95 GT Mass Air Flow help

1995gtStang · 07-26-2003, 12:43 AM

I remembered reading on here that Kenne Bell and Ford are the only two makers of MAF Sensors that are specifically calibrated for injectors. And most other companies just trick the ecu into thinking it has less air coming in etc. I recently found a problem with my stock error code 157 - MAF - low voltage and figured it's a good time to replace it anyway.

I'm looking for a 73mm MAF Sensor, direct bolt-on, calibrated for 19lbs injectors since I dont' have many mods to my mustang at all no point in upping the injectors flow. So anyone have any links to a good starting point to get one? Any links or advice from personal experience?

1995gtStang · 07-26-2003, 12:52 AM

Also at which point should I start thinking about upgrading my fuel pump (still stock at the moment).

95mustanggt · 07-26-2003, 08:09 AM

I replaced mine with a Granatelli 75 mm unit (Pro-M). They are a little more expensive, but come with new electronics, unlike the 73 mm vortech unit.

I recommend a Pro-M 75 mm unit.

Most performance shops sell them (Summit Racing, Dallas Mustang) . Just make sure you tell them wheather you want one with a flange (for replacement in the stock air box) or without (for aftermarket cold air kits).

07-26-2003, 12:43 AM	#1
1995gtStang Registered Member Join Date: Jul 2003 Location: Nebraska Posts: 6	95 GT Mass Air Flow help I remembered reading on here that Kenne Bell and Ford are the only two makers of MAF Sensors that are specifically calibrated for injectors. And most other companies just trick the ecu into thinking it has less air coming in etc. I recently found a problem with my stock error code 157 - MAF - low voltage and figured it's a good time to replace it anyway. I'm looking for a 73mm MAF Sensor, direct bolt-on, calibrated for 19lbs injectors since I dont' have many mods to my mustang at all no point in upping the injectors flow. So anyone have any links to a good starting point to get one? Any links or advice from personal experience?

07-26-2003, 12:52 AM	#2
1995gtStang Registered Member Join Date: Jul 2003 Location: Nebraska Posts: 6	Also at which point should I start thinking about upgrading my fuel pump (still stock at the moment). __________________ 1995 Mustang GT ----------------------------------- 1. BBK Cold Air Intake 2. Flowmaster Catback AT II Exhaust 3. Under Drive Pulley 4. Researching 73mm MAF Sensors atm. -----------------------------------

07-26-2003, 08:09 AM	#3
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	I replaced mine with a Granatelli 75 mm unit (Pro-M). They are a little more expensive, but come with new electronics, unlike the 73 mm vortech unit. I recommend a Pro-M 75 mm unit. Most performance shops sell them (Summit Racing, Dallas Mustang) . Just make sure you tell them wheather you want one with a flange (for replacement in the stock air box) or without (for aftermarket cold air kits). __________________ 1995 Mustang GT 20016 F150 Lariat Super Crew

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z28 vs. "GT"	Smokedawg	Stang Stories	30	05-13-2005 02:12 AM
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
Mustang gt plans	PowerSlideGT	Blue Oval Lounge	1	08-11-2004 10:21 AM
Tips on buying an 87 GT(is it really a GT?)	LincoConti87	Windsor Power	9	07-23-2004 08:08 PM
'02 GT Drop top Vs. '94 Cobra	EZRIDN	Stang Stories	3	03-26-2004 04:23 PM