It's not hard really. If you open your hood and stand infront of car look down to your left. Next to where aircleaner would be you will see the ABS pump by the radiator. The Proportioning valve is right under your master cylinder, locate line between the two for front brakes. Each port will be marked to where they lead to or come from. You may need a short piece of brake line to run from out side of linelock to say ABS pump that way you dont cut and splice lines which can blow out after splicing. Then its just a matter of bleeding front brake lines and hooking wires up to a switch somewhere inside car. It will take me longer to run wires then to hook up linelock to brake line. Now I have my project for saterday
[This message has been edited by Ares (edited 02-20-2001).]