© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-22-2002, 12:24 AM | #1 |
Registered Member
Join Date: Feb 2002
Location: Washington
Posts: 40
|
A disheartened 4.6L owner
I recently bought a 1998 Mustang GT, with a 5sp manual tranny that's in great condition with around 40k miles on it. So far, I have done the things listed in my signature.
I have been talking to people, and everyone is indirectly (and directly) telling me how stupid I was to buy a 4.6L instead of a 5.0L. Some of the comments I have heard include: "Its a torque-turd", "You'll spend twice the money for half the gain on mods as compared to a 5.0L", "They cut out power at high RPMs", and others. Is this true? Am I doomed to waste my money until I can spend $3000 on a Cobra Long Block, Cobra Heads, or a supercharger? Also, I have been told that with my current mods I should be able to run a mid 14 on the track, but when I went, I consistently got 15.9s. What the hell?? My 60 ft times were around 2.6 sec and higher. I have a lot of trouble connecting with my tires on the track. Some help with ideas on what I could get for a relatively small amount of money (I have a rather small budget) to make my car at least semi-respectable on the track would be greatly appreciated (this may include shifting advice, or other driving techniques since I am not an experienced racer). Thank you very much, -A very frustrated 17 yr old mustang owner |
04-22-2002, 06:55 AM | #2 |
Registered Member
Join Date: Apr 2002
Location: Alabama
Posts: 10
|
I don't think I would be that upset. True, 96 thru 98 GTs are slow, but you could change the heads and intake to a 99 up. Would be cheaper than 32v engine. I think 99, 00, and 01 GT are Bad. My brother has one and I think it will stomp any stock 5.0 (he has a stock 2000 GT).
If you wanted to go cheaper, just bolt on the Juice. It don't care what kind of heads you have, only exhaust! |
04-22-2002, 07:43 AM | #3 |
Registered Member
Join Date: Feb 2002
Location: Maryville,TN
Posts: 415
|
Don't let it get you down!
True, The 4.6 parts are more expensive now but prices are droping. The 5.0 parts are cheap but the 5.0 is a out of date platform. Remember this " THERE WILL ALWAYS BE SOMEONE FASTER THAN YOU ! " At "17" you are still a long way from having the baddest car around, unless daddy buys it for you. Enjoy your current car, it may not be the fastest, but is a great begginer car. You will own many,many cars in your life!!~ Mod this car and have fun, learn about driving on the track, and later on sell it and move up to the next best thing. No matter what car you have you will always want more power than you have and someone will always have a badder car than you. Use your current car as a tool to learn on, kindda like a bike with training wheels. Mod and your car will get faster, practice and your times will come down,get a good education and you can aford the good parts!!!
__________________
98 GT / convertable -98 Saleen engine, Saleen appearance pkg. SHM cams,P&P NPI heads, and so much more! |
04-22-2002, 07:51 AM | #4 |
Registered Member
Join Date: Jan 2002
Location: Florence, KY
Posts: 120
|
Yea i agree with Cobra... the 96-98 were slow,... but I have a buddy with a 96 and it has Mac Cold air, Mac Underdrive pulleys, Mac 70mm Throttle body, Mac Full cat back system, 3.73's, Pro 5-0 Power Tower short throw, Sub frame connectors, Computer chip, FMS Plug wires, and a few other minor mods and we got on it the other night... and he was with me the whole time. We didn't really pull on each other... And I have a 2001 V-6 3.8L ....... LOL just playing. I have a 2001 GT. But mine is stock. 5.0's are cheaper to biuld for sure... but I like the 4.6 better my self. Put the bottle on and smoke the 5.0's. But then again the Stock 5.0's are slow as rice anyways. But they are easy to biuld. (and cheap)
__________________
MODS: - Painted Side Mirrors, Straight Pipes, K&N Filtercharger, Modified Air Silencer, Steeda Tremex 3650 Short Throw Tri-Ax Shifter, Saleen MOMO Shifter, Custom Painted Interior, Modified Saleen Racecraft Progressive Sport Springs SLAMMED 3 1/2 inches, Saleen S-281 Wing, Saleen chrome wheels 18x9 front and 18x10 rear, Saleen Locking Lugs, 265-35-ZR18 Toyo Proxes T1-S's, White Face Indiglo Gauges, 9007 Silver Star HID Headlights, Personalized Licence Plate " 2L8 I 1 " (To Late I Won), Chrome Bumper Decal inserts, Lowered Windshield Wiper MOD, MAC Offset rack bushings, 5% Limo Window Tint. |
04-22-2002, 08:50 AM | #5 |
Registered Member
Join Date: Feb 2002
Location: Arlington Heights,IL
Posts: 231
|
I'am also 16 and am struggling to afford my GT and don't have much money for mods right now. Many guys tell me I should've bought a 5.0 but I strongly disagree. The 4.6 is a far better engine than the old pushrod engine by far. The modular aftermarket is growing fast. Very fast. Everyone says the modulars have no aftermarket but remember this: the 5.0/302 (in one form or another) has been in 'Stangs for over 30 years now. As far as I'm concerned, it sure as hell better have a bigger aftermarket than the modulars which have only been in Mustangs for 7 years. The early modulars were slow stock (could still beat a 5 liter stock). Now, the newer stock mod engines can roast even a moderately modded 5.0. Everyone complains about the first mod engines only making 215 horsepower (225 in '98). But, if memory serves me correctly, the best 5 liters only made 245 hp in the '94/'95 Cobras. The 'regular' engines only made 225 hp in the '87-'92 ('93 rated at 205 hp) Fox years. Also, the two valves make great ammounts of torque. The modulars also rev much higher than their pushrod counterparts. As for your 15.9 at the track, that's not so good. My stock '97 is auto and I ran a 15.3. I think your having traction problems because of your 2.6 60-ft. Did you haze the tires a little? Drop the pressure a bit too. It'll help a lot. Last, when do you shift? Shifting late isn't good on a relatively stock GT because it stops making power after about 4800 RPM so shift then. Keep trying! You'll get to 14's. PRACTICE!. I ran a 16.9 my first run if it makes you feel any better.
__________________
'97 Laser Red GT Coupe Stock 2V (Pulled Silencer) 4R70W Automatic Ripped off a BLISTERING 15.37@90MPH With a 2.21 60ft Just Installed- K&N Air Filter Coming Soon...... -4.10's -Flowmaster A/T or Magnapack Cat-Back |
04-22-2002, 09:35 AM | #6 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
Holy cow!! 2.6 60 ft? You did ALOT more than haze the tires. That's some serious tire spinning there. That's a BIG reason why you are running a 15.9. Practice, practice, practice. You NEED to get that 60ft down bigtime. When you go up to the line light the tires up for long enough that they start to smoke and then let off the brake and coast out of it while letting off the gas. It doesn't do much good to roast the crap out of street tires. You basically just want to clean them off when you do your burnout. Launch at around 1800-2000 rpm and don't completely dump the clutch. Kind of "feather" it a bit to try to keep the tires from breaking loose. DO NOT worry about your reaction time and who you are racing. For now concentrate on your launching techniques and getting those tires hooked up. If you still can't get the tires to hook drop your launching rpm's down untill you can get it to hook. If that doesn't work you need some better tires (probably need them anyways). The best tires to get, at least, would be drag radials. BTW, what was you mph on the runs?
96-97 GT= 215 hp @ 4400 rpm; 285 lb/ft @ 3500 Fox 5.0 excluding 93 (which was 205 hp, 275 lb/ft)= 225 hp @ 4200; 300 lb/ft @ 3200
__________________
1967 Mustang Coupe |
04-22-2002, 10:34 AM | #7 |
Registered Member
Join Date: Jul 2001
Location: Seattle, WA
Posts: 381
|
I wouldn't put too much weight on hp ratings. They aren't exactly...umm...rock solid. Especially with the 93s...I am fairly sure it is under-rated. (They couldn't have the previous year cars be faster than the new 94s ). As an example, the 93 cobra had the fastest 0-60 time until the 99 cobras.
I have heard the 96-98 cars are a torqueless turd, but I have been in 98gt5sp's car...and ummm...I don't see it . His best time was 15.6 and he didn't have a run where he didn't mess up in some way. Plus he had no traction, so I think it is more than fair to say that wasn't a fair judge of his car. Plus, he makes it sound like he ran a 15.9 with his current mods, when all he had was his CAI and exahust (just for clarification). I have heard that .2 off of 60' = about .4 off the ET. If this holds true, 2.0 60' would have yielded 14.7 runs. Ahhh, but he doesn't listen to me! Thanks, DoranW
__________________
What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim |
04-22-2002, 11:05 AM | #8 |
Registered Member
Join Date: Mar 2002
Location: St Louis
Posts: 47
|
Practice
You don't need a faster car until you learn how to drive the one you have (the secret of all types of racing.) While you'd be a little faster you'd be wasteing even more power (=money).
|
04-22-2002, 11:11 AM | #9 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
The 93 Cobra did not have the fastest 0-60 times.
Mustang Cobra 1993 1994 1995 1996 1997 1998 Horsepower 235 240 240 305 305 305 Torque 280 285 285 300 300 300 0-60 mph 5.8s 6.2s 6.2s 5.6s 5.6s 5.6s What do you mean they couldn't have the previous cars be faster than the new ones? Sure they could. Stock vs stock the fox bodies are faster than the SN95 94-98 GT's. More hp and torque and LIGHTER (makes a difference) weight. If he can cut down his 60ft times then he should be able to break into the 14s with his car. Wally hit it dead on big time.
__________________
1967 Mustang Coupe |
04-22-2002, 11:18 AM | #10 |
Registered Member
Join Date: Jul 2001
Location: Seattle, WA
Posts: 381
|
Where did you get your numbers from?
Thanks, DoranW
__________________
What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim |
04-22-2002, 11:22 AM | #11 |
Registered Member
Join Date: Jan 2002
Location: Florence, KY
Posts: 120
|
WHAT IS A RESPECTABLE 60FT TIME FOR AN 2001 GT 5SPEED. STOCK? AND WHAT'S A GOOD 1/4 TIME FOR 01 GT 5 SPD?
__________________
MODS: - Painted Side Mirrors, Straight Pipes, K&N Filtercharger, Modified Air Silencer, Steeda Tremex 3650 Short Throw Tri-Ax Shifter, Saleen MOMO Shifter, Custom Painted Interior, Modified Saleen Racecraft Progressive Sport Springs SLAMMED 3 1/2 inches, Saleen S-281 Wing, Saleen chrome wheels 18x9 front and 18x10 rear, Saleen Locking Lugs, 265-35-ZR18 Toyo Proxes T1-S's, White Face Indiglo Gauges, 9007 Silver Star HID Headlights, Personalized Licence Plate " 2L8 I 1 " (To Late I Won), Chrome Bumper Decal inserts, Lowered Windshield Wiper MOD, MAC Offset rack bushings, 5% Limo Window Tint. |
04-22-2002, 11:31 AM | #12 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
TONS of mustang links on this page
Also at the above link was a SVT Cobra page in which I got the specs from called Dean's Mustang Zone:SVT Performance On the 94-95 Cobra I've seen the hp rating vary from 240-245 hp at various sites. The ONLY way I see how the 93 Cobra could have beat the 94-95 in 0-60 is because the 93 is lighter. Steeda: I'd say on stock rubber about a 2.1-2.0 would be pretty good. As far as times on the new 99-up stangs, I don't really know. From what I've heard they are supposed to run around high 13's. Maybe get mid 13s depending on driver, race conditions, etc.
__________________
1967 Mustang Coupe |
04-22-2002, 01:19 PM | #13 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
If you think that the 4.6L motor has no potencial, just talk to the moderator of this forum.
"Yellowjacket" as Hammer calls his 1998 GT puts out around 450HP and that car has beat everything on the street when he and I go for a cruise. He's made LS1's look stupid. Mind you he has a lot more cash in the car, but it still shows the potencial for the early 4.6L V8's. Blowers do wonders for them. And that is what I recommend you save for. |
04-22-2002, 02:25 PM | #14 |
Registered Member
Join Date: Jan 2002
Location: Texas
Posts: 330
|
I have always gotten the insults because I have a 4.6 and not a 5.0 -- Anyone who's is going to insult you because of it doesn't have much going on upstairs in the brain. A lot of people think that the cubic inch size of an engine is all that matters. You can't even compare a 4.6 to a 5.0, they are two totally different engines. They both have their good and bad points, it's all a matter of opinion and preference. If someone tells you 4.6 sucks, tell them where they can put it, most likely they don't know what they are talking about. As far as your times, I would think you roasted the tires off the line. I have a 98 GT w/4R70W, and I took it to the track once I first got it and all I had on there was H-Pipe and chip, I ran a 15.1 in high humidity and spinning the tires down the track. Since then I have added a lot more to the car, and I have handed several 5.0 (auto & 5spd) bumpers back to their owners after a race, as well as some new 99+ cars too. When it comes down to it, no one elses opinion about your car matters but yours. There will always be a person who likes it, and some one who hates it. That's just how it goes in the car world. It's too bad people can't just respect someone elses car and not always try to show them up or make them look bad. Not all of us are out to win races. Amen, Church is adjurned!!
__________________
// 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\ |
04-22-2002, 03:03 PM | #15 |
Registered Member
Join Date: Jan 2002
Location: Florence, KY
Posts: 120
|
98STEEDAGT : JUST WANTED TO SAY YOU DID A GOOD JOB ON YOURS. LOOKS GREAT MAN. LATER.
__________________
MODS: - Painted Side Mirrors, Straight Pipes, K&N Filtercharger, Modified Air Silencer, Steeda Tremex 3650 Short Throw Tri-Ax Shifter, Saleen MOMO Shifter, Custom Painted Interior, Modified Saleen Racecraft Progressive Sport Springs SLAMMED 3 1/2 inches, Saleen S-281 Wing, Saleen chrome wheels 18x9 front and 18x10 rear, Saleen Locking Lugs, 265-35-ZR18 Toyo Proxes T1-S's, White Face Indiglo Gauges, 9007 Silver Star HID Headlights, Personalized Licence Plate " 2L8 I 1 " (To Late I Won), Chrome Bumper Decal inserts, Lowered Windshield Wiper MOD, MAC Offset rack bushings, 5% Limo Window Tint. |
04-22-2002, 04:00 PM | #16 |
Registered Member
Join Date: Jan 2002
Location: Texas
Posts: 330
|
Thanks, I have entered Steeda's monthly contest to get my Serial Tag. I know it's not the same as the original Serialization Numbers, but it would be considered a Steeda Collectors Edition GT. I am still working on the car right now, but I have about 85% of what the real Steeda's came with that year...
Full specs and progressive history link below. This is on my WWW machine at the house. http://www.superrobots.net/steeda_gt_mustang.htm
__________________
// 1998 GT-Steeda Conversion \\ -- Sold // Now own 2001 F-150 SuperCrew 5.4L \\ |
04-23-2002, 01:32 AM | #17 |
The Redneck James Bond
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
|
I use to be ragged on for having a "Slow Point Six" (4.6), till I started actually racing. I think me and Tim C are the main reason why the 5.0, LT-1, and LS-1 Guys started respecting the 4.6's here in Fayetteville.
The 4.6 is starting to get one hell of a strong aftermarket going. Its already more than the LT-1 and LS-1 combined has, and its getting cheaper also. I use to hate the 4.6 intenesely, till I got went for a ride in a 99 GT 35th anivesary edition with a 5spd. I was so impressed that I went out and bought one shortly after.
__________________
64 1/2 "D" code Red Mustang Coupe. Red Baron, 2000 Perf Red Mustang GT. 5spd. Stage 2 CNC heads with Large Valves, Comp Cams (270-274 dur .550 lift), Forged Crank, DRP pistons, Manly H-beams, Pro M 87 mm Mass Air, 24lb Inj, 75mm TB, Plenum Spacer ,Long Tube Headers, Homemade H-pipe, 2 chamber Flows, 4:10's, Steeda Tri-Ax, LKW 70/30's, Eibach Drag Springs, Steeda SubFrames, Battle Boxes, Rear Girdle, Adj uppers, Alunimum Drshft, Southside Lift Bars. Project Cars, 64 1/2 6cyl coupe, 1930 Model A Nostalgia Rod. |
04-23-2002, 09:10 AM | #18 |
Registered Member
Join Date: Feb 2002
Location: Arlington Heights,IL
Posts: 231
|
The 5.0 guys bash the 4.6 because things are changing and the 4.6 is starting to have one HELL of an aftermarket. Merc, your right about the 4.6 already having twice the aftermarket of the LS-1 and the LT-1 combined and those engines have been in F-Bodies for quite some time now. The only things the 4.6 is still lacking are cylinder heads, cams (Quite a few available now), and some affordable intake manifolds. We need more than just FRPP and smaller companies like SHM or PHP for aftermarket stuff. It's time venerable companies like Holley and Edelbrock start making stuff for our cars. Don't they realize the 4.6 is becoming the next 5.0 in terms of popularity. The sissy mods like cold air and U/D pulleys aren't enough. We need more parts!
__________________
'97 Laser Red GT Coupe Stock 2V (Pulled Silencer) 4R70W Automatic Ripped off a BLISTERING 15.37@90MPH With a 2.21 60ft Just Installed- K&N Air Filter Coming Soon...... -4.10's -Flowmaster A/T or Magnapack Cat-Back |
04-24-2002, 01:44 PM | #19 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
OMG!!!! This forum is funny as hell....."5.0's slow as rice" OMG!!!!!
I smoke 4.6's all day with a 14.2 at the track @3000ft.... I still think the 5.0 is king at the strip when on any given night there are 10 plus 5.0's in the 10-12 second range and maybe three modular stangs in the 13's.. Funny stuff later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
04-24-2002, 02:09 PM | #20 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
Give it time Dark, give it time...
Considering I have first hand knowledge of how doggishly slow early 5.0s were (the continual 83 restore), and how the aftermarket for the push-rod is about 2,000 times larger than the 4.6, and considering that the parts cost about a 1/3 of corresponding parts on a 4.6, I think the modular motors are doing quite well.... Also, when did a stock 5.0 GT ever put out 260 hp to the flywheel? oh yea, hehe, never.... Don't get me wrong, the 5.0 is one heck of a venerable engine that is easy to work on and relatively cheap to make fast, but give the 4.6 its due. Other than the original 96-98 intake debacle, these engines are pretty darn reliable, and make darn good power when modded.... To be honest, I love all stangs, but when someone with a "4.6s suck" attitude comes along, wheather they be in an LS1, 5.0, or a turbo 4, I'm usually the first one to hand him his rear-end at the track...
__________________
Uncle Sam "What the hell is up with all the gauges? Calling Captain Kirk, your ride awaits... Phasers on stun...." |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
4.6l Race | PowerSlideGT | Windsor Power | 4 | 05-10-2004 11:13 PM |
Pinging or knocking in my 2000 GT 4.6L | SoulKeeper | Modular Madness | 15 | 03-31-2003 09:54 AM |
Please Help!! - 4.6L Prob.s | 98gt5sp | Modular Madness | 2 | 07-09-2002 08:57 AM |
5.0L vs 4.6L comparison | tchm | Windsor Power | 3 | 07-22-2001 09:07 PM |
New 4.6L Tbird, parts? | 91LX2Bfast | Modular Madness | 0 | 10-11-2000 03:54 PM |