To Throttle or Not to Throttle

[97snakedriver]

I'm planning on supercharging in about a year or so. Before then, I'm probably going to do some suspension work. But as long as I'm at it, do you guys think a larger throttle would be worthwhile before the blower goes on?

Modifications are in sig.

Thanks.

------------------
1997 Cobra
Suspension: Steeda G Trac. Tokico Illumina shocks and struts (5 front, 3 rear), Sport Springs, upper and lower control arms, cc plates, rear adjustable sway bar, front sway bar, subframe connectors, bushings, 95 Cobra R wheels, X-Brace, Brembo 4 piston brakes (2000 Cobra R) w/ Brembo slotted rotors
Exhaust: FRPP ceramic coated headers, Bassani X-pipe w/ cats, Dynomax Ultra Flow cat-back
Bolt-ons: 4.10s, Steeda Tri-Ax, Pro-M 80mm, K&N, Steeda Underdrive

[97snakedriver]

Add a timing adjuster to that list....

I need to update my sig to meet the new rules.

[Mustang92]

A larger throttle body wouldn't hurt that is for sure. NA you won't see a really big gain but will help when you add the blower.

------------------
00 GT, K&N, MAC Tree Killer, Pullies, 4.10’s, 2 chamber Flowmasters, UPR shifter, Weld Pro Stars, Nitto DR’s 13.35@100.02 (1.88 60ft)MM#100
88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool, more to come

[King Snake]

I hear the FRPP 60mm dual TB give a 10 HP gain on a N/A engine. There are also TBs available without the center part, instead it is one big oval opening. I believe the V10 may come with this but I am not positive. But if you get 8-10 HP with N/A the gains would probably be consideralbly more with a S/C. What huffer do you plan on using? S-trim?

------------------
'97 Cobra, MAC Cold Air Kit, 3.73s, Rio Red

[97snakedriver]

I'll probably go with the Vortec SQ blower. I'm not real wild about the air/water aftercooler. I'd prefer air/air. But of the manufacturers who actually publish their compressor maps, Vortec is much more efficient in the boost/flow range I'm interested in.


-----
Darn Englursh leads to...

[This message has been edited by 97snakedriver (edited 11-30-2000).]

[King Snake]

Just got the 2001 FRPP catalog and they have an oval bore TB for the 4V engines. They say it offers 30% more flow than stock, but requires minor modification to the intake manifold bridge to function. This would probably work WELL with a blower, but at $425 it is expensive. Or spend $300 and get the BBK dual bore.

[Try Me]

There is no question!
W.O.T!!!