Idle Problem on a 2000 4.6
 

Hey all, yeah i'm new but i also just got an idle problem with my GT, it seems when ever i'm in nuetral it drops to about 100-50 RPMs and seems like its gonna die out I read it may be the IAC and i just need to clean it, but i've also heard that Cleaning it can mess up stuff and its better just to replace it, but yeah, Any one know what the problem could be if not that? thanks

Re: Idle Problem on a 2000 4.6
 

Do you seriously mean 50 -100 rpms? Anyway, you definately have an IAC problem. But also, your base idle could be set too low.

Here is what you need to do:

1 - Start the car.

2 - Open the hood and unplug the wire harness that goes to the IAC. When you do this, the car shout NOT die. It should almost die, but NOT die. If it runs too smoothly, then the base idle is set too high. If it dies, then the base idle is set too low. If it dies, adjust the idle set screw on the throttle body in order to open the butterfly just a tad. Then restart the car to check the setting again. Keep making adjustments until it's right. (your SES will come on btw). If you don't need to do anything, then don't wory about it.

3 - Remove the IAC and claen it with some intake cleaner that is labled for throttle bodies. Soak it good. You can't damage anything. If that does not work, replace the IAC.

Let me know how you make out.

PS - you need to clear the SES

Re: Idle Problem on a 2000 4.6
 

Thanks i just got done trying all that besides buying a new IAC and when i turn the car it starts at around 300 RPMs then it drops down after i rev it alittle to almost about to stall :/

Re: Idle Problem on a 2000 4.6
 

I've just replaced the IAC, and i'm still having the same problem, blah i'm confused.

Re: Idle Problem on a 2000 4.6
 

Ryan, we have talked a few times and I have gotten your PM's....R U still having problems with this?

When you put the new IAC on, did you check to make sure the base idle was set correctly? Call me in tomorrow is you need to.

Re: Idle Problem on a 2000 4.6
 

so far everything seems good, i just needa order the new Gauges, I'll let you know how it turns out when i get em in. ty

Re: Idle Problem on a 2000 4.6
 

My gt is having a similar problem what did you guys do to fix yours?