybe hit low 11's!!!
__________________
'97 Laser Red GT Coupe
Stock 2V (Pulled Silencer)
4R70W Automatic
Ripped off a BLISTERING 15.37@90MPH
With a 2.21 60ft
Just Installed- K&N Air Filter
Coming Soon......
-4.10's
-Flowmaster A/T or Magnapack Cat-Back
SLOW 97 is offline   Reply With Quote
Old 02-26-2002, 01:25 PM   #6
Snakeman
Registered Member
 
Snakeman's Avatar
 
Join Date: Apr 1999
Location: Grass Valley, CA, USA
Posts: 1,389
Default *POP*

there's that bubble bursting...

would you believe 10.45 @ 131 mph?
see the article in the 1/02 5.0 magazine entitled urban legend
__________________
LX ~vs~ Camaro
Snakeman is offline   Reply With Quote
Old 02-26-2002, 02:34 PM   #7
StoplightWarrior
Registered Member
 
Join Date: Jun 2000
Location: Nor-Cal
Posts: 1,311
Default

Quote:
Originally posted by Mercury
Thats a good one StopLight Warrior.

I like the seat belt fluid..How much power did that one add?

With just the spoiler and seatbelt fluid I dropped 9 tenths off my ET. This weekend I'm putting some Headlight Knob and power seat fluid in, then I'll update my sig.
__________________
Black 2000 GT Auto
V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc...
341rwhp, 338 torque

1994 Cobra #4343
Bolt on's only...

Cofounder of Raccoon Racing
StoplightWarrior is offline   Reply With Quote
Old 03-08-2002, 03:46 PM   #8
98SteedaGT
Registered Member
 
98SteedaGT's Avatar
 
Join Date: Jan 2002
Location: Texas
Posts: 330
Talking Better Power Upper....

Did you know if you put a flowmaster sticker on your side windows you get 100+ HP from it, and if you put one on the other side, you can get your car into the 9's. No kiding. I read an article on the web about it, so you know it must be true... hehe

Also, I like the idea about the seatbelt lube. what kind of oil was that again???wasn't made from bull droppings was it?
98SteedaGT is offline   Reply With Quote
Old 03-08-2002, 03:53 PM   #9
StoplightWarrior
Registered Member
 
Join Date: Jun 2000
Location: Nor-Cal
Posts: 1,311
Default Re: Better Power Upper....

Quote:
Originally posted by 98SteedaGT

Also, I like the idea about the seatbelt lube. what kind of oil was that again???wasn't made from bull droppings was it?
No, it's actually a mixture of Water, Dial soap, and KY Jelly. Works wonders.
__________________
Black 2000 GT Auto
V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc...
341rwhp, 338 torque

1994 Cobra #4343
Bolt on's only...

Cofounder of Raccoon Racing
StoplightWarrior is offline   Reply With Quote
Old 03-13-2002, 12:43 AM   #10
NOSstang08690
Registered Member
 
NOSstang08690's Avatar
 
Join Date: Mar 2002
Location: Hamilton, NJ
Posts: 46
Default

The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster
NOSstang08690 is offline   Reply With Quote
Old 03-13-2002, 01:53 AM   #11
Mercury
The Redneck James Bond
 
Mercury's Avatar
 
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
Default

I'm not sure if Nitrouis is considered a Bolt on. I think that falls under the category Power Adder, like Super Charger, and Turbo.
__________________
64 1/2 "D" code Red Mustang Coupe.
Red Baron,

2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars.

Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod.
Mercury is offline   Reply With Quote
Old 03-13-2002, 08:40 AM   #12
Mustang92
Drag Racer!
 
Mustang92's Avatar
 
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
Default

Quote:
Originally posted by NOSstang08690
The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster
Nitrous is a power adder not a bolt-on were talking all motor here. Leo Sturm has gone 11.9 @ 117 with his 98 GT with a 2000 motor, bolt-ons and nitrous as well.

Bill
__________________
2000 GT
VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune.
285 RWHP/296 RWTQ
11.97 @ 113.20
M/M 100, 7085

www.uprproducts.com
www.ponyexpressperformance.com
www.modulardepot.com
Mustang92 is offline   Reply With Quote
Old 03-13-2002, 10:25 AM   #13
95mustanggt
Registered Member
 
95mustanggt's Avatar
 
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
Default

Quote:
Originally posted by StoplightWarrior
Yeah, Bill's pretty fast, but I've gotta be the quickest. Check my sig:
That is pretty quick but I know a guy who ran 12.3@109 in reverse!

But he filled his car with helium to make it lighter.
__________________
1995 Mustang GT

20016 F150 Lariat Super Crew
95mustanggt is offline   Reply With Quote
Old 03-13-2002, 03:18 PM   #14
StoplightWarrior
Registered Member
 
Join Date: Jun 2000
Location: Nor-Cal
Posts: 1,311
Default

Quote:
Originally posted by 95mustanggt


That is pretty quick but I know a guy who ran 12.3@109 in reverse!

But he filled his car with helium to make it lighter.
Of course, Helium, how'd we miss that!!
__________________
Black 2000 GT Auto
V2-SQ, Full Steeda G-trac Suspension, Baer Brakes, Saleen Body Kit, Corbeau CR1s, Chrome Cobra R's, etc, etc...
341rwhp, 338 torque

1994 Cobra #4343
Bolt on's only...

Cofounder of Raccoon Racing
StoplightWarrior is offline   Reply With Quote
Old 08-24-2008, 03:50 AM   #15
cuttincircles
Registered Member
 
Join Date: Aug 2008
Posts: 1
Default Re: fastest 4.6 with just bolt ons

Quote:
Originally Posted by NOSstang08690 View Post
The fastest 4.6 with just boltons, 1997 Mustang GT with just exhaust and Nitrous and Gears this car runs

12.4 at 108 mph

have not found a modular GT with just boltons that is faster

I have a '96 with an '02 engine, longtubes, K&N CAI, runs 12.24-28 consistently with the best a 12.22@109
cuttincircles is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem, Bolt Removal KrivoK Classic Mustangs 2 12-19-2003 07:26 AM
Ideas on removing a stubborn bolt? Evil Joe Windsor Power 6 07-02-2003 07:59 PM
Control Arm bolt from hell PeTr0 Windsor Power 4 03-21-2003 03:04 AM
Broke bolt in new head (Kinda Long) 1988GTCONERTIBLE Windsor Power 6 05-12-2002 02:00 PM
Bolt problem DaTank Windsor Power 1 08-27-2001 03:28 PM


All times are GMT -5. The time now is 08:32 PM.


SEARCH