Pullys

Badass_yellowGT · 08-22-2002, 01:02 PM

when i bought my car the owner said it had ford racing pullys on it but after looking at some stock engines they look the same is there a way to tell if they are ford under drive pullys if not i need to buy some quick and does anybody have pics of the original pulleys from a 98 gt

blue00gt · 08-22-2002, 03:12 PM

If you have a car with stock pullies to compare with, you can just compare the diameters. For underdrives, crank pulley should be smaller and the other two pullies should be larger than stock.

98SteedaGT · 08-22-2002, 03:44 PM

I think I might still have my stock 1998 pulleys laying around somewhere... I will look when I get home. If I find them I will snapshot them and give you the measurements, and load the pics to my webserver at the house..

Badass_yellowGT · 08-22-2002, 05:20 PM

thanks

98SteedaGT · 08-22-2002, 09:31 PM

Here you go. I hope this helps you.

http://www.superrobots.net/pulleys.htm

Badass_yellowGT · 08-23-2002, 05:59 PM

damn that good i gues i have the underdrive pulleys because mine are smaller on the crank nad it is a piggyback system either way i have to buy a new crank pulley so i can get the steeda timing adjuster

thanks

98SteedaGT · 08-23-2002, 06:09 PM

I take it you got the info you were after... Sorry to hear about it being one of those types, I like the kind that are combined damper/pulley. I would recommend that you get the Steeda Underdrives, they are about the only ones that will work with their TA system, and I don't know that they sell the pulleys indiviually or not. I think Steeda lists all the pulleys that are compatible with their TA system. If you don't need the info anymore, I will take down the page, as I have no need for it anymore.

08-22-2002, 01:02 PM	#1
Badass_yellowGT Registered Member Join Date: Jun 2002 Location: Western,MA Posts: 254	Pullys when i bought my car the owner said it had ford racing pullys on it but after looking at some stock engines they look the same is there a way to tell if they are ford under drive pullys if not i need to buy some quick and does anybody have pics of the original pulleys from a 98 gt __________________ Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/

08-22-2002, 03:12 PM	#2
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	If you have a car with stock pullies to compare with, you can just compare the diameters. For underdrives, crank pulley should be smaller and the other two pullies should be larger than stock. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

08-22-2002, 03:44 PM	#3
98SteedaGT Registered Member Join Date: Jan 2002 Location: Texas Posts: 330	I think I might still have my stock 1998 pulleys laying around somewhere... I will look when I get home. If I find them I will snapshot them and give you the measurements, and load the pics to my webserver at the house.. __________________ // 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\

08-22-2002, 05:20 PM	#4
Badass_yellowGT Registered Member Join Date: Jun 2002 Location: Western,MA Posts: 254	thanks __________________ Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/

08-22-2002, 09:31 PM	#5
98SteedaGT Registered Member Join Date: Jan 2002 Location: Texas Posts: 330	Here you go. I hope this helps you. http://www.superrobots.net/pulleys.htm __________________ // 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\

08-23-2002, 05:59 PM	#6
Badass_yellowGT Registered Member Join Date: Jun 2002 Location: Western,MA Posts: 254	damn that good i gues i have the underdrive pulleys because mine are smaller on the crank nad it is a piggyback system either way i have to buy a new crank pulley so i can get the steeda timing adjuster thanks __________________ Rice Haters Club Member #55 For My car Specs Click the Home page link http://www.badassyellowgt.50g.com/

08-23-2002, 06:09 PM	#7
98SteedaGT Registered Member Join Date: Jan 2002 Location: Texas Posts: 330	I take it you got the info you were after... Sorry to hear about it being one of those types, I like the kind that are combined damper/pulley. I would recommend that you get the Steeda Underdrives, they are about the only ones that will work with their TA system, and I don't know that they sell the pulleys indiviually or not. I think Steeda lists all the pulleys that are compatible with their TA system. If you don't need the info anymore, I will take down the page, as I have no need for it anymore. __________________ // 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How much HP will I get out of Mac Underdrive Pullys	steedamustang01	Modular Madness	6	03-27-2002 08:37 PM
Ive heard that pullys will mess up am oem alternator, is it true?	zepherman	Windsor Power	3	11-06-2001 05:27 PM