full length headers on an 01

Ross42 · 04-21-2003, 10:21 PM

I have a 01 GT and I want to put full length headers on it but I don't know if they will fit because it's an Auto. I'm wondering if anyone knows or has possibly already done it before I go ahead and by them.

Mustang92 · 04-22-2003, 01:22 PM

I've heard of some people making the MAC LTs fit the autos by moving one of the o2 sensor bungs. I think it's the passenger side one that would hit the tranny so they have it plugged and moved over. Other than that I'm not sure if any auto owners have tried the Hooker or BBK headers on their cars.

Bill

V8Mustang · 04-22-2003, 03:17 PM

I've not personally installed MAC's LTs on an auto car but we've not had any complaints from those we've sold them to. If you do have to plug a bung, you can use an oil drain plug (possibly an 18mm; don't quote me), then have a new bung welded in.

jj_jonathon · 04-22-2003, 10:52 PM

i do believe some brands make LTs specifically for automatics...

Tony Frank · 04-26-2003, 07:38 PM

Albright, is that you?

MAC's website doesnt say much about longtubes and an auto

call them at 1800-367-4486
or at 909-296-3077

04-21-2003, 10:21 PM	#1
Ross42 Registered Member Join Date: Apr 2003 Posts: 5	full length headers on an 01 I have a 01 GT and I want to put full length headers on it but I don't know if they will fit because it's an Auto. I'm wondering if anyone knows or has possibly already done it before I go ahead and by them.

04-22-2003, 01:22 PM	#2
Mustang92 Drag Racer! Join Date: Nov 1999 Location: Lake Worth, FL USA Posts: 757	I've heard of some people making the MAC LTs fit the autos by moving one of the o2 sensor bungs. I think it's the passenger side one that would hit the tranny so they have it plugged and moved over. Other than that I'm not sure if any auto owners have tried the Hooker or BBK headers on their cars. Bill __________________ 2000 GT VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune. 285 RWHP/296 RWTQ 11.97 @ 113.20 M/M 100, 7085 www.uprproducts.com www.ponyexpressperformance.com www.modulardepot.com

04-22-2003, 03:17 PM	#3
V8Mustang Registered Member Join Date: Mar 2003 Location: NC Posts: 64	I've not personally installed MAC's LTs on an auto car but we've not had any complaints from those we've sold them to. If you do have to plug a bung, you can use an oil drain plug (possibly an 18mm; don't quote me), then have a new bung welded in. __________________ www.CRmotorsports.com Ford Performance Parts

04-22-2003, 10:52 PM	#4
jj_jonathon Trisket Join Date: May 2002 Location: University of Florida, FL Posts: ½ Posts: 1,560	i do believe some brands make LTs specifically for automatics... __________________ University of Florida - Physics Major My 02GT vert Media Center Pics BBK Underdrive Pulleys \| K&N FIPK (Gen II) \| Bullet Grille \| Mach 1 Chin Spoiler \| UPR Interior Parts \| XM Radio \| Audiobahn Subs Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/

04-26-2003, 07:38 PM	#5
Tony Frank Registered Member Join Date: Feb 2001 Location: Brooklyn originally, but Grand Rapids now Posts: 309	Albright, is that you? MAC's website doesnt say much about longtubes and an auto call them at 1800-367-4486 or at 909-296-3077 __________________ Grand Valley State University Senior Accounting and Finance Major 1985 Mustang GT 19,000 ORIGINAL miles, E-303 cam, edelbrock performer RPM intake, holley 600 cfm carb, MAC headers, windage tray, 8.8 rear end with 4.10 gears, 4"cowl hood, 5lug conversion, 04 Mach1 wheels. http://www.mustangworks.com/cgi-bin/moi-display.cgi?1501

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
headers	V 8's 4 life	Stang Stories	5	01-16-2004 08:12 PM
exhaust	Tikitoes	Modular Madness	19	10-23-2003 04:18 PM
SVO Shorty Headers 1-5/8 Question	stangposse	Windsor Power	0	08-07-2003 12:48 PM
Buying new headers	TwiLighTBluEGT	Windsor Power	4	04-23-2003 08:55 PM
BBK shorties --> MAC Full Length	SmokeyDP	Windsor Power	11	01-06-2001 09:04 PM