MustangWorks.com : Ford Forums - View Single Post - How to remove rear seat in 01' Mustang GT???????

stylin99 · 03-29-2002, 12:24 PM

The bottom piece is only worth 12 lbs. The rear seat backs and frame are worth 26lb and the piece over the rear seat frame is worth 4lb. Your best bet is to remove it all and build a rear seat delete kit, basically a piece of cloth or a lite weight board or both to replace it for looks. The rear seat backs come off with 4 or 5 screws I think. Once you remove the seat bottom as described above, there are 2 bolts on each corner at the bottom of the frame. Remove the upper bolts and it falls right off.

03-29-2002, 12:24 PM	#4
stylin99 Registered Member Join Date: Mar 2002 Location: charlotte, NC Posts: 11	The bottom piece is only worth 12 lbs. The rear seat backs and frame are worth 26lb and the piece over the rear seat frame is worth 4lb. Your best bet is to remove it all and build a rear seat delete kit, basically a piece of cloth or a lite weight board or both to replace it for looks. The rear seat backs come off with 4 or 5 screws I think. Once you remove the seat bottom as described above, there are 2 bolts on each corner at the bottom of the frame. Remove the upper bolts and it falls right off. __________________ Steve Shrader '99 Chrome Yellow GT (Steeda Clone) SAE dyno: 337hp/452tq 1/4mi - on street tires: 12.88 @ 111mph[b] UNnaturally aspirated Modifications: 100 shot Nitrous (wet), 3.73s, Prochamber, Flowmasters, Mac CAI, Pro50 Shifter, SPEC Stage2 Clutch & Flywheel, Steeda Pulleys, 17" Ultralights, Steeda Hood, Sport Springs, & STB, Tokico 5way Shocks/Struts, UPR trunk mounted Battery Box, Aluminum Driveshaft, Steeda Sidewinder graphics, Billet Grill, brushed aluminum dash kit, Custom Rear Seat Delete kit, Autometer dual 'A' pillar gauge pod w/nitrous gauge & fuel press gauge,SS Bumper inserts, MGW interior accessories, sequential turn signals, & more.